9 August 2017 in Nuclear Fusion
The XGC1 edge gyrokinetic code is used to study the width of the heat-flux to divertor plates in attached plasma condition. The flux-driven simulation is performed until an approximate power balance is achieved between the heat-flux across the steep pedestal pressure gradient and the heat-flux on the divertor plates. The simulation results compare well against the empirical scaling λ q 1/ obtained from present tokamak devices, where λ q is the divertor heat-flux width mapped to the outboard midplane, γ = 1.19 as found by Eich et al (2013 Nucl. Fusion 53 093031), and B P is the magnitude of the poloidal magnetic field at the outboard midplane separatrix surface. This empirical scaling predicts λ q ≲ 1 mm when extrapolated to ITER, which would require operation with very high separatrix densities (n sep/n Greenwald > 0.6) (Kukushkin et al 2013 J. Nucl. Mater. 438 S203) in the Q = 10 scenario to achieve semi-detached plasma operation and high radiative fractions for acceptable divertor power fluxes. Using the same simulation code and technique, however, the projected λ q for ITER’s model plasma is 5.9 mm, which could be suggesting that operation in the ITER Q = 10 scenario with acceptable divertor power loads may be obtained over a wider range of plasma separatrix densities and radiative fractions. The physics reason behind this difference is, according to the XGC1 results, that while the ion magnetic drift contribution to the divertor heat-flux width is wider in the present tokamaks, the turbulent electron contribution is wider in ITER. Study will continue to verify further this important projection. A high current C-Mod discharge is found to be in a mixed regime: While the heat-flux width by the ion neoclassical magnetic drift is still wider than the turbulent electron heat-flux width, the heat-flux magnitude is dominated by the narrower electron heat-flux.
3 August 2010 in Physical Review E
A systematic, constructive and self-consistent procedure to quantify nonlocal, nondiffusive action at a distance in plasma turbulence is exposed and applied to turbulent heat fluxes computed from the state-of-the-art full-f, flux-driven gyrokinetic GYSELA and XGC1 codes. A striking commonality is found: heat transport below a dynamically selected mesoscale has the structure of a L\'evy distribution, is strongly nonlocal, nondiffusive, scale-free, and avalanche mediated; at larger scales, we report the observation of a self-organized flow structure which we call the ``E\ifmmode\times\else\texttimes\fi{}B staircase'' after its planetary analog.
30 September 2009 in Nuclear Fusion
Global electrostatic ITG turbulence physics, together with background dynamics, has been simulated in a realistic tokamak core geometry using XGC1, a full-function 5D gyrokinetic particle code. An adiabatic electron model has been used. Some verification exercises of XGC1 have been presented. The simulation volume extends from the magnetic axis to the pedestal top inside the magnetic separatrix. Central heating is applied, and a number, momentum and energy conserving linearized Monte Carlo Coulomb collision is used. In the turbulent region, the ion temperature gradient profile self-organizes globally around R/L
T
= (Rd logT/dr = major radius on the magnetic axis/temperature gradient length) ≃6.5–7, which is somewhat above the conventional nonlinear criticality of ≃6. The self-organized ion temperature gradient profile is approximately stiff against variation of heat source magnitude. Results indicate that the relaxation to a self-organized state proceeds in two phases, namely, a transient phase of excessively bursty transport followed by a 1/f avalanching phase. The bursty types of behaviour are allowed by the quasi-periodic collapse of local E × B shearing barriers.
1 May 2004 in Physics of Plasmas
The fundamental properties of steep neoclassical plasma pedestals in a quiescent tokamak plasma have been investigated with a new guiding center particle code XGC: an X-point included Guiding Center code. It is shown that the width of the steepest neoclassical pedestals is similar to an experimentally observed edge pedestal width, and that a steep pedestal must be accompanied by a self-consistent negative radial electric field well. It is also shown that a steep neoclassical pedestal can form naturally at a quiescent diverted edge as the particle source from the neutral penetration (and heat flux from the core plasma) is balanced by the sharply increasing convective ion loss toward the separatrix. The steep neoclassical pedestal and the strong radial electric field well are suppressed by an anomalous diffusion coefficient of a strength appropriate to an L-mode state; nonetheless, the shearing rate increases rapidly with pedestal temperature. Additionally, the present study shows that a steep pedestal at the diverted edge acts as a cocurrent parallel momentum source.
1 May 2018 in Physics of Plasmas
A fast edge turbulence suppression event has been simulated in the electrostatic version of the gyrokinetic particle-in-cell code XGC1 in a realistic diverted tokamak edge geometry under neutral particle recycling. The results show that the sequence of turbulent Reynolds stress followed by neoclassical ion orbit-loss driven together conspire to form the sustaining radial electric field shear and to quench turbulent transport just inside the last closed magnetic flux surface. The main suppression action is located in a thin radial layer around , where ψN is the normalized poloidal flux, with the time scale ms.
26 September 2013 in Nuclear Fusion