Nolan S. Hendricks

Nolan S. Hendricks

Auto-generated profile, based on publicly available information

Nolan S. Hendricks

Air Force Research Laboratory, Sensors Directorate, Wright-Patterson AFB 1 , Dayton, Ohio 45433

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 November 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
EFEsmat Farzana
Esmat Farzana
SRSaurav Roy
Saurav Roy
NHNolan S. Hendricks
Nolan S. Hendricks
SKSriram Krishnamoorthy
Sriram Krishnamoorthy
JSJames S. Speck
James S. Speck
We demonstrate Schottky barrier engineering using PtOx/thin Pt Schottky contacts combined with edge termination using a high permittivity dielectric (ZrO2) field-plate for high-voltage vertical β-Ga2O3 diodes. A systematic study of baseline bare Pt/β-Ga2O3, PtOx/thin Pt/β-Ga2O3, and PtOx/β-Ga2O3 Schottky diode characteristics was performed, which revealed that the PtOx/thin Pt/β-Ga2O3 contact can combine the advantages of both PtOx and Pt, allowing better reverse blocking performance than plain metal Pt/β-Ga2O3 Schottky diodes and lower turn-on voltage than plain oxidized metal PtOx/β-Ga2O3 ones. Moreover, the thin Pt interlayer in the PtOx/thin Pt/β-Ga2O3 anode contact configuration, deposited by e-beam deposition, also provides plasma-free interface at the Schottky junction as opposed to the direct sputter deposited PtOx contacts of the PtOx/β-Ga2O3 diodes. We further implemented a high permittivity dielectric (ZrO2) field plate in PtOx/thin Pt/β-Ga2O3 diodes that assisted in edge-field management and enabled a breakdown voltage to ∼2.34 kV. These results indicate that the PtOx/thin Pt/β-Ga2O3 Schottky contact, combined with a high permittivity field-plate, will be promising to enable Schottky barrier engineering for high-performance and efficient vertical β-Ga2O3 power switches.

12 December 2022 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
AIAhmad Ehteshamul Islam
Ahmad Ehteshamul Islam
NSNicholas P. Sepelak
Nicholas P. Sepelak
KLKyle J. Liddy
Kyle J. Liddy
RKRachel Kahler
Rachel Kahler
DDDaniel M. Dryden
Daniel M. Dryden
AGAndrew J. Green
Andrew J. Green
We demonstrated 500 °C operation of field-effect transistors made using ultra-wide bandgap semiconductor β-Ga2O3. Metal–semiconductor field-effect transistors were fabricated using epitaxial conductive films grown on an insulating β-Ga2O3 substrate, TiW refractory metal gates, and Si-implanted source/drain contacts. Devices were characterized in DC mode at different temperatures up to 500 °C in vacuum. These variable-temperature measurements showed a reduction in gate modulation of the drain current due to an increase in gate leakage across the gate/semiconductor Schottky barrier. Devices exhibited a reduction in transconductance with increasing temperature; despite this, drain current increased with temperature due to a reduction in threshold voltage caused by the de-trapping of electrons from deep-level traps. Devices also showed negligible change in semiconductor epitaxy and source/drain contacts, hence demonstrated recovery to their room-temperature electrical properties after the devices were tested intermittently at different high temperatures in vacuum. The mechanism of gate leakage was also explored, which implicated the presence of different conduction mechanisms at different temperatures and gate electric fields.

13 June 2022 in IEEE Electron Device Letters
Verified
Journal Article
Open access
DDDaniel M. Dryden
Daniel M. Dryden
KLKyle J. Liddy
Kyle J. Liddy
AIAhmad Ehteshamul Islam
Ahmad Ehteshamul Islam
JWJeremiah C. Williams
Jeremiah C. Williams
DWDennis E. Walker
Dennis E. Walker
AGAndrew J. Green
Andrew J. Green
We demonstrate a passivated MESFET fabricated on (010) Si-doped $\beta $ -Ga 2 O 3 with breakdown over 2.4 kV without field plates, high Power Figure of Merit (PFOM), and high estimated Huang’s Material Figure of Merit (HMFOM), owing to low gate charge and high breakdown. MESFETs with 13 $\mu \text{m}$ source-drain spacing and 75 nm channel exhibited a current density of 61 mA/mm, peak transconductance of 27 mS/mm, and on-resistance of ${133}~\Omega \cdot \text {mm}$ . The device showed a PFOM competitive with state-of-the-art $\beta $ -Ga 2 O 3 devices and a record high estimated HMFOM for a $\beta $ -Ga 2 O 3 device, competitive with commercial wide-band gap devices. This demonstrates high-performance $\beta $ -Ga 2 O 3 devices as viable multi-kV high-voltage power switches.

