26 June 2019 in IEEE Transactions on Nanotechnology
An effective scheme is proposed and investigated to improve the performance of thin film solar cells using a 2-D plasmonic grating structure at the rear electrode or back metal contact. The proposed light trapping scheme replaces the conventional flat rear electrode by a corrugated electrode with a square mesh of periodic grooves forming a 2-D plasmonic grating. The grating surface diffracts the light and increases the path for reflected light. Further, the energy of surface plasmons excited inside the grooves gets coupled to the absorber layer. An efficient light trapping scheme and surface plasmons resonance conjointly increase the absorption in the absorber layer of solar cell which results as enhanced efficiency. Maximum contribution of light path enhancement and surface plasmons is achieved by optimizing the periodicity, width, and depth of the grooves. The proposed design is compared with the conventional simple solar cell as well as with the solar cell having the rear electrode with 1-D plasmonic grating structure to demonstrate the effectiveness of the scheme. Finally, the optimized design is proposed which exhibits 92% absorption, 43% enhanced light path and more than 200% increase in the short circuit current as well as conversion efficiency.
2 January 2020 in Applied Physics A
25 October 2018 in Optical and Quantum Electronics
1 November 2018 in Superlattices and Microstructures
7 March 2024 in Optical Materials: X
An effective performance enhancement model for the thin film solar cell conjointly based on extraordinary transmission and nanoantenna is proposed and investigated. The absorber layer of the extraordinary transmission based solar cell contains a metallic thin film with periodic holes. Maximum extraordinary transmission is accomplished as the metallic film has the same refractive index on both sides. Increased light transmission causes the absorber layer to absorb more light, which increases short circuit current density and subsequently the efficiency of the thin film solar cell. The presented analysis demonstrates that adding a square nano patch on the top surface of the absorber layer can further boost the extraordinary transmission. The extraordinary transmission is increased because of the formation of cavity nanoantenna. Cavity nanoantenna increases the coupling of light into the hole due to the excitation of surface plasmons polaritons. The proposed design of solar cell exhibits around 98% absorption and the short circuit current density is increased by a factor of 3.23. The study has been carried out using finite difference time domain (FDTD) method.