To counter the technical difficulties faced by gob-side entry retaining (GER) under multiple complex mining geological conditions in China, this paper introduces a GER method with fully mechanized gangue backfilling mining. A similar materials simulation experiment was conducted to simulate the gob-backfilled GER process by using the similar model test system containing an independently developed horizontal pushing load device. The experimental results show that the compaction speed of the backfilling area (BFA) can be improved, and the main roof subsidence can be reduced by increasing the horizontal pushing load and reducing the attenuation rate of the stress in BFA. The designed roadside backfill body (RBB) containing a flexible cushion is adaptive to the given deformation of the main roof, thus reducing the stress concentration of the RBB. The field test results show that when a 2 MPa horizontal pushing load is exerted in the BFA, arranging a 200 mm high-water-material flexible cushion can cause the BFA to swiftly change to the compaction stage. After stabilized deformation, the roadway section satisfies the design and application requirements. The feasibility and rationality of the GER with the fully mechanized gangue backfilling mining are proved, providing a safe, efficient, and environmentally friendly mining method without using a coal pillar.
Based on the theory of elastic foundation beam, the mechanical model of the backfilling mining support‐roof rock beam‐gangue filling body under the condition of comprehensive mechanized filling mining is established. The foundation coefficient of each part is determined, and the subsidence of each part of roof rock beam is calculated. It is found that the initial filling height is the decisive factor to control the subsidence and migration stability of each part of the roof rock beam. Properly increasing the pushing force of backfilling‐coal mining hydraulic support on the filling body can also effectively control the roof subsidence. The comprehensive mechanized filling mining process was studied by similar simulation experiments, it is found that the influence law of initial filling height on roof rock beam subsidence is the same as that of theoretical analysis, and the experimental measurement values and fitting function relationships are consistent with the theoretical calculation results.
1 November 2021 in Russian Journal of Nondestructive Testing
—We combine the empirical mode decomposition (EMD) method with the multiscale entropy (MSE) method to quantify the number of internal defects in the bolt anchoring system so as to ensure the safety and reliability of the bolt anchoring structure. An experimental system for nondestructive testing (NDT) of anchoring quality is designed and manufactured by ourselves. On this system, the stress wave reflection method is used for NDT of the anchoring system in two kinds of conditions, with some or without defects. The EMD method is used to eliminate the high frequency components and trend terms in the detected signal, and then the MSE method is used to characterize the complexity of the reconstructed signal. The results show that the complexity of NDT signal of anchoring system with defects is higher than that of NDT signal of anchoring system without defects. And there is a clear corresponding relationship between the complexity of NDT signal and the number of defects. Moreover, an application example of this method in on-site NDT signal analysis of bolt anchoring system in coal mine is presented, which demonstrates the feasibility of this method in engineering application. It provides an effective way for quantitative evaluation of anchoring quality.
With the deployment of China’s energy strategy in the western regions, complex geological mining conditions such as thin bedrock and ultrathick seams in western China have caused a series of problems such as serious deformation of the surrounding rock at the ends of the working face and the increase in the lead abutment pressure of the roadways; the research on end roof deformation in the resource exploitation in western China has become one of the great demands of the industry. Based on the failure characteristics of rock mass, relying on the actual mining geological conditions of a coal mine in Inner Mongolia, the failure characteristics of the overlying rock strata under the influence of mining were simulated and analyzed using similar material simulation experiment, which intuitively reproduced the failure and deformation processes of the immediate roof, main roof, and key strata and revealed the mechanical mechanism of the directional weakening of the end roof. It is of great significance for the stability control of the surrounding rock at the end of the fully mechanized caving face in the thin bedrocks and ultrathick seams, reducing the abutment pressure of gate roadway and controlling the spontaneous combustion of residual coal in the goaf.