Imbalances in hemoglobin (Hb) levels can lead to conditions such as anemia or polycythemia, emphasizing the importance of precise Hb extraction from blood. To address this, a novel synthetic imprinted polymer was meticulously developed for capturing and separating Hb. Poly(acrylamide-vinylimidazole) nanopolymer (poly(AAm-VIM)) was synthesized using acrylamide and vinyl imidazole as functional monomers through surfactant-free emulsion polymerization. Characterization using FTIR, particle size, zeta potential, and SEM ensured the polymer’s structure. The Hb-imprinted nanopolymer (Hb-poly(AAm-VIM)) demonstrated notable specificity, with a calculated Hb-specific adsorption value (Qmax) of 3.7377 mg/g in a medium containing 2.5 mg/mL Hb. The molecularly imprinted polymer (MIP) exhibited approximately 5 times higher Hb adsorption than the nonimprinted polymer (NIP). Under the same conditions, the imprinted nanopolymer displayed 2.39 and 2.17 times greater selectivity for Hb over competing proteins such as bovine serum albumin (BSA) and lysozyme (Lys), respectively. Also, SDS-PAGE analysis results confirmed the purification of Hb by the molecularly imprinted nanopolymer. These results underscore the heightened specificity and efficacy of the molecularly imprinted nanopolymer in selectively targeting Hb atoms among other proteins. Incorporating such polymers is justified by their notable affinity, cost-effectiveness, and facile production. This research contributes valuable insights into optimizing synthetic imprinted polymers for efficient Hb extraction, with potential in medical diagnostics and treatment applications.
17 September 2024 in Journal of Applied Polymer Science
Micro pollutants pose a significant issue in water ecosystems. Particularly high concentrations of 17β‐estradiol (E2) have been identified in agricultural wastewater, which poses harmful effects on aquatic organisms and disrupts ecosystem balance. Therefore, effective determination of E2 from water sources is crucial. This study developed a biosensor capable of detecting E2 in wastewater using specific polymer nanoparticle synthesis through molecular imprinting. Est‐imp‐poly(multi‐walled carbon nanotubes‐glycidyl methacrylate [MWCNT‐GMA]) polymer nanoparticles were synthesized using a surfactant‐free emulsion polymerization method, and their characterization was conducted using FTIR and scanning electron microscopy (SEM) technologies. The Qmax value for Est‐imp‐poly(MWCNT‐GMA) nanoparticles in a 1 mg/mL E2 solution was determined to be 140 ppm. Comparing adsorption capacities, the molecularly imprinted nanoparticles (MIP) showed nearly five times higher E2 adsorption compared to non‐imprinted polymers (NIP). The Est‐imp‐poly(MWCNT‐GMA)‐Nafion/screen‐printed electrode (SPE) system was employed for analyzing wastewater samples. The current measurements taken at various concentrations in the wastewater consistently matched the E2 concentration calibration curve. The limit of detection (LoD) and limit of quantification (LoQ) were determined to be 0.042 and 0.12 μM, respectively. The biosensor demonstrated a linear working range from 0.12 to 50 μM, with a high correlation coefficient (R2 = 0.9927). These results highlight the potential of the developed biosensor for detecting E2 in real samples.
This study presents the development of a novel molecularly imprinted electrochemical sensor for the sensitive and selective detection of vitamin E acetate (VEA) in e-cigarette liquids, a critical step in addressing the rising public health concern of e-cigarette, or vaping, product use-associated lung injury. VEA-imprinted polymeric nanoparticles, intended to serve as the recognition element on the sensor surface, were synthesized using surfactant-free emulsion polymerization. The synthesized polymer was characterized using Fourier Transformed Infrared Spectroscopy, scanning electron microscope, and zeta potential analyses. The sensor, fabricated using VEA-imprinted poly(HMA-co-PA)/Nafion on screen-printed carbon electrodes, demonstrated a limit of quantification (LoQ) of 112.3 μg/mL (3.3× S/N) with a wide linear range extending to 3.0 mg/mL (10× S/N). While the sensor exhibited limitations in detecting VEA at concentrations below the LoQ, the integration of machine learning algorithms effectively mitigated these challenges. Machine learning models successfully classified the presence of VEA, even at subdetection limit concentrations, significantly enhancing the sensor’s analytical capabilities. Rigorous testing on real-world e-cigarette liquid samples yielded high recovery rates (96.83% ± 2.79–102.56% ± 3.84), validating the sensor’s accuracy and selectivity in complex matrices. This research not only establishes a promising platform for the rapid and sensitive detection of VEA in e-cigarette liquids but also underscores the transformative potential of integrating artificial intelligence with sensor technologies for addressing critical public health challenges.
In medical diagnostics, variations in hemoglobin levels can reveal a variety of prevalent health conditions. Abnormal hemoglobin is known to be connected with diseases like anemia, diabetes, hematemesis, hematuria, and hemoglobinuria. Consequently, there is a significant demand for advanced detection technologies and precise methodologies to accurately track and assess hemoglobin levels. This study demonstrates the potential of a novel molecularly imprinted nanoparticle‐based sensor system to rapidly analyze hemoglobin levels without the need for a laboratory environment. Hemoglobin imprinted‐poly(acrylamide‐co‐vinyl imidazole) [Hb‐imp‐p(AAm‐co‐VIM)] nanoparticles with high affinity and selectivity for hemoglobin were synthesized and loaded onto the surface of a screen‐printed carbon electrode (SPCE) with a nafion nanofilm. Nafion has selective ion exchange properties and allows for the enhancement of the electrochemical signal. An increase in signal was observed in the presence of 0.5% Nafion. The Hb‐imp‐p(AAm‐co‐VIM)/Nafion‐SPCE system was employed as the sensor surface for the detection of hemoglobin levels in blood. The Hb‐imp‐p(AAm‐co‐VIM)/Nafion‐SPCE system was characterized by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) measurements. The linear working range for hemoglobin was observed to be 0.73–15.54 μM (R2: 0.9934), with a calculated limit of detection (LoD) value of 0.24 μM (3.3 S/N). The sensor system exhibited high efficiency at the biological pH value of 7.4. Furthermore, percent recovery values for hemoglobin in blood samples were observed to be between 90.34% and 103.68%. To determine the selectivity of the Hb‐imp‐p(AAm‐co‐VIM)/Nafion‐SPCE electrode system, the current values of the system were investigated in the presence of ascorbic acid, cysteine, glucose, and IgG. The system exhibited high selectivity. Based on the data obtained, it is evident that the Hb‐imp‐p(AAm‐co‐VIM)/Nafion‐SPCE system can detect hemoglobin in biological environments and has the potential for use in disease monitoring systems.