Jie Tan

Jie Tan

Auto-generated profile, based on publicly available information

Jie Tan

Tianjin Branch of CNOOC Ltd

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 June 2021 in Journal of Petroleum Exploration and Production Technology
Verified
Journal Article
Open access
PDF file
JTJie Tan
Jie Tan
YLYing-Xian Liu
Ying-Xian Liu
YLYan-Lai Li
Yan-Lai Li
CLChun-Yan Liu
Chun-Yan Liu
SMSong-Ru Mou
Song-Ru Mou
X oilfield is a typical sandstone reservoir with big bottom water in the Bohai Sea. The viscosity of crude oil ranges from 30 to 425 cp. Single sand development with the horizontal well is adopted. At present, the water content is as high as 96%. The water cut of the production well is stable for a long time in the high water cut period. The recoverable reserves calculated by conventional methods have gradually increased, and even the partial recovery has exceeded the predicted recovery rate. This study carried out an oil displacement efficiency experiment under big water drive multiple to accurately understand an extensive bottom water reservoir's production law in an ultra-high water cut stage. It comprehensively used the scanning electron microscope date, casting thin section, oil displacement experiment, and production performance to analyze the change law of physical properties and relative permeability curve from the aspects of reservoir clay minerals, median particle size, pore distribution, and pore throat characteristics. Therefore, the development law of horizontal production wells in sandstone reservoirs with big bottom water is understood. It evaluates the ultimate recovery of sandstone reservoirs with big bottom water. It provides a fundamental theoretical basis and guidance for dynamic prediction and delicate potential tapping of sandstone reservoirs with big bottom water at a high water cut stage.

5 September 2021 in Journal of Petroleum Exploration and Production Technology
Verified
Journal Article
Open access
PDF file
YLYing-Xian Liu
Ying-Xian Liu
JTJie Tan
Jie Tan
HCHui Cai
Hui Cai
GWGong-Chang Wang
Gong-Chang Wang
SMSong-Ru Mou
Song-Ru Mou
The heavy oil reservoir is a special kind of oil and gas reservoir that differs from the conventional reservoir in many ways. Due to the high viscosity of crude oil, it is not easy to recover. When the viscosity of underground crude oil exceeds 150 cp, the land heavy oil field is generally developed by thermal recovery. S.Z. oilfield is a heavy oil reservoir in the Bohai Sea, with surface crude oil viscosity of 3000–25,000 cp and underground crude oil viscosity of 400–1000 cp. Limited by offshore equipment, the development strategy of land oilfields can't be directly applied. High production capacity is obtained through the cold production development of horizontal branch experimental wells, and the water drive production capacity can reach 40–70 m3/day. At present, there is a lack of research on cold recovery development under the viscosity of crude oil. The existing primary research and common knowledge are challenging to support efficient development technology for effectively producing heavy oil reservoirs. In this paper, through physical simulation experiments, the phase behavior and rheological properties of crude oil in the target block are studied, and the rheological properties of crude oil are clarified. Then, the depletion production and water flooding experiments are carried out, and the displacement characteristics and laws of water flooding cold production are analyzed. Finally, the indoor experiments of water flooding sweep efficiency and oil displacement efficiency in the target block are carried out. Clear its micro and macro spread. It provides technical support for the effective production of offshore heavy oil fields.

4 September 2021 in Journal of Petroleum Exploration and Production Technology
Verified
Journal Article
Open access
PDF file
YLYanlai Li
Yanlai Li
JTJie Tan
Jie Tan
SMSongru Mou
Songru Mou
CLChunyan Liu
Chunyan Liu
DYDongdong Yang
Dongdong Yang
For offshore reservoirs with a big bottom water range, the water cut rises quickly and soon enters the ultra-high water cut stage. After entering the ultra-high water cut stage, due to the influence of offshore production facilities, there are few potential tapping measures, so it is urgent to explore the feasibility study of artificial water injection development. The quasi-three-dimensional and two-dimensional displacement experiments are designed using the experimental similarity criteria according to the actual reservoir parameters. Several experimental schemes are designed, fluid physical properties, interlayer distribution, and development mode according to the actual reservoir physical properties. Through the visualization of experimental equipment, the bottom water reservoir is visually stimulated. The displacement and sweep law of natural water drive and artificial water injection in bottom water reservoir with or without an interlayer, different viscosity, and different well spacing is analyzed. The following conclusions are obtained: (1) For reservoirs with a viscosity of 150 cp. The recovery factor after water injection is slightly higher than before water injection. However, the recovery factor is lower than that without injection production. The reason is that the increment of injection conversion is limited to reduce one production well after injection conversion. (2) For reservoirs with a viscosity of 30 cp. The recovery factor after injection is 39.8%, which is slightly higher than 38.9% without injection. (3) For reservoirs with a viscosity of 150 cp. In the case of the interlayer. The recovery factor after injection is 30.7%, which is significantly higher than 24.8% without injection. (4) After the well spacing of the low-viscosity reservoir is reduced, the recovery factor reaches 46.1%, which is higher than 38.9% of the non-infill scheme. After the infill well in a low-viscosity reservoir is transferred to injection, the recovery factor is 45.6%, which has little change compared with non-injection, and most of the cumulative production fluid is water. The feasibility and effect of water flooding in a strong bottom water reservoir are demonstrated. This study provides the basis for the proposal of production well injection conversion and the adjustment of production parameters in the highest water cut stage of a big bottom water reservoir.

