20 October 2025 in Acta Astronautica
30 June 2021 in International Journal of Aerospace Engineering
In order to enable the micro-nanosatellites equipped with microthrusters to better complete various space applications, it is necessary to estimate the thrust performance of the microthrusters in real-time on orbit. This paper proposes a real-time on-orbit estimation method for microthrust based on high-precision orbit determination. By establishing a high-precision orbit dynamic model, the microthrust generated by a microthruster is modeled as a first-order Markov model, combined with a high-precision GNSS measuring device, and the satellite position is obtained through the cubature Kalman filter algorithm, velocity, and thrust real-time on-orbit estimates. For a thrust of 100μN, the error accuracy of the on-orbit estimation is 3.98; for a thrust of 500μN, the error accuracy is 1.79; for a thrust of 5mN, the error accuracy can be reduced to 1.43; and when the thrust is 500μN, the accuracy of orbit determination is 16cm. This method solves the problem that the traditional on-orbit thrust estimation method cannot perform real-time on-orbit estimation of microthrust on the order of hundreds of μN. The real-time on-orbit estimation of microthrust of micro-nanosatellites equipped with microthrusters of the order of hundreds of micronewtons or even several mN to tens of mN has certain reference value.
1 March 2022 in Journal of Aerospace Engineering
The development of nanosatellites is inseparable from micropropulsion systems, and a micropropulsion system cannot be separated from the evaluation of its micropropulsion performance. Although the ground measurement system is relatively mature, it is difficult to simulate accurately the space environment due to the complexity of the space environment. Therefore, it is necessary to estimate the on-orbit microthrusters. This paper presents an on-orbit thrust estimation system for microthrusters based on a closed-loop attitude control system. The magnetorquers and the microthruster are used as attitude actuators, and the torque generated by the microthruster is used to compensate for the environmental disturbance torque and the known disturbance torque generated by the magnetorquers. In addition, the cubature Kalman filter algorithm based on a gyro-free star sensor was used to estimate the satellite attitude information with high precision. In the on-orbit simulation experiment for microthrusters on the order of tens of micronewtons to tens of millinewtons, the error of 100 μN was 5.67%, and the error of 10 mN was reduced to 2.54%. This method solves the problem of the low accuracy of the traditional on-orbit thrust estimation method when estimating the thrust of a microthruster on the order of 100 μN, and it enables a nanosatellite equipped with the microthruster to complete various space application tasks better.