We carry out comparative studies of the phase composition, morphology, and hardness of semiconductor legs based on the n-type solid solution Bi2Te3−Bi2Se3, obtained by hot pressing, after...
We have studied phase transformations of a 20-μm-thick rolled foil of the Pd–57 at % Cu solid solution in a heating–cooling cycle. The as-prepared foil was two-phase, with a nanocrystalline structure. The mutual orientation of the α- and β-phases corresponded to the Nishiyama–Wassermann orientation relationship. Using X-ray diffraction and resistivity measurements, the β ⇆ α phase transformations were shown to be reversible. The effect of the severely deformed initial structure shows up as a shift in the onset temperature and end point of the α → β phase transformation.
The structural and phase changes induced by heat treatment (HT) and brief lamp processing (LP) in 70- and 1500-nm-thick Li–Nb–O films similar in elemental composition to LiNbO3, grown on the surface of unheated substrates (monocrystalline Si wafer and NaCl single crystal) by rf magnetron sputtering and ion-beam sputtering of a LiNbO3 target have been studied by reflection high-energy electron diffraction and X‑ray diffraction. The as-grown films were extremely nanostructured and consisted of crystalline lithium oxides, niobium oxides, and LiNbO3 as the product of reaction between them. We have demonstrated the conceptual feasibility of driving the synthesis of polycrystalline LiNbO3 films to completion using HT or brief LP. In the case of LP, LiNbO3 synthesis is three orders of magnitude faster than in the case of HT.
Lead telluride films have been grown on Si (100) and BaF2(100) substrates by a modified hot-wall method using a graphite reaction chamber. According to X-ray diffraction, X-ray microanalysis, and...
The paper demonstrates a simple way to control the filling degree of the pores of a silicon oxide template on silicon substrate with nickel. SiO2/Si template was formed using the swift heavy ion tracks technology, which includes irradiation with high energy ions and chemical transformation of the obtained latent tracks into the pores. The preparation of SiO2(Ni)/Si nanostructures with different filling degree of pores in SiO2 with nickel was performed using the electrodeposition method by changing the duration of the process. A study and analysis of the morphology of SiO2(Ni)/Si nanostructures using scanning electron and atomic force microscopy was carried out to determine the nature of pore filling by metal
Cross sections obtained by the method of a focused ion beam and fractures of the PdCu/AlO nanocomposite synthesized by magnetron sputtering (MS) of alloy-type target PdCu and condensation in vacuum on the surface of nanoporous AlO produced by anodic oxidation of aluminum foil are investigated using the methods of high-resolution scanning electron microscopy implemented on the basis of a Helios 600i setup (FEI, United States). Regularities of the formation of the structure and morphology of crystallites of vacuum condensate of Pd–Cu solid solution with a thickness of 0.1–4 μm on a surface with open porosity are disclosed. Approaches to the formation of the gradient structures near a free surface are discussed, and the conditions of the initiation of MS mechanisms of the formation of discrete, porous, and anisotropic condensates are found. Approaches to nonselective filling of nanopores in a dielectric by metal clusters and forming of the gradient structure of the nanocomposite PdCu/AlO are carried out.