1 October 2020 in Journal of Ecological Engineering
The paper presents the results of the investigation of efficiency of potassium ferrate application in water conditioning processes: oxidation of pollutants of different composition by ferrate compounds; clarification of model solutions by coagulation; reduction of corrosive aggressiveness of...
1 May 2021 in Journal of Ecological Engineering
The necessity of development of technical solutions that will allow to reduce carbon monoxide emissions of flue gases of industrial productions is substantiated. It is shown that the most rational design solution to the problem of carbon monoxide pollution during the firing of electrode blanks...
1 November 2022 in Journal of Ecological Engineering
Development of new and modification of existing chemicals, which act not only as binders, but also provide increased retention of fiber and other pulp components on the paper machine grid, accelerate pulp dehydration, and provide special properties (moisture resistance, heat resistance,...
1 January 2022 in Journal of Ecological Engineering
The analysis of water conditioning methods for closed water supply systems is carried out in the work. The expediency of using redoxites based on ion exchange materials to combat corrosion processes in water recirculation systems by preliminary deoxidation of water is shown. Modified ion exchange...
26 December 2024 in Bulletin of National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute". Series "Chemical engineering, ecology and resource saving"
The article analyzes the problems associated with the occurrence of corrosion processes of equipment during oil and gas production. The main anti-corrosion methods and means used in modern conditions are considered. In the vast majority of cases, the corrosion of industrial equipment proceeds by an electrochemical mechanism when the metal is in contact with an aqueous mineralized environment, therefore it is advisable to use the inhibitory protection of the equipment against corrosion processes. It is known that corrosion inhibitors are substances, the introduction of which in relatively small quantities into an aggressive environment causes a noticeable slowing down of metal corrosion. In fact, it is a substance that inhibits the corrosion process due to competitive adsorption with particles of activators and the formation of protective adsorption or phase films on the metal surface, sometimes with barrier properties. Corrosion inhibitors affect the kinetics of electrode processes that occur during corrosion, and are also characterized by the ability to form oxide, hydroxide or other films on the metal and transfer the metal to a passive state. Taking into account the mechanism and conditions of corrosion processes during the extraction and transportation of oil-containing products and gas condensate, a chemical method of equipment protection was chosen for research. Known inhibitors based on phosphonic acids, as well as synthesized substances based on sulfonates, imidazolines, and diamines, were used as chemical agents in the research. As a result of the research, the effectiveness of protecting metals from corrosion was evaluated depending on the composition of the highly mineralized environment, the type of metal, the type of inhibitor and its concentration, and the effectiveness of the developed scale stabilizer (sodium nitrile dimethyl sulfonate) was evaluated in comparison with known reagents. It is shown that the effectiveness of protecting metals from corrosion in water-oil mixtures using alkylimidazoline inhibitors and inhibitors developed on the basis of sunflower oil and polyalkylene polyamine (AC-1), ethylenediamine (AC-2) reaches 90% in doses of 5 - 50 mg/dm3.
10 November 2025 in Матеріали міжнародної науково-практиченої конференції "Екологія. Людина. Суспільство"
Anaerobic digestion (AD) is a process that has found increasing relevance for sustainable waste management and bioenergy production. Nevertheless, microbial interactions and process dynamics make it challenging to maximize and predict biogas production. Recent breakthroughs in artificial intelligence (AI), particularly in artificial neural networks (ANN), have provided new opportunities for solving these problems and drastically enhanced process optimization, predictive capability, as well as perpetual stability. This paper aims to provide a review of recent literature covering the application of AI, specifically Artificial Neural Networks (ANN), integrated with various optimization algorithms, including Genetic Algorithms (GA) and Particle Swarm Optimization (PSO), in anaerobic digestion systems from 2022 to 2024. The results of the evaluation demonstrate that ANN models exhibit a significant improvement over conventional kinetic-based approaches, characterized by lower prediction errors, higher biogas production, and greater robustness.