Tianyong Gong

Tianyong Gong

Auto-generated profile, based on publicly available information

Tianyong Gong

Southwest Jiaotong University

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
YCYao Cai
Yao Cai
GMGuangtong Ma
Guangtong Ma
YWYiyu Wang
Yiyu Wang
TGTianyong Gong
Tianyong Gong
KLKang Liu
Kang Liu
JZJingsong Zeng
Jingsong Zeng
Superconducting electrodynamic suspension (EDS) train has the unique advantages of excellent levitation and guidance stabilities, large levitation gap, and so on. All of these merits make it a promising candidate for future ultra-high-speed transportations. In order to explore the dynamic characteristics of EDS system with the figure-eight-shaped coil (ground coil), this paper transforms the complex electromagnetic field coupling between superconducting magnets and ground coils into a reduced circuit relationship based on the dynamic circuit theory. Meanwhile, the motion characteristics are introduced to establish the field-circuit-motion coupled model. In this work a faster and more convenient semi-analytical method was proposed to solve mutual inductance. Firstly, the dynamic circuit model of a single side Figure-Eight-Shaped null-flux EDS system was established. The magnetic coupling calculation was carried out between onboard superconducting magnets and ground coils by a semi-analytical method. Furthermore, the time-step iteration method was utilized to solve the induced current governing equation of the ground coil under different operating conditions. The energy method was employed to find the transient solution of levitation force, guidance force and drag force. Secondly, the field-circuit-motion coupled model was validated by experimental data of MLX01 on the Japanese Yamanashi test line. To investigate the influence upon the suspension and guidance caused by different connection types of figure-eight-shaped coil, a cross-connected EDS train dynamic circuit model was built. Finally, based on the field-circuit-motion coupled model, the essential parameters affecting the stability of the system were explored, and the characteristics of system when vertical or lateral displacement occurs were calculated and analyzed. The achievements of this study can provide a reference for the design of the EDS train for future even higher speed trans-portation.

4 December 2017 in Superconductor Science and Technology
Verified
Journal Article
Closed access
PDF file
KLKun Liu
Kun Liu
WYWenjiao Yang
Wenjiao Yang
GMGuangtong Ma
Guangtong Ma
Loic QuevalLoic Queval
Loic Queval
TGTianyong Gong
Tianyong Gong
ZLZhen Luo
Zhen Luo
Three superconducting stacks made of 120 REBCO coated conductor tapes were each fabricated and assembled to obtain several REBCO modules. Their levitation responses over two different permanent magnet (PM) guideways were investigated by experiment and finite element simulation. For the experiment, a test rig was developed that can measure the force in the three directions for any given relative movement between the REBCO stacks and the PM guideway. For the finite element simulation, a 2D H -formulation was adopted. To treat the high aspect ratio of REBCO tapes, an anisotropic homogenization technique was used. The agreement between the measurements and the simulations is good, thus validating the modeling methodology. It was observed from the experiment and simulation results that the perpendicular field contributes to the levitation force whereas the parallel field is responsible for the guidance force, as a result of the existence of anisotropy on the local magnetic stimulation. Based on that, promising REBCO modules including both longitudinal and transverse arrangements of REBCO stacks were proposed and tested, in terms of providing a significant levitation force with the lateral stability preserved. Moreover, a pre-load process able to suppress the relaxation of the levitation force was put forward. To conclude, this study outlines explicit principles to obtain an appropriate layout of coated conductor stacks that could be effective for practical magnetic levitation operation.

31 December 2021 in Superconductor Science and Technology
Verified
Journal Article
Closed access
GMGuangtong Ma
Guangtong Ma
TGTianyong Gong
Tianyong Gong
RWRuichen Wang
Ruichen Wang
SLSonglin Li
Songlin Li
XNXingchao Nie
Xingchao Nie
HCHengbin Cui
Hengbin Cui
The coated conductor magnet, as the onboard magnet of the electrodynamic suspension (EDS) train, is deemed promising due to its relatively high operating temperature, low cooling cost, and good mechanical tolerance, making the liquid-helium-free high-temperature superconducting (HTS) EDS train possible. In order to promote the progress of the HTS EDS train, this work aims at designing, fabricating and testing a coated conductor magnet as the onboard magnet of EDS train. The HTS magnet is designed with the comprehensive considerations of the electromagnetic calculation, thermal–mechanical coupling analysis, as well as the heat load estimation. The magnet is conduction-cooled without any coolant. A radiation shield was used to reduce the heat leakage, enabling the cryogenic system to provide a better low-temperature environment for the magnet. Through a deliberate design, the magnet was fabricated, including two HTS coils and the tailored cryogenic system. Afterwards, the electromagnetic and thermal performances of this magnet were tested and analysed in detail. It was proven that the magnet can be cooled to below 15 K; besides, the magnet has been successfully charged to 240 A. Further increase in the current is possible because of the high safe margin of the critical currents for both the HTS magnet and its current lead, although a slight performance degradation was observed on two double-pancake coils inside the magnet. The present study will provide useful implications for the design and application of onboard HTS magnets in EDS train.

