14 August 2019 in Polymer Engineering & Science
19 March 2020 in Welding in the World
2 January 2020 in Journal of The Institution of Engineers (India): Series C
1 February 2021 in Polymer Testing
1 January 2024 in High Temperature Materials and Processes
Plasma arc cutting (PAC) has emerged as a versatile and efficient method for the precision cutting of various materials, including commercial-grade aluminium plates. The optimization of process parameters is crucial for achieving high-quality cuts, minimizing material wastage, and enhancing overall productivity. This study aims to systematically investigate and optimize the key process parameters in PAC of commercial-grade aluminium plates. The experimental design involves the manipulation of parameters such as arc current, gas pressure, and workpiece thickness. A Design of Experiments approach, specifically Taguchi’s orthogonal array, is employed to efficiently explore the parameter space and identify the optimal combination of settings. The response variables considered for optimization include minimum surface roughness, minimum burr height, and maximum material removal rate (MRR). Analysis of variance is performed to get the percentage influence of each process parameter on the performance characteristic. The results obtained from the optimization process are expected to provide valuable insights into enhancing the efficiency and precision of PAC for commercial-grade aluminium plates. Arc current is found to be the most significant parameter in altering the surface roughness. The thickness of the material is the most significant parameter in altering burr height. None of the parameters is found to be significant in altering the MRR from Analysis of Variance analysis. From signal-to-noise ratio analysis and average performance graph, the optimum combination of processes in altering the bur height and MRR are found as arc current at 50 amp, the gas pressure at 5.4 bar, and the thickness of the workpiece at 6 mm.
1 July 2025 in Materials Research Express
The aim of this study is to evaluate the influence of reinforcing powdered bamboo filler (PBF) on the mechanical and fatigue properties of epoxy-based polymer composites, with a focus on balancing void content and tensile strength. Epoxy composites were fabricated by incorporating varying content of PBF (2.5%, 5%, 7.5%, 10%, and 12.5% by weight) using casting process, at room temperature (32 °C–34 °C) for 24–48 h. The prepared samples were subjected to mechanical testing (tensile strength), fatigue analysis, void content evaluation, and microstructural examination to assess the effects of filler concentration. The specimen with 12.5% PBF exhibited the highest void content (7.75%), while the neat epoxy sample showed the lowest (3.24%). An increasing trend in tensile strength was observed with higher PBF content, peaking at 24.172 MPa for the 12.5% PBF composite. Fatigue resistance improved with filler content; notably, the composite with 10% PBF endured over 106 fatigue cycles. Microstructural analysis revealed noticeable agglomeration of PBF particles in samples with filler content above 10%. The results suggest that incorporating powdered bamboo filler into epoxy composites can significantly enhance mechanical and fatigue properties, particularly up to a 10% filler concentration. However, excessive filler loading (beyond 10%) may lead to particle agglomeration and increased void content, which could negatively impact performance. These findings provide valuable insights for optimizing natural filler content in sustainable composite material design. The noted enhancements in tensile strength and fatigue life indicate that these composites may be appropriate for lightweight structural applications, especially in non-load-bearing scenarios.