Birk Berger

Birk Berger

Auto-generated profile, based on publicly available information

Birk Berger

Electrodynamics and Physical Electronics Group, Cottbus, GERMANY

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2019 in Plasma Sources Science and Technology
Verified
Journal Article
Closed access
PDF file
MDManaswi Daksha
Manaswi Daksha
ADAranka Derzsi
Aranka Derzsi
ZMZaka-Ul-Islam Mujahid
Zaka-Ul-Islam Mujahid
DSDavid Schulenberg
David Schulenberg
BBBirk Berger
Birk Berger
JSJulian Schulze
Julian Schulze
The ion-induced secondary electron emission coefficient ( γ ) is a vital parameter in the modeling of low temperature RF plasmas. Often, the value of γ drastically affects the electron power absorption dynamics, the plasma parameters and the quality of the separate control of ion flux and mean ion energy at the electrodes. Experimental results for γ under plasma exposure are difficult to obtain. Therefore, γ is either assumed to be a constant chosen with some uncertainty, or is approximated as a quantity that is a function of the ion energy and cleanliness of the electrode surface. It is hypothesized that these assumptions are not valid for all materials and plasma conditions. In this work, Hagstrum’s theory on Auger emission is suggested as a robust, ab initio model for accurately predicting γ for metal surfaces with a wide range of surface conditions and for a variety of ion species. To demonstrate the effect of the choice of γ on modeling results, we carry out particle-in-cell/Monte Carlo collision simulations of 13.56 MHz, single-frequency argon and helium capacitive discharges. Simulations are run assuming that: (i) γ is a constant, (ii) γ is an energy and surface condition dependent quantity that is independent of the electrode material, and (iii) γ is obtained from the ab initio model for different clean metals. The energy distribution of the emitted electrons resulting from Hagstrum’s theory is also implemented as a uniform, metal dependent distribution with physically accurate energy domain. It is found that this is important for some metals in both helium and argon. Lastly, it is observed that, depending on the assumed surface conditions, the plasma properties change dramatically. Based on these results we conclude that a realistic, material dependent implementation of γ is required to obtain realistic simulation results and that Hagstrum’s model suits this purpose.

1 July 2020 in Plasma Sources Science and Technology
Verified
Journal Article
Closed access
PDF file
PHPeter Hartmann
Peter Hartmann
LWLi Wang
Li Wang
KNK Nösges
K Nösges
BBBirk Berger
Birk Berger
SWSebastian Wilczek
Sebastian Wilczek
KNKatharina Noesges
Katharina Noesges
In high aspect ratio (HAR) dielectric plasma etching, dual-frequency capacitively coupled radio-frequency plasmas operated at low pressures of 1 Pa or less are used. Such plasma sources are often driven by a voltage waveform that includes a low-frequency component in the range of hundreds of kHz with a voltage amplitude of 10 kV and more to generate highly energetic vertical ion bombardment at the wafer. In such discharges, the energetic positive ions can overcome the repelling potential created by positive wall charges inside the etch features, which allows high aspect ratios to be reached. In order to increase the plasma density a high-frequency driving component at several 10 MHz is typically applied simultaneously. Under such discharge conditions, the boundary surfaces are bombarded by extremely energetic particles, of which the consequences are poorly understood. We investigate the charged particle dynamics and distribution functions in this strongly non-local regime in argon discharges by particle-in-cell simulations. By including a complex implementation of plasma-surface interactions, electron induced secondary electron emission ( δ -electrons) is found to have a strong effect on the ionization dynamics and the plasma density. Due to the high ion energies at the electrodes, very high yields of the ion induced secondary electron emission ( γ -electrons) are found. However, unlike in classical capacitive plasmas, these γ -electrons do not cause significant ionization directly, since upon acceleration in the high voltage sheaths, these electrons are too energetic to ionize the neutral gas efficiently. These γ - and δ -electrons as well as electrons created in the plasma bulk and accelerated towards the electrodes to high energies by reversed electric fields during the local sheath collapse are found to induce the emission of a high number of δ -electrons, when they hit boundary surfaces. This regime is understood fundamentally based on the following approach: first, dual-frequency discharges with identical electrode materials are studied at different pressures and high-frequency driving voltages. Second, the effects of using electrodes made of different materials and characterized by different secondary electron emission coefficients are studied. The electron dynamics and charged particle distribution functions at boundary surfaces are determined including discharge asymmetries generated by using different materials at the powered and grounded electrodes.

8 April 2021 in Journal of Physics D: Applied Physics
Verified
Journal Article
Open access
PDF file
PHPeter Hartmann
Peter Hartmann
LWLi Wang
Li Wang
KNK Nösges
K Nösges
BBBirk Berger
Birk Berger
SWSebastian Wilczek
Sebastian Wilczek
KNKatharina Noesges
Katharina Noesges
Low pressure single- or dual-frequency capacitively coupled radio frequency (RF) plasmas are frequently used for high-aspect ratio (HAR) dielectric etching due to their capability to generate vertical ion bombardment of the wafer at high energies. Electrons typically reach the wafer at low energies and with a wide angular distribution during the local sheath collapse. Thus, in contrast to positive ions, electrons cannot propagate deeply into HAR etch features and the bottom as well as the sidewalls of such trenches can charge up positively, while the mask charges negatively. This causes etch stops and distortion of profile shapes. Here, we investigate low pressure, high voltage capacitively coupled RF argon gas discharges by Particle-In-Cell/Monte Carlo collisions simulations and demonstrate that this problem can be solved by Voltage Waveform Tailoring, i.e. the velocity and angular distribution of electrons impacting on the electrodes can be tuned towards high velocities and small angles to the surface-normal, while keeping the energies of the impacting ions high. The applied voltage waveforms consist of a base frequency of 400 kHz with 10 kV amplitude and a series of higher harmonics. A high frequency component at 40 or 60 MHz is used additionally. Square voltage waveforms with different rise-times are examined as well. We show that high fluxes of electrons towards the wafer at normal velocities of up to 2.2 × 107 m s−1 (corresponding to 1.4 keV energy) can be realized.

