25 May 2021 in Materials Advances
Despite the rapid increase in power conversion efficiency (PCE) of non-fullerene acceptor (NFA) based solar cells in recent years, organic photovoltaic (OPV) devices exhibit considerably larger voltage losses compared to their highly-efficient inorganic counterparts (e.g. Si or GaAs). Further material optimizations and strategies to reduce the voltage losses in OPV systems are required to close the gap to inorganic PV technologies and allow for efficiencies surpassing 20%. The main focus of this study is on understanding the voltage losses in high performance NFA-based solar cells, as furthering the knowledge in this area is critical in promoting their recent success. In this article, the open circuit voltage losses observed in high-performance D18:Y6 organic solar cells with a PCE of 16% are investigated in detail. The voltage losses of D18:Y6 devices are compared to fullerene-devices consisting of D18 and PC71BM in order to highlight the differences between non-fullerene and fullerene acceptors. A low open-circuit voltage loss of 0.51 V has been found for Y6-based devices suggesting a 0.29 V lower voltage loss compared to PC71BM-based devices (0.8 V). The observed differences can be explained by the high-lying charge transfer state energy in Y6-based solar cells and the strong emissivity of the pristine acceptor. Both properties seem to be prerequisites for efficient OPV systems with low voltage losses. Based on the experimental results, we suggest two design strategies to further improve the performance of OPV systems.
15 December 2021 in Journal of Materials Chemistry A
A perylene-based acceptor (PMI-FF-PMI), consisting of two perylene monoimide (PMI) units bridged with a dihydroindeno[1,2-b]fluorene molecule was developed as a potential non-fullerene acceptor (NFA) for organic solar cells (OSCs). The synthesized NFA was combined with the high-performance donor polymer D18 to fabricate efficient OSCs. With an effective bandgap of 2.02 eV, the D18:PMI-FF-PMI blend can be categorized as a wide-bandgap OSC and is an attractive candidate for application as a wide-bandgap sub-cell in all-organic triple-junction solar cell devices. Owing to their large effective bandgap, D18:PMI-FF-PMI solar cells are characterized by an extremely high open-circuit voltage (VOC) of 1.41 V, which to the best of our knowledge is the highest reported value for solution-processed OSCs so far. Despite the exceptionally high VOC of this blend, a comparatively large non-radiative voltage loss (ΔVnon-rad OC) of 0.25 V was derived from a detailed voltage loss analysis. Measurements of the electroluminescence quantum yield (ELQY) of the solar cell reveal high ELQY values of ∼0.1%, which contradicts the ELQY values derived from the non-radiative voltage loss (ΔVnon-rad OC = 0.25 V, ELQY = 0.0063%). This work should help to raise awareness that (especially for BHJ blends with small ΔHOMO or ΔLUMO offsets) the measured ELQY cannot be straightforwardly used to calculate the ΔVnon-rad OC. To avoid any misinterpretation of the non-radiative voltage losses, the presented ELQY discrepancies for the D18:PMI-FF-PMI system should encourage OPV researchers to primarily rely on the ΔVnon-rad OC values derived from the presented voltage loss analysis based on EQEPV and J–V measurements.
19 March 2022 in Chemistry – A European Journal
A series of non‐fullerene acceptors based on perylene monoimides coupled in the peri position through phenylene linkers were synthesized via Suzuki‐coupling reactions. Various substitution patterns were investigated using density functional theory (DFT) calculations in combination with experimental data to elucidate the geometry and their optical and electrochemical properties. Further investigations of the bulk properties with grazing incidence wide angle X‐ray scattering (GIWAXS) gave insight into the stacking behavior of the acceptor thin films. Electrochemical and morphological properties correlate with the photovoltaic performance of devices with the polymeric donor PBDB‐T and a maximum efficiency of 3.17 % was reached. The study gives detailed information about structure–property relationships of perylene‐linker‐perylene compounds.
29 July 2022 in Monatshefte für Chemie - Chemical Monthly
Perylene monoimide based electron acceptors have great properties for use in organic solar cells, like thermal stability, strong absorption, and simple synthesis. However, they typically exhibit low values for the dielectric permittivity. This hinders efficient exciton dissociation, limiting the achievable power conversion efficiencies. In this work, we present the synthesis and utilization of two new acceptor–donor-acceptor (A-D-A) molecules, comprising perylene monoimide as electron withdrawing A unit. Oligo ethylene glycol side chain modified carbazole (PMI-[C-OEG]) and fluorene (PMI-[F-OEG]) linkers were used as electron rich D units, respectively. The polar side chains are expected to increase the polarizability of the molecules and, thus, their permittivity according to the Clausius–Mossotti relationship. We found that the incorporation of glycol chains improved the dielectric properties of both materials in comparison to the reference compounds with alkyl chains. The permittivity increased by 18% from 3.17 to 3.75 for the carbazole-based non-fullerene acceptor PMI-[C-OEG] and by 12% from 3.10 to 3.47 for the fluorene-based acceptor PMI-[F-OEG]. The fabricated solar cells revealed power conversion efficiencies of 3.71 ± 0.20% (record 3.92%) with PMI-[C-OEG], and 1.21 ± 0.06% (record 1.51%) with PMI-[F-OEG]. Graphical abstract
16 March 2026 in Advanced Photonics Research
Lead halide perovskite nanocrystals (PNCs) are a highly promising class of materials for optoelectronic applications, due to their exceptional optical properties. Nevertheless, their poor stability has remained a major obstacle to practical implementation. This work reports highly stable lead halide PNCs of the compositions MAPbBr 3 and FAPbBr 3 (MA = methylammonium, FA = formamidinium). The nanocrystals are prepared via a facile, single‐step precipitation procedure using the amino acid derivative
N
α
‐( tert ‐butoxycarbonyl)‐L‐lysine (boc‐Lys) and hexanoic acid as ligands. Films of the precipitated nanocrystals exhibit near‐unity photoluminescence quantum yields and outstanding stability, maintaining their optical properties for more than 150 days (MAPbBr 3 ) and 490 days (FAPbBr 3 ) under ambient conditions, and for over 20 h under continuous blue light excitation. The excellent stability of the nanocrystals is attributed to an in situ formed encapsulating matrix, which initially consists of a complex formed between PbBr 2 and boc‐Lys. Furthermore, it is demonstrated that the isolated PbBr 2 /boc‐Lys matrix material can be used as precursor for growing highly luminescent, stable MAPbBr 3 nanocrystals through exposure to methylammonium bromide vapors. The presented nanocrystals are excellent candidates for light‐emission applications and could provide a blueprint for designing precursor materials for the growth of high‐quality, stable PNCs via metal halide‐amino acid complexes.