This research explores the adsorption (AD) of diclofenac sodium (DS) onto a Hydrothermally produced activated carbon impregnated with ZnO (HTC‐AC/ZnO) surface, considering various factors such as initial concentration (IC), adsorbent dose, contact time, and pH. The characterization of HTC‐AC/ZnO was performed using X‐ray diffractometer (XRD), scanning electron microscope (SEM), Fourier‐transform infrared spectroscopy (FTIR), and nitrogen physisorption spectroscopy (BET). Tests were conducted with different adsorbent doses (0.5–4 g/L) at 303 K and various initial diclofenac concentrations (ranging from 50 mg/L to 250 mg/L) to observe their effects. Additionally, pH values were altered from 2 to 12 to study their influence on AD. Kinetic studies, thermodynamic studies, and AD isotherm models were examined. The Temkin isotherm model (TIM) was found to be the most accurate for DS‐AD on HTC‐AC/ZnO. For DS‐AD on HTC‐AC/ZnO, pseudo‐first‐order models (PFOM), intraparticle diffusion model (IPDM), and pseudo‐second‐order models (PSOM) were applied, with a correlation coefficient of 0.945, indicating a good fit for PFOM. The kinetics suggested rapid adsorption. Notably, the HTC‐AC/ZnO composite exhibited consistent AD characteristics across four consecutive cycles, with a removal efficiency exceeding 99.38%. This suggests that HTC‐AC/ZnO is an appropriate and economically viable adsorbent for the elimination of DS from water‐based solutions. The investigation provides compelling evidence that HTC‐AC/ZnO is a viable adsorbent for the effective elimination of DS from water sources.
Rare Earth Elements (REEs) constitute indispensable raw materials and are employed in a diverse range of devices, including but not limited to smartphones, electric vehicles, and clean energy technologies. While there is an increase in demand for these elements, there is a global supply challenge due to limited availability and geopolitical factors affecting their procurement. A crucial step in manufacturing these devices involves utilizing highly pure REEs, often obtained through complex and non-sustainable processes. These processes are vital in isolating individual REEs from mixtures containing non-REEs and other REEs. There exists an urgent requirement to explore alternative techniques that enable the selective recovery of REEs through more energy-efficient processes. To overcome the limitations mentioned above, we have developed a microbead-based technology featuring immobilized lanthanide binding peptides (LBPs) for the selective adsorption of REEs. This technology does not require the utilization of external stimuli but uses gravity-based separation processes to separate the bound REE from the unbound REE. We demonstrate this technology's potential by enriching two relevant REEs (Europium and Terbium). Furthermore, despite their similar chemical properties, we present the distinctive binding preference of the LBPs for a specific rare earth element over another. Moreover, these LBPs exhibit no binding affinity towards other frequently encountered industrial ions. Finally, we demonstrate the recovery of REEs through a change in system conditions and assess the reusability of the microbeads for subsequent adsorption cycles. We anticipate that this approach addresses the challenges of REE recovery and demonstrates the potential of biomolecular strategies in advancing sustainable resource management.
31 October 2026 in Korean Journal of Chemical Engineering