1 November 2010 in Petroleum Chemistry
The alkylation of benzene with dodecene-1 has been studied over catalysts with a combined micro-mesoporous structure with different amounts of mesopores obtained by the hydrothermal recrystallization of Beta and mordenite zeolites. The main features of the reaction of benzene alkylation with dodecene-1 over the micro-mesoporous catalysts have been established. The formation of transport pores and an increase in the accessibility of acid sites as a result of recrystallization under mild conditions facilitate an increase in the activity, with a high selectivity for linear phenyldodecanes being retained; a higher degree of recrystallization to MCM-41 leads to a decrease in the conversion and selectivity; the mordenite-based catalysts are more active than zeolite Beta.
1 October 2018 in Petroleum Chemistry
Approaches to the synthesis of hierarchical MWW zeolites by the pillaring, delaminating, and recrystallization methods are surveyed and systematized. The influence of the characteristic...
1 March 2016 in Petroleum Chemistry
The production of isobutylene from acetone over micro–mesoporous catalysts with different mesopore contents, which have been prepared using hydrothermal recrystallization of mordenite (MOR) zeolite modified with cesium acetate by incipient wetness impregnation, has been studied. It has been shown that cesium is inserted into the cation positions during the modification, at the same time the number of Brønsted acid sites in the samples decreased. It has been found that an increase in the content of mesopores in the catalyst leads to an increase in the initial rates of acetone conversion and isobutylene formation as a result of removing diffusion limitations. Brønsted acid sites have been shown to be preferable for the selective production of isobutylene from acetone. Micro–mesoporous materials operate more stably as compared to microporous materials.
1 December 2017 in Petroleum Chemistry
Zeolite MCM-22 (MWW framework type) refers to a class of promising molecular-sieve catalysts that have unique morphology, microporous structure, and physicochemical properties. Studies on the...
1 October 2015 in Catalysis in Industry
1 June 2006 in Russian Journal of Physical Chemistry A
The alkylation of phenol with methanol on HY and CsY/CsOH catalysts was studied in situ under static conditions by 13C NMR spectroscopy. Attention was largely given to the identification of intermediate compounds and mechanisms of anisole, cresol, and xylenol formation. The mechanisms of phenol methylation were found to be different on acid and basic catalysts. The primary process on acid catalysts was the dehydration of methanol to dimethyl ether and methoxy groups. This resulted in the formation of anisole and dimethyl ether, the ratio between which depended on the reagent ratio, which was evidence of similar mechanisms of their formation. Subsequent reactions with phenol gave cresols and anisoles. Cresols formed at higher temperatures both in the direct alkylation of phenol and in the rearrangement of anisole. The main alkylation product on basic catalysts was anisole formed in the interaction of phenolate anions with methanol; no cresol formation was observed. The deactivation of acid catalysts was caused by the formation of condensed aromatic hydrocarbons that blocked zeolite pores. The deactivation of basic catalysts resulted from the condensation of phenol and formaldehyde with the formation of phenol-formaldehyde resins.