8 January 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TGTianyong Gong
Tianyong Gong
GMGuangtong Ma
Guangtong Ma
RWRuichen Wang
Ruichen Wang
SLSonglin Li
Songlin Li
CYChunxing Yao
Chunxing Yao
LXLing Xiao
Ling Xiao
Superconducting electrodynamic suspension (EDS) train has become a suitable candidate for the future ultra-high-speed ground transportation because of its unique advantages of self-stability suspension and guidance performances, large suspension gap, and high suspension/drag ratio. It is indispensable to develop an efficient electromagnetic modeling method for the EDS train. An analytical model based on the dynamic-circuit theory and virtual displacement method has been proposed, but it has to know exactly the mutual inductance between the on-board magnet and ground suspension coil before calculating the induced current and electromagnetic force. Thus, this article is to establish an efficient 3-D finite element method (FEM) model for the EDS train, in which the mutual inductance is not required. First, the critical current of the REBCO magnet serving as the on-board magnet of the EDS train is estimated. Second, based on the vector magnetic potential method and circuit principle, the 3-D FEM model of the EDS train is established with the magnetic potential boundary condition employed to avoid the moving mesh of on-board magnet. Third, the 3-D FEM model is validated by comparing the analytical results as well as the published measurement data. Finally, the electromagnetic behaviors of EDS train under the guidance offset and suspension offset conditions are investigated with the validated 3-D FEM model.

25 February 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TGTianyong Gong
Tianyong Gong
GMGuang-Tong Ma
Guang-Tong Ma
YCYao Cai
Yao Cai
HQHang-Yu Qian
Hang-Yu Qian
JLJing Li
Jing Li
ZZZhengwei Zhao
Zhengwei Zhao
Electrodynamic suspension (EDS) train has the unique advantages of excellent levitation and guidance stabilities, large levitation gap and so on. All these merits make it a promising candidate for the future ultra-high-speed transportations, in which the HTS linearly synchronous driving motor (LSM) plays an important role because of the decrease of energy consumption of HTS magnet. This paper, served as a fundamental study on the HTS synchronous driving system of EDS train, is aimed to calculate the propulsion force of LSM and optimize the propulsion fluctuation. Firstly, in order to define the operating current of LSM, the critical current of a real-scale REBCO coil was numerically estimated using the so-called T-A model. Secondly, based on the Neumann formula and virtual displacement method, an analytic model to estimate the propulsion force of LSM was established and verified by comparing results with a FEM numerical model. Lastly, by resorting to the validated analytic model, the geometric parameters of propulsion coil were optimized, and then using the optimal parameters, the maximum electromagnetic forces of LSM under different operating conditions of EDS train were calculated. It is found that the linearly driving system inherently keeps robust driving stability to the lateral and normal displacements.

1 February 2017 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GMGuangtong Ma
Guangtong Ma
TGTianyong Gong
Tianyong Gong
HZHan Zhang
Han Zhang
ZWZhitao Wang
Zhitao Wang
XLXingtian Li
Xingtian Li
WZWeihua Zhang
Weihua Zhang
A high temperature superconducting (HTS) linear synchronous motor that uses REBCO-coated conductor as the secondary excitation system was recently demonstrated. Four series-connected REBCO-coated conductor coils were fabricated via the epoxy impregnation technique and the critical current of each coil can be retained by a percent of over 75% at 77 K after winding. Meanwhile, a three-dimensional (3-D) finite-element model was established to describe the coated superconductor coils subject to the traveling magnetic fields of a conventional copper-based stator. The comparison between experiment and simulation in terms of thrust has verified the developed 3-D numerical model, allowing the complex studies of HTS linear motor prior to fabrication. Our preliminary testing has shown that, when the coated superconductor coils were placed over a three-phase stator, the transport dc current in the coated conductor coils will exhibit a significant variation, depending on its magnitude and the operating frequency of stator current as well as the electromagnetic gap.