S-2 glass composites can readily serve as backing materials for armor systems due to their light weight and tensile properties. However, high-fidelity ballistic modeling of these composites requires accurate predictions of their nonlinear deformation and failure behaviors, which can prove challenging. This paper describes simulations of a plain-weave S-2 glass composite at the mesoscale using a mesh geometry that individually models the S-2 glass yarns, epoxy resin matrix, and yarn/matrix interfaces as separate entities. Simulation results are compared to a wide variety of mechanical tests designed to measure the response of the composite to tension, shear, and delamination. Although the individual yarns, matrix, and interfaces are described using relatively simple material models, the overall composite model can accurately reproduce behaviors such as nonlinear deformation, yarn breakage, and delamination in both tension and shear.
18 April 2023 in Journal of Dynamic Behavior of Materials
The addition of Z-yarns to an S-2 glass composite can increase the material's resistance to interlayer delamination and damage. However, the presence of the Z-yarns also complicates the resulting constitutive behavior, as multiple individual failure mechanisms (e.g. yarn/matrix delamination, yarn breakage) may occur before the overall ultimate failure of the composite is reached. A mesoscale model of a 3D-weave composite was created to provide insights into these processes. Material models for the yarns, matrix, and interfaces were previously developed for a similar plain-weave composite. These were combined with a complicated unit cell geometry that could be used to construct specimen meshes that closely matched the physical characteristics of the 3D-weave composite. Numerical simulations conducted using this model can reproduce most aspects of the load–displacement curves and the observed failure mechanisms from tension, torsion, and delamination tests.