14 September 2021 in IEEE Journal of Solid-State Circuits
This article presents analysis, design details, and measurement result of a 224-Gb/s four-level pulse amplitude modulation (PAM-4) transmitter (TX) consisting of a 7-bit voltage digital-to-analog converter (DAC) driver, digital 8-tap feed-forward equalizer (FFE), and a 28-GHz inductively peaked clock distribution network. The TX DAC uses quarter-rate clocking with a 4:1 pulse-based data serialization architecture. Design techniques for generating and distributing low-jitter CMOS clocks up to 29 GHz, timing closure in the serializer, 112-Gbaud 4:1 data MUX using 1-UI pulse generator, and bandwidth/return loss/group delay optimized output pad network using a 9th-order LC filter are described. Fabricated in the Intel 10-nm FinFET process technology, the TX demonstrates random jitter (RJ) of 65 fs $_{{rms}}$ with nominal output swing of 1.0 $V_{{ppd}}$ at 224 Gb/s achieving 1.88-pJ/b energy efficiency including an on-die LC phase-locked loop (PLL). To the best of authors' knowledge, this TX achieved the highest data rate with the lowest RJ for CMOS SerDes TXs reported to date.
26 October 2022 in IEEE Journal of Solid-State Circuits
A 224-Gb/s pulse amplitude modulation 4-level (PAM4) ADC-based SerDes receiver (RX) is implemented in a 5-nm FinFET process. The RX consists of a low-noise hybrid analog front-end (AFE) that incorporates both inductive peaking and source degeneration, a 64-way time-interleaved ADC, digital equalization consisting of an up to 30 tap feed-forward equalizer (FFE), optional decision-feedback equalizer (DFE), and a clock-data-recovery (CDR) loop utilizing a 14-GHz digitally controlled oscillator (DCO). The RX was characterized for medium-to-long reach channels (20.6-, 27-, 31.4-, and 38-dB insertion loss at Nyquist) with a corresponding pre-forward error correction (FEC) bit error rates of 1.9E-11, 5.2E-10, 1.2E-8, and 6E-7, respectively. The analog power consumption of the RX is 1.41 pJ/b.
8 April 2024 in IEEE Microwave and Wireless Technology Letters
Advancements in 300 mm GaN-on-Si enhancement-mode (E-mode) GaN N-MOSHEMT technology featuring monolithically integrated Si pMOS by layer transfer are presented. In this work, a true gate-last flow is employed, where the high-temperature activation steps of the Si pMOS transistors are completed before depositing the gate dielectric of the GaN N-MOSHEMT. In addition to the Si pMOS integration, GaN N-MOSHEMT performance is enhanced with an $f_{\mathrm{MAX}}$ of 335 GHz ( $L_{G}$ $=$ 90 nm). A mmWave power amplifier (PA) with a high area power density of 3.11 W/mm $^{2}$ and 99.1 dB figure-of-merit is demonstrated using the improved GaN N-MOSHEMT. Employing GaN N-MOSHEMT and Si pMOS, a vector modulator-based mmWave phase shifter with a 5-bit current-controlled digital-to-analog converter (DAC) is designed and fabricated in this process. The phase shifter achieves full functionality with 360 $^{\circ}$ phase tuning coverage, 5.3 $^{\circ}$ measured RMS phase error, and less than $\pm$ 1.7 dB magnitude variation across different phase states, occupying 0.12 mm $^{2}$ . This is the industry’s first demonstration of a complex monolithic GaN-Si CMOS circuit, implemented in 300 mm GaN-on-Si technology.
3 July 2024 in IEEE Solid-State Circuits Magazine
Provides society information that may include news, reviews or technical notes that should be of interest to practitioners and researchers.