28 June 2022 in CEAS Space Journal
RETALT (RETro propulsion Assisted Landing Technologies) is a project funded in the frame of the European Union Horizon 2020 program, that is studying critical key technologies for the vertical landing of launcher configurations with the aid of retro propulsion. In particular Aerodynamics, Aerothermodynamics, Flight Dynamics and Guidance Navigation and Control (GNC), Structures, Mechanisms, Thrust Vector Control and Thermal Protection Systems are investigated in detail in the project. This paper provides an overview of the technological achievements in these different technological areas, with emphasis on the interaction between them. Design changes made to the RETALT1 configuration are laid out in detail. The novel approach of using interstage segments as aerodynamic control surfaces proved to be challenging from the aerodynamics, flight dynamics, mechanical and structural points of view. For this reason, planar fins were introduced as aerodynamic control surfaces in the new base line configuration for RETALT1. The paper concludes with a summary of future steps to be made in the RETALT project to reach the targeted Technology Readiness Level (TRL) of the different key technologies.
21 February 2022 in CEAS Space Journal
In the RETALT (RETro propulsion Assisted Landing Technologies) project vertical landing launcher configurations are investigated. In the aerodynamic phase of retro propulsion assisted descent and landing, the main devices for control and trim of the vehicle are the aerodynamic control surfaces. In this paper, experimental data of a novel concept where the interstage is divided in four segments which are used as aerodynamic control surface during the aerodynamic descent of the first stage is presented. The results are compared to theoretical results obtained using a simplified modelling of supersonic and hypersonic flow fields. The interstage segments show to be very effective in creating drag for aerodynamic deceleration in the atmosphere. A large deflection of the interstage segments can lead to largely unsteady flows. The deflection of only one interstage segment does not yield statically stable configurations.
29 June 2022 in CEAS Space Journal
In the frame of the RETALT (RETro propulsion Assisted Landing Technologies) project, the aerodynamics of reusable launch vehicles reentering the atmosphere and descending and landing with the aid of retro propulsion are studied. In particular, series of wind tunnel tests are performed to assess the aerodynamic properties of such a vehicle in the various flight phases from hypersonic and supersonic re-entry down to subsonic conditions at touch down. This paper discusses the results of wind tunnel tests in the Hypersonic Wind Tunnel Cologne (H2K) at the Supersonic and Hypersonic Flow Technologies Department of the German Aerospace Center (DLR) in Cologne for the hypersonic retro propulsion maneuver during the re-entry burn. Mach numbers of 5.3 and 7.0 were tested with a variation of thrust coefficient, Reynolds number, angle of attack, cold and heated air. A single-engine configuration and a configuration with three active engines were tested. In all tests, the engine exhaust was simulated using ambient temperature or heated air. Dependencies of the flow features of the square root of the thrust coefficient known from literature for the single-engine case can be confirmed and extended to the three-engine configuration. For the single-engine case, the formation of vortex rings was observed, which eventually leads to strong individual vortices and extensive flow field disturbances. The heating of the supply air up to 600 K mitigates condensation in the retro plume, while the overall flow structures remained unchanged. High thrust coefficients generally lead to vanishing pressure coefficients on the engine bay. The single and the three-engine cases are comparable in this sense. The Mach number and Reynolds number are of subordinate importance for the pressures on the vehicle, while the thrust coefficient is the dominating similarity parameter. Pressure coefficients far downstream of the retro plume are affected less and, therefore, are not negligible at non-zero angles of attack. In this paper, the methodology of the wind tunnel tests and the results obtained are described in detail.
18 July 2024 in Experiments in Fluids
In the frame of the European funded H2020 project RETALT (retro propulsion-assisted landing technologies), the unsteady aerodynamics of vertically descending and landing launchers have been investigated. In this paper, experimental data of the landing burn tested in the Vertical Free-Jet Facility Cologne at DLR in Cologne are presented. The landing burn was simulated with a cold gas jet of pressurized air opposing the wind tunnel free stream. Tests with several jet conditions were compared to results without active jet. Proper orthogonal decomposition of schlieren recordings and spectral analyses of their time histories are performed and are compared to frequencies in pressure measurements. Dominant frequencies were found, which are strongest at Mach 0.8. Especially, a Strouhal number of 0.2 was found to be most dominant. The intensity of the dominant frequencies can be lowered if the engine is active. The normalized root mean square pressure fluctuations are between 0.1 and 0.3 during the landing maneuver. Additionally, the steady flow features scale well with the ambient pressure ratio and the momentum flux ratio. The unsteady flow field dynamics of the subsonic retro propulsion flow field can likely be linked to large-scale turbulent structures in the supersonic jet, triggering large-scale pressure fluctuations and altering the overall flow field.
1 May 2025 in Journal of Spacecraft and Rockets
One of the very first tasks in launch vehicle design is the preliminary sizing. It is necessary for further design choices, but it should deliver a precise estimate of the launch vehicle’s mass and geometry as possible. Orbital launch vehicles can be either expendable or partially/fully reusable and can assume various stage configurations. Finding an optimal solution under practical constraints is a challenging task, which gives a wide design space for potential future launch vehicles. Hence, a generalized mathematical model of a launch vehicle design has been developed and implemented as a versatile and easily modifiable programming tool for fast and parametric system characterization and optimization. The model uses several basic parameters useful in describing launch vehicles and introduces some new parameters to account for reusability. Analytical and semi-empirical correlations are used to determine the overall system and mission performance of a launch vehicle for a given reference mission, including mass and geometry, and calculate the optimal launcher staging. The implementation of the model also allows coupling with other tools, which forms a design chain with respect to aerodynamics and trajectory simulation. With this design chain, several launch vehicles have been modeled and validated, proving the applicability of the method.
11 October 2023 in Research Square
In the frame of the European funded H2020 project RETALT (Retro Propulsion Assisted Landing Technologies) the unsteady aerodynamics of vertically descending and landing launchers have been investigated. In this paper experimental data of the landing burn tested in the Vertical Free-Jet Facility Cologne (VMK) at DLR in Cologne is presented. The landing burn was simulated with a cold gas jet of pressurized air opposing the wind tunnel free stream. Tests with several jet conditions were compared to results without active jet. Proper Orthogonal Decomposition of Schlieren recordings and spectral analyses of their time histories are performed and are compared to frequencies in pressure measurements. Dominant frequencies were found, which are strongest at Mach 0.8. Especially a Strouhal number of 0.2 was found to be most dominant. The intensity of the dominant frequencies, can be lowered if the engine is active. The normalized root mean square pressure fluctuations are between 0.1 and 0.3 during the landing maneuver. Additionally, the steady flow features scale well with the ambient pressure ratio and the momentum flux ratio.