13 October 2016 in IEEE Transactions on Antennas and Propagation
Starting from measurements performed at 1140 MHz in an urban environment (Rio de Janeiro, Brazil), the signal strength measured is compared with the usual predictions calculated using the methods of International Telecommunication Union-Radiocommunication (ITU-R) Rec. 526-11/Cascade Knife Edge, and ITU-R Rec. 526-12/Delta-Bullington. The first model presented better adjustment to the data and, by using artificial neural networks (ANNs), this paper deals with the signal coverage prediction in a mobile channel calculated by the ITU-R model, which is used to train the ANN in order to reduce the average deviations. This hybrid application (ITU-R/ANN) showed efficiency, resulting in higher accuracy for the signal strength prediction, and an average improvement of 8 dB was achieved.
16 December 2022 in IEEE Transactions on Broadcasting
ASAmanda Beatriz Dos Santos
Amanda Beatriz Dos Santos
PCPedro V. Gonzalez Castellanos
Pedro V. Gonzalez Castellanos
+2
The next-generation TV broadcasting systems must meet the demand for better audio and video quality, higher accessibility and interactivity, and personalized services on fixed and mobile devices. In Brazil, field measurement tests are being performed to evaluate the performance of candidate technologies. The Advanced ISDB-T is a promising Japan Broadcasting Corporation (NHK) technology. It evolves from the current ISDB-T standard, already adopted in Brazil, increasing the system’s flexibility, robustness, and spectrum efficiency. It also includes MIMO technologies to allow for high transmission rates. This work assesses the Advanced ISDB-T system performance in field tests, considering a 2x2 MIMO transmission through a Rayleigh channel, considering the requirements defined for the next generation of Brazilian Digital TV systems. We evaluate the channel power, threshold C/N ratio, and reception threshold on 20 measurement sites with outdoor reception. The measurements of the parameter Condition Number, which quantifies the suitability of the radio channel for MIMO transmission, indicate that the channel was well-conditioned at all measurement sites but one and that the tested system efficiently demodulated the MIMO received signal, even under less unfavorable conditions. This occurs when the C/N threshold is less than zero and the corresponding condition number is equal to or less than 2 dB.
13 June 2023 in IEEE Transactions on Broadcasting
This article analyses low-density parity-check (LDPC) codes for forward error correction (FEC) in the next generation of digital terrestrial broadcasting systems for transmitting high-volume content services, such as ultra high definition television (UHDTV). We assess the performance of the LDPC codes used by the Advanced ISDB-T system with 2x2 MIMO transmission using experimental data obtained in field measurements in Brazil. Channel power, carrier-to-noise threshold, and receiving threshold were measured for four different low-rates LDPC codes, two modulation types, and three receiving antenna heights at outdoor sites in urban areas. The coverage analysis shows that the channel power presents a similar distribution for horizontal and vertical polarized signals. C/N threshold analysis shows that in sites with high vehicular traffic, the C/N threshold and reception threshold values were much higher than in other sites with less heavy vehicular traffic. Among the five coding-modulation combinations used in the field tests, the transmission configuration with LDPC code rate 2/16 and QPSK modulation was the one that presented the best results partially meeting the requirement of C/N $\leq $ 0dB. The transmission configuration with LDPC code rate 3/16 and QPSK modulation showed C/N results just above 0dB, but offering 50% higher data transmission rate.
1 January 2024 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
In this paper, the application of AI and machine learning (ML) to the study of wireless propagation channels is investigated in two parts: first, an artificial neural network model is used to improve path loss prediction, and then, a pattern recognition model using multilayer perceptron (MLP) networks is used to identify and remove impulsive noise in power delay profiles (PDP). These studies were conducted based on field measurements in the 2400 MHz band in a public square with vegetation. The results are analyzed and compared with ordinary least squares (OLS) nonlinear regression results and results from similar studies. The Root Mean Square Error (RMSE) values between the experimental results of mean path loss and those provided by each propagation model are presented. The adjustment performed by OLS nonlinear regression and ANN significantly reduced the RMSE. The best results are those presented by artificial neural networks, with RMSE of 0.39 when using four neurons in the hidden layer of the ANN. The ANN used to identify and remove impulsive noise in power delay profiles (PDP) through pattern recognition proved to be more efficient than the CFAR technique. ANN technique found a larger number of valid multipaths compared to the CFAR technique.
1 March 2020 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
This paper presents a microstrip phased array using High Impedance Surface-Electromagnetic Bandgap (HIS-EBG) in order to minimize the effects of mutual coupling among the antenna elements. Each element of the array is fed by a coaxial cable allowing the beam steering by controlling the signal of the input port of each element. This phased array operates at X Band as well as the bandgap of the HIS-EBG structure. Its main applications are satellite communication and broadcasting systems. Results show reductions in the mutual coupling up to 12 dB, and improvements in the return loss and gain.
1 April 2017 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
This paper deals with the effect of the Single-Input Multiple-Output spatial diversity on the OFDM mobile radio signal propagating in an urban channel. From measurements performed in Rio de Janeiro city, Brazil, by using two receiving antennas at diversity, the calculated capacity presented an improvement when compared to the individual one.