1 September 2019 in Journal of Manufacturing Processes
9 August 2022 in Journal of Manufacturing Systems
4 November 2018 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
The rapid development of additive manufacturing technology provides a more flexible and efficient manufacturing solution for the high value-added parts with a complex topology. However, the poor surface finish poses a major obstacle for the wide application of the additively manufactured components when their functionality and tolerance are benchmarked with those produced by the conventional process. In selective laser melting, visible pattern and texture of the printed layers and unmolten particles cannot be avoided although research works have been conducted to improve the surface finish by optimising the selective laser melting strategy and process parameters. Therefore, a dedicated post-processing technique is generally required to improve the surface finish of the additively manufactured products in terms of various levels of geometric complexity. In this study, a vibration-assisted conformal polishing tool is developed to finish a representative v-groove structure fabricated by selective laser melting. Experiments are conducted to investigate the effects of abrasive size and polishing time on the improvement in surface roughness. The developed technique in this paper can be applied to finish the additively manufactured internal structures such as honeycomb structure and irregular holes that have linear projection along a single axis.
11 April 2018 in Journal of Sandwich Structures & Materials
Flexible skin is an essential component for morphing wind turbine blade to maintain a smooth profile and bear aerodynamic loads during morphing. Cellular honeycomb cores with low in-plane and high out-of-plane stiffness are potential candidates for support structures of flexible skin. Honeycomb structure also requires zero Poisson’s ratio to avoid unnecessary stress and strain during one-dimensional morphing. A novel accordion cellular honeycomb core of close-to-zero Poisson’s ratio with in-plane corrugated U-type beams was proposed as a solution for these problems. The elastic properties of the structure are illustrated through a combination of theoretical analysis and finite element analysis. Results show that better in-plane morphing and out-of-plane load-bearing capabilities can be obtained with parameters of larger height-to-length ratio, spacing-to-length ratio and vertical beam to U-type beam thickness ratio as well as smaller thickness-to-length ratio. Results of comparisons on properties of the proposed honeycomb with two existing accordion honeycombs reveal that the in-plane elastic modulus of the proposed structure is as low as about 56% of that of the accordion honeycomb with V-type beams and 79% of that of the accordion honeycomb with cosine beams, showing better in-plane property but weaker out-of-plane load-bearing capability. Nevertheless, the out-of-plane load-bearing capability can be reinforced by increasing the vertical beam to U-type beam thickness ratio. Smaller driving force and less energy consumption are required by the proposed honeycomb core than conventional structures during morphing. The methods and results could be used for predictions of elasticity in design of sandwich morphing skin with similar cellular honeycomb cores.
22 September 2023 in IEEE Transactions on Industrial Informatics
Surface roughness is one of the determining factors for evaluating the quality of machined parts. However, the inevitable time-varying and uncertain characteristics in the actual machining process brings challenges to the construction of virtual metrology model. To address the problems of time-consuming training and low prediction accuracy in conventional virtual metrology models for surface roughness, a novel fuzzy echo state broad learning system (FESBLS) is proposed by introducing a reservoir with echo state properties to capture the dynamics of the machining process and then by employing incremental learning to reduce computational complexity and improve prediction accuracy. Besides, the effectiveness of the proposed method is validated by a grooving experiment and compared with benchmark approaches. Herein, the force signal collected during the grooving process and its fusion with cutting parameters are input into the FESBLS. The results show that the proposed FESBLS outperforms other models in improving the prediction performance. All in all, FESBLS is a promising technique for virtual metrology in machining processes.