3 March 2025 in IEEE Transactions on Industrial Informatics
This article explores a novel variable-gain super-twisting observer (VGSTO)-based fixed-time sliding mode control (FTSMC) method for the dc-link voltage control of three-level neutral-point-clamped (NPC) active front-end (AFE) converters. Among the literature review, the super-twisting observer is an attractive solution for disturbance estimation. However, its convergence velocity is limited when the trajectories are far away from the origin. To overcome this drawback, a novel VGSTO is proposed in this work, whose innovation lies in adopting dynamically adapted exponent coefficients in the conventional super-twisting observer; thus, it turns into a linear observer outside a ball around the origin, which increases the convergence rate of conventional super-twisting observer, and the disturbance rejection ability is enhanced significantly. In addition, an FTSMC is designed for the NPC converter and its settling time is independent of the initial states, which breaks through the limitation of the traditional finite-time sliding mode controllers and assures the dynamic performance of the NPC converter. The proposed control scheme is assessed and compared with other representative observer-based sliding mode control methods based on a three-level NPC AFE converter test bench, and the experimental results verify its feasibility and effectiveness.
25 October 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
In this paper, a generalized proportional integral observer (GPIO)-based finite-time sliding mode control scheme is proposed to enhance the convergence rate and disturbance rejection capacity of the grid-connected three-level neutral-point-clamped (NPC) converter. Firstly, a generalized super-twisting algorithm (GSTA) is designed in the voltage regulation loop and the instantaneous power loop of the NPC converter. Compared with the conventional super-twisting algorithm (STA), this method provides a faster convergence speed while the system trajectories are far from the origin, which is applied to the NPC converter to improve its dynamic performance and robustness. Additionally, by introducing a generalized proportional integral observer (GPIO) combined with the GSTA in the voltage regulation loop, the unknown time-varying disturbances can be rejected effectively. The stability of the proposed control scheme is proved. Finally, a set of comparative experiments between the proposed controller and the classic STA-based method have been carried out based on a three-level NPC converter prototype, and the results confirmed the efficacy of the proposed control strategy.
1 December 2025 in IEEE Transactions on Power Electronics
In this article, a novel disturbance observer-based sliding mode control scheme with fixed-time convergence mechanism is proposed to regulate the output voltage of dc–dc buck converters. First, to assure that the convergence time of the voltage tracking process is independent of the initial state, a new varying exponential coefficient fixed-time sliding mode controller (VECFxTSMC) is proposed in the outer loop of dc–dc buck converters. The designed varying exponential coefficient $\sigma$ increases when the system trajectory is distant from the origin to improve the convergence speed and decreases when the system trajectory is near the origin to assure the robustness. Compared with conventional fixed-time sliding mode controllers, the proposed one not only assures a fixed-time convergence of system trajectory but also further enhances the robustness and dynamic performance of the system without increasing chattering, thus the performance of buck converters can be further enhanced. Then, a fixed-time disturbance observer is designed in combination with the proposed VECFxTSMC to estimate the unknown lumped disturbances and enhance the disturbance rejection ability of buck converters. Finally, a set of comparative experiments between conventional methods and the proposed method are implemented based on dc–dc buck converters, and the experimental results verify the effectiveness and superiority of the proposed strategy.