1 September 2019 in Plasma Sources Science and Technology
Verified
Journal Article
Closed access
PDF file
SBSteven William Brandt
Steven William Brandt
BBBirk Berger
Birk Berger
ZDZoltan Donko
Zoltan Donko
ADAranka Derzsi
Aranka Derzsi
ESEdmund Schüngel
Edmund Schüngel
MKMark E Koepke
Mark E Koepke
The charged-particle power absorption dynamics in capacitively coupled plasmas operated in different CF 4 -Ar gas mixtures and driven by tailored voltage waveforms is experimentally investigated by phase-resolved optical emission spectroscopy in conjunction with kinetic simulations and an analytical model. Single- and triple-frequency ‘peaks’- and ‘valleys’-type waveforms (generated as a superposition of multiple consecutive harmonics of 13.56 MHz) are studied at pressures of 20 and 60 Pa with 25 mm electrode gap and 150 V total driving voltage amplitude to determine the effects of the tailored driving voltage waveform in different gas mixtures on the density profiles of the particle species, the electronegativity, the DC self-bias, and the excitation/ionization dynamics. As the argon content in the buffer gas is increased, the discharge switches from the drift-ambipolar (DA) power absorption mode to the α -mode. This transition occurs due to the disappearance of the bulk and ambipolar electric fields as the electronegativity of the plasma decreases with increasing argon content. This effect is more pronounced at higher pressures, where the negative ion density is higher. We observe a significant change in the plasma’s symmetry, DC self-bias, and mean electron energy as a result of the DA- to α -mode transition. At 60 Pa the simulation reveals a drastic increase of the spatially averaged electronegativity induced by increasing the argon admixture from 20% to 30%. This counterintuitive finding is explained by the effect of this admixture on the spatio-temporal electron dynamics. Finally, the generation of the DC self-bias as a function of the argon content is understood by the analytical model based on these fundamental insights into the plasma physics.

1 November 2019 in Plasma Sources Science and Technology
Verified
Journal Article
Open access
MOM Oberberg
M Oberberg
DED Engel
D Engel
BBB Berger
B Berger
CWC Wölfel
C Wölfel
DED Eremin
D Eremin
JSJ Schulze
J Schulze
In magnetized capacitively coupled radio frequency (RF) plasmas operated at low pressure, the magnetic asymmetry effect (MAE) provides the opportunity to control the discharge symmetry, the DC self-bias, and the ion energy distribution functions at boundary surfaces by adjusting a magnetic field, that is oriented parallel to the electrodes, at one electrode, while leaving it constant at the opposite electrode. This effect is caused by the presence of different plasma densities in regions of different magnetic field strength. Here, based on a balanced magnetron magnetic field configuration at the powered electrode, we demonstrate that the magnetic control of the plasma symmetry allows to tailor the generation of high frequency oscillations in the discharge current induced by the self-excitation of the plasma series resonance (PSR) through adjusting the magnetic field adjacent to the powered electrode. Experimental current measurements performed in an argon discharge at 1 Pa as well as results of an equivalent circuit model show that nonlinear electron resonance heating can be switched on and off in this way. Moreover, the self-excitation of the PSR can be shifted in time (within the RF period) and in space (from one electrode to the other) by controlling the discharge symmetry via adjusting the magnetic field.

1 July 2020 in Plasma Sources Science and Technology
Verified
Journal Article
Open access
MOM Oberberg
M Oberberg
BBB Berger
B Berger
MBM Buschheuer
M Buschheuer
DED Engel
D Engel
CWC Wölfel
C Wölfel
JSJ Schulze
J Schulze
Previous studies in low pressure magnetized capacitively coupled radio frequency (RF) plasmas operated in argon with optimized geometric reactor symmetry have shown that the magnetic asymmetry effect (MAE) allows to control the particle flux energy distributions at the electrodes, the plasma symmetry, and the DC self-bias voltage by tuning the magnetron-like magnetic field adjacent to one electrode (Oberberg et al 2019 Plasma Sources Sci. Technol. 28 115021; Oberberg et al 2018 Plasma Sources Sci. Technol. 27 105018). In this way non-linear electron resonance heating (NERH) induced via the self-excitation of the plasma series resonance (PSR) was also found to be controllable. Such plasma sources are frequently used for reactive RF magnetron sputtering, but the discharge conditions used for such applications are significantly different compared to those studied previously. A high DC self-bias voltage (generated via a geometric reactor asymmetry) is required to realize a sufficiently high ion bombardment energy at the target electrode and a reactive gas must be added to deposit ceramic compound layers. Thus in this work, the MAE is investigated experimentally in a geometrically asymmetric capacitively coupled RF discharge driven at 13.56 MHz and operated in mixtures of argon and oxygen. The DC self-bias, the symmetry parameter, the time resolved RF current, the plasma density, and the mean ion energy at the grounded electrode are measured as a function of the driving voltage amplitude and the magnetic field at the powered electrode. Results obtained in pure argon discharges are compared to measurements performed in argon with reactive gas admixture. The results reveal a dominance of the geometrical over the magnetic asymmetry. The DC self-bias voltage as well as the symmetry parameter are found to be only weakly influenced by a change of the magnetic field compared to previous results obtained in a geometrically more symmetric reactor. Nevertheless, the magnetic field is found to provide the opportunity to control NERH magnetically also in geometrically asymmetric reactors. Adding oxygen does not alter these discharge properties significantly compared to a pure argon discharge.