4 August 2022 in The European Physical Journal Plus
Due to the advancement of proton therapy for cancer treatment, there has been a worldwide increase in the construction of treatment facilities. Therapy centres are often coupled with clinical, biological or material-science research programs. Research activities require proton beams at energies spanning an extensive range with higher beam currents and longer irradiation times than clinical conditions. Additionally, next-generation proton therapy systems are evolving towards more compact designs. In addition to the increased centres’ workloads, reducing the system in size produces a more significant number of secondary particles per unit volume and time. Therefore, the activation level of materials constituting those future proton therapy centres is expected to be higher, increasing the ambient dose and the amount of radioactive waste collected at the end of a centre’s lifetime. These operating conditions pose new challenges for the shielding design and the reduction of the concrete activation. To tackle them, we propose a novel approach to seamlessly simulate all the processes relevant for the evaluation of the concrete shielding activation using, as an illustration, the Ion Beam Applications Proteus $$^\circledR $$ One system. A realistic model of the system is developed using Beam Delivery Simulation (BDSIM), a Geant4-based particle tracking code. It allows a single model to simulate primary and secondary particle tracking in the beamline, its surroundings, and all particle-matter interactions. The code system and library database FISPACT-II allows the computation of the shielding activation by solving the rate equations using ENDF-compliant group library data for nuclear reactions, particle-induced or spontaneous fission yields, and radioactive decay. As input, FISPACT-II is provided with the secondary particle fluences scored using the BDSIM Monte Carlo simulations. This approach is applied to the proton therapy research centre of Charleroi, Belgium. Results compare the evolution of the clearance level and the long-lived nuclide concentrations throughout the facility lifetime when using regular concrete or the newly developed Low Activation Concrete (LAC). A comparison with the initial shielding dimensioning has been performed for all the shielding walls to validate the methodology and highlight the clear benefits of integrating LAC inserts in the shielding design. The effectiveness of coupling BDSIM and FISPACT-II gives a glimpse of the possibility of a complete activation study following the actual workloads of the centre, allowing a better assessment of the shielding activation level at any time of the facility lifespan.
5 October 2022 in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
21 November 2022 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
11 February 2022 in Physical Review Research
The treatment protocols of cancerous ocular diseases with proton therapy are well established, and dedicated eye-treatment systems can produce the clinical beam properties that meet the peculiar features required by eye-treatment modalities. However, for general-purpose multiroom systems comprising eye-treatment beamlines and nozzles, the design and commissioning procedures must be optimized to achieve the performances of fully dedicated systems in terms of depth-dose distal falloff, lateral penumbra, and dose rate. This paper presents a realistic start-to-end beam transport and particle-matter interactions model of the ion beam applications Proteus® Plus single-scattering eye-treatment room with Beam Delivery SIMulation (bdsim) using Geant4. The model is used to establish optimization patterns in terms of beam optics to achieve a smaller depth-dose distal falloff than the design baseline while maintaining a nominal dose rate and lateral flatness of the dose deposition profile. An alternative design is proposed to increase the dose rate further by up to a factor 3, allowing for delivering a complete hypofractionated treatment session under 60 s. It uses a beam-stopping device to complement the existing scattering features of the nozzle. An in-depth study of the system is performed using bdsim and the numerical simulations are discussed in detail.
15 February 2024 in Physical Review Accelerators and Beams
Vertical fixed-field accelerators (vFFAs) feature a magnetic field that increases exponentially in the vertical direction, resulting in vertically stacked nonplanar orbits. Their magnetic field is highly nonlinear, and their solenoid and quadrupolar components induce strongly coupled optics. The detailed study of their beam dynamics must account for the transverse motion linear and nonlinear coupling. Specifically, the study of linear beam dynamics requires adequate coupling parametrizations, and the study of nonlinear beam dynamics, including the characterization of the dynamic aperture (DA), must be performed in the full 4D phase space. The ray-tracing code is ideally suited to study the vFFA transverse dynamics, as it can perform step-by-step particle tracking in vFFA complex geometry and magnetic fields. This paper provides an in-depth study of the vFFA prototype ring designed under the ISIS-II proton driver prototype project to accelerate proton beams from 3 to 12 MeV. The magnets of this vFFA ring exhibit slow magnetic field falloffs, resulting in a significant influence of the neighboring cells on the optical lattice parameters. The determination of stable orbits and tunes requires superimposing 3D magnetic field maps in to account for the neighboring cell residual fields. The study of nonlinear beam dynamics revealed the appearance of fourth-order stability islands. A complete characterization of the DA in the 4D phase space was conducted to give a measure of the stability domain and characterize the performance and limitations of this lattice. This study paves the way for further validation studies with experimental data and field maps. Published by the American Physical Society 2024