22 September 2021 in Journal of Petroleum Exploration and Production Technology
Verified
Journal Article
Open access
PDF file
JTJie Tan
Jie Tan
HCHui Cai
Hui Cai
YLYan-Lai Li
Yan-Lai Li
CLChun-Yan Liu
Chun-Yan Liu
FMFei-Fei Miao
Fei-Fei Miao
CLChun-Zhi Liu
Chun-Zhi Liu
The C oilfield is located in the Bohai Bay Basin, a typical strong bottom water reservoir. Oilfield reservoir and oil–water distribution are complex. At present, the C oilfield has entered the high water cut development stage, and it is challenging to stabilize oil and control water. The reservoir with an imperfect well pattern has dominant bottom water ridge channels, uneven oil–water interface uplift, limited water drive sweep range, and low inter-well reservoir production degree. The oil layer between the horizontal section of the production well and the top of the reservoir cannot be effectively developed, and the remaining oil is enriched. Therefore, it is urgent to explore new energy supplement methods to improve inter-well and vertical remaining oil production in the C oilfield. In this study, the displacement medium is optimized through indoor experimental simulation. From the experimental results, the remaining oil between the sand bodies can be used in heavy oil reservoirs, and the residual oil between wells can be significantly utilized in the alternate displacement of gas and foam, and the recovery degree of the reservoir is increased by 12.44%. The remaining oil at the top of the reservoir can be used in the upper reservoir to increase the remaining oil in the top of the reservoir by injecting gas and foam alternately in the new reservoir. The final recovery of the reservoir is increased by 6.00%. This experimental study guides tapping the potential of the remaining oil in the offshore strong bottom water reservoir.

21 July 2021 in Journal of Petroleum Exploration and Production Technology
Verified
Journal Article
Open access
PDF file
YLYing-Xian Liu
Ying-Xian Liu
JTJie Tan
Jie Tan
HCHui Cai
Hui Cai
YLYan-Lai Li
Yan-Lai Li
CLChunyan Liu
Chunyan Liu
The water flooding characteristic curve method is one of the essential techniques to predict recoverable reserves. However, the recoverable reserves indicated by the existing water flooding characteristic curves of low-amplitude reservoirs with strong bottom water increase gradually, and the current local recovery degree of some areas has exceeded the predicted recovery rate. The applicability of the existing water flooding characteristic curves in low-amplitude reservoirs with strong bottom water is lacking, which affects the accurate prediction of development performance. By analyzing the derivation process of the conventional water flooding characteristic curve method, this manuscript finds out the reasons for the poor applicability of the existing water flooding characteristic curve in low-amplitude reservoir with strong bottom water and corrects the existing water flooding characteristic curve according to the actual situation of the oilfield and obtains the improvement method of water flooding characteristic curve in low-amplitude reservoir with strong bottom water. After correction, the correlation coefficient between $$\frac{{k_{ro} }}{{k_{rw} }}$$ k ro k rw and $$S_{w}$$ S w is 95.92%. According to the comparison between the actual data and the calculated data, in 2021/3, the actual water cut is 97.29%, the water cut predicted by the formula is 97.27%, the actual cumulative oil production is 31.19 × 104t, and the predicted cumulative oil production is 31.31 × 104t. The predicted value is consistent with the actual value. It provides a more reliable method for predicting low-amplitude reservoirs' recoverable ability with strong bottom water and guides the oilfield's subsequent decision-making.