Photothermal neural stimulation enables optical excitation or inhibition of neural activity depending on the dynamics of localized temperature changes, offering high spatial resolution without genetic modification. However, quantitative analysis of these temperature dynamics remains limited due to the lack of suitable direct sensing technologies, posing a challenge to the safe and controlled application of photothermal neural stimulation techniques. This challenge is addressed by developing transparent thermoelectric temperature sensor arrays with high spatiotemporal resolution, integrated with electrical and optical recording capabilities. These microscale sensors stably and accurately capture rapid temperature increases and decreases, and thermal equilibrium induced by thermo‐plasmonic effects at the neural interface, regardless of the environment. The multifunctional platform allows simultaneous electrical and optical monitoring of neural responses during the photothermal stimulation, enabling detailed analysis of the correlation between localized temperature changes and neural activities. a reversible neural inhibition window (1.4–4.5 °C) and thresholds for irreversible damage (>6.1 °C) are identifyed. Using high temporal‐resolution sensing, localized thermo‐plasmonic temperature dynamics over tens of milliseconds, and associated neural signal suppression and reactivation are captured. This approach provides unprecedented insight into the interplay between photothermal effects and neural activity, establishing a foundation for precise, temperature‐guided neuromodulation therapies and advanced neural circuit research.
Microelectrode arrays (MEAs) are useful biointerfaces for analyzing the functional characteristics of neural networks. Recently, with the increasing interest in the 3D neuronal network in vitro, 3D MEAs have been actively developed. However, because conventional 3D MEAs are fabricated based on conventional planar microfabrication process used in the semiconductor industry, there are limitations in geometry freedom for constructing complex 3D structures, and customization for the various structures and sizes of 3D neuronal network models. In this study, a novel 3D MEA fabrication platform addressing these limitations is proposed. The key concept for fabricating microelectrodes in a 3D space is to automatically fill a hollow 3D insulator printed by a 3D printer with an electrically conductive ink using capillary action. This allowed free arrangement of microelectrodes in 3D space, and it is possible to engineer a 3D neuronal network in vitro in the desired form using a scaffold‐type 3D MEA. Furthermore, it is experimentally demonstrated that one can induce functional activity patterns in structurally designed 3D neuronal networks. The functional activity can be analyzed precisely in 3D space with high temporal resolution. It is expected that this platform will further advance the understanding of the physiological characteristics of engineered 3D neuronal networks.
Three-dimensional (3D) microelectrode arrays (MEAs) have been actively developed to enable electrophysiological recording from in vitro 3D neuronal network models, which have attracted considerable research interest in recent years. These devices overcome the fundamental limitation of conventional planar MEAs, in which microelectrodes are confined to a single plane, by distributing microelectrodes throughout 3D space. This enables direct access to neurons throughout the tissue, allowing precise analysis of neural activity in 3D space across the neuronal network. Depending on the strategy used to position microelectrodes in 3D space, current 3D MEAs have been developed in a variety of structural configurations, including probe-, tip-, planar mesh-, 3D mesh-, curved surface-, stretchable mesh-, and wrapping-architectures. These structurally diverse devices have primarily been fabricated using photolithography-based microfabrication processes, while more recently, 3D printing technology has been adopted to improve structural design freedom for complex 3D structures. In this review, we discuss the structural diversity and fabrication strategies of 3D MEAs for in vitro 3D neuronal network models, examine recent advances and current limitations, and outline future directions for the field.