1 March 2021 in Journal of Destination Marketing & Management
30 June 2020 in KSCE Journal of Civil Engineering
Loess is mostly distributed in an unsaturated state in nature, and the complexity of the engineering properties of unsaturated soil is mainly due to the existence of matric suction. Therefore, matric suction must be considered in investigating the mechanical properties of unsaturated loess. However, soils are most often subjected to three principal stresses with different magnitudes in practical engineering. For the sake of examining and discussing the mechanical behaviour of unsaturated natural loess under a complex stress path, a suction-controlled true triaxial apparatus with a rigid-flexible boundary is used to test unsaturated natural loess under a complicated stress path. Four trials of isotropic consolidation tests are conducted on natural loess under suction-controlled conditions via the true triaxial apparatus. The consolidation yield characteristics of the natural loess under different matric suctions are investigated. Forty-eight trials of consolidated drained true triaxial tests under suction-controlled conditions are conducted on unsaturated natural loess to examine and discuss the influence of the matric suction and intermediate principal stress parameter (b-value). The consolidated drained trials are performed under a constant net mean stress and a constant matric suction with different intermediate principal stress parameters (b-values). Stress-strain curves and failure envelopes of the natural loess are also presented. The results indicate that the stress-strain-strength response of unsaturated natural loess depends on the matric suction and intermediate principal stress parameter under true triaxial conditions.
21 August 2020 in Geotechnical Testing Journal
A new suction-controlled true triaxial apparatus was developed to investigate unsaturated soil behavior under multiaxial stress paths that are not readily achievable in a cylindrical cell. This apparatus is a mixed-boundary type device with a rigid-flexible-flexible boundary that can apply three principal stresses to a cubic specimen via two rigid platens along the vertical direction and four flexible hydraulic bags on the sides. The apparatus was modified based on a previous true triaxial apparatus designed at Xi’an University of Technology, with the addition of four division strips to avoid loading boundary interference. The new apparatus is capable of testing specimens with dimensions of 7 by 7 by 14 cm. The present apparatus was equipped with an independent pore-air pressure control system and pore-water pressure measurement system. Based on the axis-translation technique, a 5-bar high air entry value ceramic disk is seated on the pedestal, and a matric suction state was achieved that remains constant throughout the laboratory tests. Hence, this true triaxial apparatus can be used to conduct suction-controlled experiments. The suitability of this device was validated via two sets of three repeated trial tests and several sets of trial tests performed with remolded loess for different intermediate principal stress parameters under 50, 100, and 200 kPa matric suction values and different net mean pressure conditions. The results presented the stress-strain characteristics and failure loci of remolded loess.