1 February 2019 in Physics of Fluids
Although microscale phenomena are ubiquitous in fluid flow through nano- or microsized channels and pores, the mechanisms remain unclear. To clarify these mechanisms, we investigate herein Bingham-plastic liquids with electroviscous effects (EVEs) in nano- and microsized circular tubes. The constitutive equation and electroviscous forces are introduced into the governing equations, and approximate analytical solutions are obtained. Velocity reduction results from the combined effects of the Bingham characteristics and EVEs. The Bingham behavior reduces the strength of the EVE electric field, and EVEs increase the width of the flow core. The dimensionless average velocity decreases as the tube radius decreases and goes to zero upon approaching the lower limit of the movable fluid radius (Rm). As the pressure gradient decreases, the average velocity first decreases linearly, then decreases nonlinearly in a concave shape, and finally approaches zero as the pressure reaches the threshold pressure gradient (TPG). The Bingham plastic behavior causes both the Rm and the nonlinear flow with TPG, and Rm is still caused by the van der Waals forces under liquid compressibility more obviously. The EVE parameters only affect the degree of nonlinearity when the liquid exhibits Bingham-plastic behavior. These results are consistent with experimentally observed de-ionized water flowing in microscale silica tubes. We infer that the Newtonian fluid displays the Bingham-plastic behavior in nano- or microsized channels in what we call “microscale effects.” These results elucidate the mechanism that leads to nonlinear or low-speed non-Darcy flow in nano- or microsized channels and pores from the liquid characteristic and liquid-solid interaction.
1 October 2020 in AIP Advances
This paper reviews recent research on adsorption refrigeration systems. Common and new-type adsorbent–adsorbate working pairs for adsorption refrigeration are summarized and classified. The performance evaluating parameters such as the coefficient of performance and specific cooling power are analyzed for an adsorption refrigeration system, and the influential factors of adsorption refrigeration system performance are investigated from the adsorbent and adsorption bed, respectively. The factors from the adsorbent include the following: the adsorbent particle size, size of micropores inside the adsorbent, total porosity of the adsorbent, and adsorbent stability. Optimization methods for improving adsorbents’ stability are proposed, and four preparation methods for composite adsorbents are summarized. Methods for improving the performance of an adsorption refrigeration system from the adsorption bed are illustrated by examples, including increasing the heat exchange area, improving the surface coating technology, utilizing the heat pipe technology, and designing the multiple adsorption bed system. Among these factors, the working pairs of adsorption refrigeration play the most important role for the system performance, and developing the new type of composite adsorbent to improve the performance and stability is the effective strategy to optimize the system performance. This article also provides suggestions on recent progress and the innovation directions for an adsorption refrigeration system.
20 October 2023 in Journal of Thermal Science and Engineering Applications