1 November 2019 in IOP Conference Series: Materials Science and Engineering
The technology, Long Term Evolution (LTE) developed by 3rd Generation Partnership Project is considered an improved standard in mobile communications when compared to previously attained network standards. LTE with prospects of decreased latency levels and support of downlink and uplink transmission at data rates exceeding 100Mbps and 50Mbps, an effective handover framework needs to be put in place to improve quality of service rendered to the network users and decrease wastage of network resources. This study examines several works carried out on a handover criteria (hysteresis margin) needed for designing an effective handover framework. This margin is based on the received signal strength between both target and serving eNodeBs, and its proper determination amongst other advantages mitigates the rate of unnecessary and repeated handover (ping-pong effect). The model presented in this research integrates the artificial neural network (ANN) mechanism into the determination of hysteresis margin in the LTE handover process which is to minimize handover delay and ping-pong taking into consideration the speed of the user equipment (UE).
1 January 2017 in International Journal of Advanced Engineering, Management and Science
Open Access monthly international Journal to publish research papers Engineering, Management and Science
1 October 2018 in Data in Brief
Accurate energy metering and billing is a challenge in some developing countries. In Nigeria, the issues of inadequate power generation, transmission and distribution infrastructure are recurrent problems, coupled with inefficient energy metering which is a major problem that results in residential energy consumers being billed unfair energy charges by the Electricity Distribution Companies (DISCOs) for unused energy, and this has been termed "crazy bill". For the energy sector to be effective, energy bills should be based on the actual energy usage and likewise customers must pay for used energy. To achieve this, the Nigerian Electricity Regulatory Commission (NERC) recommended the installation of prepaid meters for all customers, but as at today, there is no full compliance with this regulation. Power supply is grossly unreliable, and this has affected power quality due to frequent load shedding and power outages. The dataset presented in this article captures the type of apartment, the type of electrical appliances used by occupant, the average monthly energy bill paid for electricity, the use or non-use of alternative energy sources, the type of alternative energy sources used, and the type of energy meter used by sampled residents of the Ota community in Ogun State, Nigeria. The dataset was acquired using an investigative questionnaire to survey the residential consumers within the sampled space.
31 March 2026 in IEEE Wireless Communications Letters
Highly directional mmWave/THz links require rapid beam alignment, but exhaustive codebook sweeps impose prohibitive training overhead. This letter proposes a sensing-assisted adaptive probing policy that maps multimodal sensing (radar/LiDAR/camera) to a calibrated prior over beams, predicts per-beam reward with a deep Q-ensemble whose disagreement serves as a practical epistemic-uncertainty proxy, and selects a small probe set using a Prior-Q upper-confidence score. The probing budget is adapted from prior entropy, explicitly coupling sensing confidence to beam-training overhead, where E[Kt] denotes the average number of probed beams per sweep. A margin-based safety rule prevents low-SNR locks: outages are defined by an SNR threshold θ, and the shield uses a robustness margin Δ dB above this boundary. Experiments on DeepSense-6G (train: scenarios 42 and 44; test: 43) with a 21-beam DFT codebook achieve Top-1/Top-3 of 0.81/0.99 with E[Kt] ≈ 2 and zero observed outages at θ = 0 dB with Δ = 3 dB.
1 November 2019 in IOP Conference Series: Materials Science and Engineering
This work investigates natural light levels inside a room in Electrical & Information Engineering building, Covenant University, Ota, Ogun State, Nigeria. In order to reduce the amount of energy used on lighting, it is imperative to make the utmost use of natural daylight. The use of windows are one traditional solution, other solutions are skylights and light pipes; atria and light wells; domes and arches; structural glass which are all discussed. In high temperature regions, it is necessary to reduce the amount of sunlight entering the room because light produces heat. With the use of a Light Dependent Resistor (LDR sensor), results are presented to study the day light levels in a room by measuring the light levels at various parts of the room; by measuring the proportion of light entering through the window and measuring how the light level changes over a 24 hour period. The outcome of this work is the study and development of a system that can monitor light levels in a building. The application of this work extends to determining the period of the day when daylight is maximal in order to reduce energy cost, building an automation system for the automatic lighting of dark areas within a building as well as monitoring energy consumption used to light p a building. Further extension will be to make predictions on the natural light level based on the data available.