The results of investigations of the hardness and wear resistance of the working sections of machines, hardened using cermet materials in the form of paste, are presented. The optimum composition of the paste which greatly increases the service life of the working sections of the machines is determined.
The results of investigation of the thickness and microhardness of electrospark coatings (ESCs) of amorphous and nanocrystalline alloys (NCAs) are presented. It is shown that the application of amorphous and NCAs as electrode materials increases the thickness of ESCs and the produced coatings are characterized by high hardness.
1 July 2017 in Surface Engineering and Applied Electrochemistry
Theoretical and experimental studies revealing the physical essence of electric spark deposition (ESD) are presented. The mathematical model is developed for mass transfer during low-voltage ESD of the electrode material, which makes it possible to calculate the mass of material being transferred from the anode to the cathode and control this parameter by changing the initial voltage, the capacitance of the capacitor unit, and the amplitude and vibration frequency of electrode. The mathematical model is confirmed by an experimental study of erosion traces left by electrodes made of amorphous alloys based on cobalt (84KKhSR) and iron (2NSR). The regression exponential dependences of the mass of the material deposited on the cathode on the initial voltage are plotted. The discrepancy between the calculated and experimental values of the mass of material deposited on the cathode does not exceed 5%.
The tribotechnical characteristics of electrospark coatings of amorphous and nanocrystalline iron alloys have been determined. The influence of the crystalline phase on the wear rate of electrospark...
1 January 2018 in International Journal of Nanotechnology
This paper discusses properties of the wear-resistant coating made of the 5BDSR nanocrystalline alloy obtained by the electric spark method (Finemet). It has been proved that an electric spark coating has a nanocrystalline structure which resembles the amorphous matrix with nanocrystals α-Fe. The coating thickness is 33 µm, its microhardness is 8461-11,357 MPa, and the wear resistance is 0.55 × 10
31 July 2018 in Journal of Physics: Conference Series
The paper presents the results of a study of the physicomechanical properties of oxide-ceramic coatings formed by plasma electrolytic oxidation on various aluminum alloys. It has been found that filling the pores of an oxide-ceramic coating with oil or applying a copper layer to its surface with a friction-mechanical method increases the wear resistance of movable joints of machine parts by 1.7 times and 4.5 times, respectively. Based on the complex of studies carried out, combined methods are proposed that significantly increase the life of reinforced parts of machines in operation.