1 March 2019 in Progress in Polymer Science
16 February 2016 in Polymer Chemistry
There is a growing interest to develop green synthetic pathways towards industrially relevant polymers such as polyurethanes without the use of toxic and dangerous isocyanate monomers. The most promising route towards non-isocyanate polyurethanes (NIPUs) is the aminolysis of dicyclic carbonates derived from renewable resources. Although, cyclic carbonates of 5- and 6-members have been successfully proposed, aminolysis of these compounds requires the use of high temperatures to obtain high conversions and subsequently high molecular weight NIPUs. Indeed, these cyclic carbonates do not allow the achievement of high molecular weight NIPUs using low reactive diamines analogous to two of the most industrially relevant aliphatic diisocyanates. Herein, we report a (bis) N-substituted 8-membered cyclic carbonate that could be prepared from naturally abundant epoxides, diamines and dimethyl carbonate using sustainable chemical routes. This N-substituted 8 membered cyclic carbonate appeared to be much more reactive than the smaller 5- and 6-membered cyclic carbonates. Due to this increased reactivity, we obtained high molecular weight NIPUs using a variety of diamines, including industrially relevant hindered aliphatic diamines, such as 5-amino-1,3,3-trimethylcyclohexanemethylamine (IPDA) and 4,4′-methylenebis(cyclohexylamine). The synthesis of NIPUs was demonstrated at room temperature without the need for any additional catalyst. Altogether, this paper shows that (bis) N-substituted 8-membered cyclic carbonates are ideal starting materials for the synthesis of sustainable non-isocyanate polyurethanes (NIPUs).
24 May 2022 in Nature Communications
Vinyl polymers are the focus of intensive research due to their ease of synthesis and the possibility of making well-defined, functional materials. However, their non-degradability leads to environmental problems and limits their use in biomedical applications, allowing aliphatic polyesters to still be considered as the gold standards. Radical ring-opening polymerization of cyclic ketene acetals is considered the most promising approach to impart degradability to vinyl polymers. However, these materials still exhibit poor hydrolytic degradation and thus cannot yet compete with traditional polyesters. Here we show that a simple copolymerization system based on acrylamide and cyclic ketene acetals leads to well-defined and cytocompatible copolymers with faster hydrolytic degradation than that of polylactide and poly(lactide-co-glycolide). Moreover, by changing the nature of the cyclic ketene acetal, the copolymers can be either water-soluble or can exhibit tunable upper critical solution temperatures relevant for mild hyperthermia-triggered drug release. Amphiphilic diblock copolymers deriving from this system can also be formulated into degradable, thermosensitive nanoparticles by an all-water nanoprecipitation process.
17 February 2017 in Langmuir
18 July 2017 in ACS Biomaterials Science & Engineering
ACAitziber L. Cortajarena
+4
Polymers exhibiting both antimicrobial and biodegradable properties are of great interest for next generation materials in healthcare. Among those, cationic polycarbonates are one of the most promising classes of materials because of their biodegradability, low toxicity, and biocompatibility. They are typically prepared by a chemical postmodification after the polymer has been synthesized. The main problem with the latter is the challenges of ensuring and verifying complete quaternization within the polymer structure. Herein, we report the first example of synthesizing and polymerizing charged aliphatic cyclic carbonates with three different alkane pendant groups (N-methyl, N-butyl, and N-hexyl) by ring-opening polymerization (ROP). These charged eight-membered cyclic carbonates displayed extraordinary reactivity and were even polymerizable in polar solvents (e.g., DMSO) and in catalyst free conditions that are generally unobtainable for other ring opening polymerization processes. A computational study was carried out and the findings were in agreement with the experimental data in regards to the dramatic increase in reactivity of the charged monomer over their neutral analogs. Furthermore, a series of hydrogels were prepared using the different charged eight-membered cyclic carbonates, and we found it to have a significant impact on the hydrogels’ ability to swell and degrade in water. Finally, the hydrogels demonstrated antibacterial activity against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive). These materials could be ideal candidates for biologically relevant applications where cationic structure is required.
27 March 2018 in Polymer Chemistry
Aliphatic polycarbonates are promising materials in the biomedical field due to their low toxicity, biocompatibility, and biodegradability. A popular approach in obtaining these materials is through the organocatalyzed ring-opening polymerization (ROP) of cyclic carbonates. Functional polycarbonates can be obtained by (co)polymerizing allyl-functional cyclic monomers, which can be chemically modified via radical thiol–ene click reactions after the ROP process. To date, allyl-bearing 6-membered cyclic carbonates have been reported, however their polymerization kinetics are slow. In previous works, larger cyclic carbonates (e.g. N-substituted eight membered cyclic carbonates) have demonstrated superior reactivities over their smaller counterparts and hence, in this work, we investigated the preparation and ROP of two allyl bearing N-substituted eight membered cyclic carbonates. One of these monomers, with a pendent carbamate group, displayed substantially enhanced polymerization kinetics that allowed for efficient homopolymerizations and co-polymerizations with commercially available monomers (e.g. trimethylene carbonate, or TMC). Lastly, the polymers underwent almost quantitative post-polymerization modification via thiol–ene chemistry to yield different functionalized polycarbonates. We also demonstrated that the post-polymerization reaction could be used to form polycarbonate-based gels with multifunctional thiols.