2 July 2024 in GPS Solutions
17 August 2024 in Advances In Space Research
16 July 2025 in GPS Solutions
9 January 2025 in Measurement Science and Technology
Establishing a regional ionospheric model to provide precise ionospheric products is a prerequisite for rapid real-time kinematic precise point positioning (PPP-RTK). Then a stochastic model for those real-time ionospheric products is also crucial. In this study, we use a Wuhan regional network (average inter-station distance of about 30 km) to comparatively analyze four regional ionospheric modeling methods with commonly-used stochastic models: the inverse distance weighting model (IDW), the quasi‑4‑dimension ionospheric modeling (Q4DIM), the first-order polynomial function model with internal validation (POLY), and the first-order polynomial function model with external validation (POLY-EV). Our results show that, the POLY/POLY-EV model has the smallest ionospheric delay interpolation RMS error, no matter whether for inside or peripheral stations of the regional network, during both quiet and active ionospheric conditions. For 4024 and 4314 one-hour samples, the PPP-RTK results show that at inside stations, all four models converge to a horizontal precision of 10 cm within two epochs, with the POLY-EV model having the highest horizontal positioning precision (a mean RMS of 0.83 cm). At the peripheral station, PPP-RTK with the POLY/POLY-EV model achieves a horizontal precision of 10 cm within two epochs, while the IDW and Q4DIM models need 4 and 43 epochs, respectively. The horizontal positioning precision of PPP-RTK using the POLY-EV model is the highest, with a mean RMS of 1.59 cm.
25 April 2025 in Measurement Science and Technology
Inter-frequency clock bias (IFCB) products are crucial for GPS L1/L5 and BDS-2 B1/B2 precise point positioning with ambiguity resolution (PPP-AR). The computationally efficient epoch-differenced IFCBs are not adequately precise for PPP-AR, while generating precise IFCB products from the undifferenced uncombined network requires several hours. In this study, we proposed a strategy to fast and precisely estimate IFCB products with the carrier-range network solution. The epoch-differenced model was employed to estimate a priori IFCB products, instead of the undifferenced uncombined network solution. Then the IFCBs are re-estimated with carrier ranges, which come from PPP, reducing tens of thousands of ambiguity parameters and speeding up network solutions. GPS and BDS-2 multi-frequency data from 372 stations over 31 d in 2024 were archived for the IFCB estimation and performance evaluation. When 250 stations were used to estimate IFCB products, the processing only took 88 min. Compared with the undifferenced uncombined model, the proposed strategy saved 56.4% of the computational time. The root mean square (RMS) of the differences between estimated IFCBs and the benchmark IFCBs (i.e. GPS L1/L2 and L1/L5 clock offset differences) was 0.07 ns, matching the RMS of IFCBs from undifferenced uncombined network solution. For BDS-2, the RMS difference amounted to 0.02 ns. When these carrier-range IFCBs were used in PPP-AR instead of epoch-differenced IFCBs, the RMS of positioning errors for GPS L1/L5 static PPP-AR solutions improved from 7.0, 5.7, 15.6 mm to 2.7, 2.9, and 8.9 mm in the east, north and up directions, respectively, which is comparable to using IFCBs from undifferenced uncombined network solution. The mean narrow-lane ambiguity fixing rate improved by 20.6% for GPS and 9.9% for BDS-2. Therefore, this strategy enhances efficiency while guaranteeing the precision of the IFCBs, and can offer a rapid and precise IFCB product to support GPS L1/L5 and BDS-2 B1/B2 PPP-AR.