1 July 2023 in Applied Physics Express
Verified
Journal Article
Open access
PDF file
NHNolan S. Hendricks
Nolan S. Hendricks
EFEsmat Farzana
Esmat Farzana
AIAhmad E. Islam
Ahmad E. Islam
KLKevin D. Leedy
Kevin D. Leedy
KLKyle J. Liddy
Kyle J. Liddy
AGAndrew J. Green
Andrew J. Green
We demonstrate vertical Pt/TiO2/β-Ga2O3 metal–dielectric–semiconductor (MDS) diodes and compare performance with co-fabricated Pt/β-Ga2O3 Schottky diodes (SBDs). The MDS diode exhibits a lower turn-on voltage and leakage current. In addition, the breakdown voltage increased from 548 V for an SBD to 1380 V for a MDS diode. The improvement in the off-state characteristics compared to a SBD while simultaneously reducing on-state losses leads to lower power dissipation at all duty cycles, indicating the great promise of this device architecture for advancing low-loss β-Ga2O3 rectifiers toward material limits.

4 March 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
NHNolan S. Hendricks
Nolan S. Hendricks
AIAhmad Ehteshamul Islam
Ahmad Ehteshamul Islam
ESElizabeth A. Sowers
Elizabeth A. Sowers
JWJeremiah Williams
Jeremiah Williams
DDDaniel M. Dryden
Daniel M. Dryden
AGAndrew J. Green
Andrew J. Green
β-Ga2O3 is of great interest for power electronic devices with efficiency beyond current generation Si, 4H-SiC, and GaN devices due to its large breakdown electric field of ∼8 MV/cm. However, taking advantage of this large field strength in power diodes requires device engineering to reduce leakage current that arises at high electric fields. In this work, we elucidate the current transport mechanisms of metal/TiO2/β-Ga2O3 diodes, showing that thermionic emission is an excellent descriptor of current in forward and reverse bias. It is shown that tunneling current is greatly suppressed, and consequently, that the diodes with the TiO2 interlayer can block orders of magnitude more current than Schottky barrier diodes with the same barrier heights. Finally, a 1200 V diode structure is designed based on the derived transport models, and calculated on- and off-state current characteristics closely align with those of state-of-the-art 4H-SiC commercial devices, indicating that this diode structure is ready to enable the realization of β-Ga2O3 power diodes.

26 March 2024 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Open access
PDF file
JWJeremiah Williams
Jeremiah Williams
WWWeisong Wang
Weisong Wang
NHNolan S. Hendricks
Nolan S. Hendricks
AAAaron Adams
Aaron Adams
JPJoshua Piel
Joshua Piel
AGAndrew Green
Andrew Green
This work demonstrates TiO2/β-Ga2O3 metal–dielectric–semiconductor (MDS) diodes with an average breakdown field beyond the material limits of SiC and GaN. These MDS diodes have lower conduction losses and higher breakdown voltage (Vbk) than the cofabricated Schottky barrier diodes (SBDs), simultaneously improving both on- and off-state parameters that are typically in competition with each other. With further optimized field management using p-NiO guard rings (GRs), the Ni/TiO2/β-Ga2O3 MDS diodes present a path to realistically utilize the high critical field of Ga2O3 without large forward conduction losses from a high-barrier junction. MDS diodes showed a lower Von (0.8 V) than the SBDs (1.1 V) from linear extrapolation of the current density-voltage (J-V) curve. The MDS diode had higher Vbk of 1190 V (3.0 MV/cm) compared to 685 V (2.3 MV/cm) for the SBD, and the MDS diode with the p-NiO guard ring saw further improvement with Vbk of 1776 V (3.7 MV/cm) compared to 826 V (2.5 MV/cm) for GR SBD. The BFOM (Vbk2/Ron,sp) of 518 MW/cm2 for the GR HJD is competitive with other literature results. A new figure of merit that includes the impact of turn on voltage is also proposed and demonstrated in this paper, which highlights how diodes perform in a practical high-power operation. This full paper is derived from the proceeding abstract of Willams et al. [IEEE Device Research Conference, Santa Barbara, CA, 25-28 June 2023 (IEEE, New York, 2023)].