2 March 2020 in Angewandte Chemie International Edition
22 August 2019 in Angewandte Chemie International Edition
23 August 2021 in Energy & Environmental Science
Severe zinc dendrite growth is a formidable challenge in aqueous zinc-ion batteries during repeated cycles because of the uneven distribution of electric fields on a post-stripping zinc anode. Herein, we demonstrate a totally new nucleation mechanism by introducing cations with high valence (Ce3+ and La3+) into the electrolyte to homogenize electric fields and regulate the zinc deposition behavior. Intriguingly, a detailed evolution investigation of surface morphology discloses that zinc nucleation shifts to progressive nucleation via the preferential adsorption of cation additives from instantaneous nucleation in the addtive-free electrolyte, thereby resulting in the stable zinc stripping/plating behavior. A symmetric cell with 0.01 M Ce2(SO4)3 can be cycled at 5 A g−1 with a lower voltage hysteresis of 83.3 mV for more than 700 h, which is remarkably longer than that of the pristine one (282 h). A higher capacity retention of Zn//NaV3O8·1.5H2O cell (87.0%) after 250 cycles at 5 A g−1 is also achieved in comparison with that in addtive-free electrolyte (68.1%). This work provides new and deep insights into the effects of cation adsorption on zinc nucleation.
12 November 2021 in Small
15 August 2019 in Advanced Science
Lithium metal is the most ideal anode for next‐generation lithium‐ion batteries. However, the formation of lithium dendrites and the continuous consumption of electrolyte during cycling lead to a serious safety problems. Developing stable lithium metal anode with uniform lithium deposition is highly desirable. Herein, a nitrogen plasma strengthening strategy is proposed for copper oxide nanosheet–decorated Cu foil as an advanced current collector, and deep insights into the plasma regulating mechanism are elaborated. The plasma‐treated electrode can maintain a high coulombic efficiency of 99.6% for 500 cycles. The symmetric cell using the lithium‐plated electrode can be cycled for more than 600 h with a low‐voltage hysteresis (23.1 mV), which is much better than those of electrodes without plasma treatment. It is well confirmed that this plasma‐induced nitrogen doping method can provide sufficient active sites for lithium nucleation to enhance the stability of lithium deposition on copper oxide nanosheets decorated on Cu foil and improve the electrical conductivity to greatly reduce the overpotential of the lithium nucleation, which can be extended to other modified current collectors for stable lithium metal anode.
1 March 2020 in Chemical Engineering Journal