Jinghua Zhang

Jinghua Zhang

Auto-generated profile, based on publicly available information

Jinghua Zhang

Department of Electrical Engineering, Tsinghua University, Beijing 100084, People’s Republic of China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 July 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YLYue Long
Yue Long
JZJinghua Zhang
Jinghua Zhang
Songling HuangSongling Huang
Songling Huang
Lisha PengLisha Peng
Lisha Peng
WWWenzhi Wang
Wenzhi Wang
WZWei Zhao
Wei Zhao
Cracks that may cause pipeline cracking and leakage become the main risk of in-service pipelines after conventional metal loss defects have been detected. Therefore, it is imperative to develop ultra-high-definition magnetic flux leakage (MFL) detection for cracks. Due to the larger spatial sampling interval of conventional MFL inspections than the crack defect width, sparse sampling will result in problems such as missed detection of crack defects or insufficient signal sampling of crack defect MFL signals. To address the problem, this paper presents a detection topology in which the magnetic field signal is integrated first and then sampled, and it can effectively sample the leakage magnetic field of cracks. Furthermore, a magnetic field spatial integration (MFSI) method is proposed based on the magnetic dipole model, which develops an analytical solution for the depth quantification of crack defects. Using the multi-MFL spatial integral values under different lift offs, iterative equations are constructed, and the numerical solution for the width quantification of crack defects is provided. The finite element simulation and physical experiment are constructed. And, the results show that the proposed MFSI method can realize the quantification of crack size. When the crack defect aspect ratio is greater than 4, the quantization error of the crack depth and width does not exceed 0.7 mm and 0.1 mm, respectively. The robustness of the MFSI method for crack quantification is also discussed and verified. Moreover, based on theoretical analysis and simulation data, this paper concludes that the distribution of cracks MFL signal is width-insensitive, which would cause that classic MFL opening profile recognition methods for metal loss defects are no longer applicable to crack defects. Therefore, the proposed MFSI method is useful and meaningful for crack defect quantification in ultra-high-definition MFL detection.

18 January 2024 in Sensors
Verified
Journal Article
Open access
PDF file
JZJinghua Zhang
Jinghua Zhang
Lisha PengLisha Peng
Lisha Peng
SWshuzhi wen
shuzhi wen
Songling HuangSongling Huang
Songling Huang
Concrete structures have emerged as some of the most extensively utilized materials in the construction industry due to their inherent plasticity and high-strength characteristics. However, due to the temperature fluctuations, humidity, and damage caused by human activities, challenges such as crack propagation and structural failures pose threats to the safety of people’s lives and property. Meanwhile, conventional non-destructive testing methods are limited to defect detection and lack the capability to provide real-time monitoring and evaluating of concrete structural stability. Consequently, there is a growing emphasis on the development of effective techniques for monitoring the health of concrete structures, facilitating prompt repairs and mitigation of potential instabilities. This paper comprehensively presents traditional and novel methods for concrete structural properties and damage evolution monitoring, including emission techniques, electrical resistivity monitoring, electromagnetic radiation method, piezoelectric transducers, ultrasonic techniques, and the infrared thermography approach. Moreover, the fundamental principles, advantages, limitations, similarities and differences of each monitoring technique are extensively discussed, along with future research directions. Each method has its suitable monitoring scenarios, and in practical applications, several methods are often combined to achieve better monitoring results. The outcomes of this research provide valuable technical insights for future studies and advancements in the field of concrete structural health monitoring.

8 January 2025 in Measurement Science and Technology
Verified
Journal Article
Closed access
BWBingkun Wei
Bingkun Wei
SWShuzhi Wen
Shuzhi Wen
LPLisha Peng
Lisha Peng
JZJinghua Zhang
Jinghua Zhang
ZHZheng Han
Zheng Han
Songling HuangSongling Huang
Songling Huang
Lithium-ion batteries are recognized as a critical technology for modern energy storage, with copper foil frequently used as the current collector for the anode. However, the presence of micro-defects in copper foil can significantly degrade the electrochemical performance of lithium-ion batteries. Therefore, a method capable of accurately detecting micro-defects during high-speed production and subsequently quantifying their sizes is required. Motion-induced eddy current (MIEC) technology, characterized by relative motion, has been employed to detect defects in conductive materials during high-speed movement. However, limited research has been conducted on the quantification of defect sizes based on MIEC signals. In this study, a novel method for quantifying the size of micro-defects in copper foil based on MIEC signal features is proposed. Wavelet soft-thresholding and morphological filtering are combined to effectively remove high-frequency noise and signal fluctuations caused by variations in lift-off distance. Eight distinct features of the micro-defect-induced eddy current signals are defined, and a feature dataset for various sizes of copper foil micro-defects at different motor speeds is established. The IVY algorithm, known for its excellent optimization speed, is used to optimize the hyperparameters of a conventional convolutional neural network (CNN)-bidirectional long short-term memory (BiLSTM)-Attention model, resulting in the development of the IVY-CNN-BiLSTM-Attention model. The experimental results demonstrate that superior performance is achieved, with accurate micro-defect size quantification in copper foil.

26 April 2022 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
WWWenzhi Wang
Wenzhi Wang
Songling HuangSongling Huang
Songling Huang
JZJinghua Zhang
Jinghua Zhang
YLYue Long
Yue Long
SWShen Wang
Shen Wang
WZWei Zhao
Wei Zhao
An appropriate modeling technique is critical for the quick analysis of alternating current (ac) field measurements destined for qualitative or quantitative studies of surface defects in conductive materials. Traditional modeling techniques often use the finite-difference method to solve the governing Laplace equation in the crack region, which gives a closed-form solution in the Fourier domain for regions outside the crack. However, these models are complex and only useful for cracks with extremely narrow openings. This article proposes an approximate analytical model that is based on current shunting of parallel circuits and the Biot–Savart law. We assume that the current induced by a high-frequency current-carrying coil is evenly distributed within a very thin layer at the surface of a conductor. In the presence of a defect, the current flows only along the edges and the bottom of the defect. Under these assumptions, the model simplifies the induced current by treating it as due to many current sources of equal amplitude. The magnetic field above the defect can be mathematically described by the linear superposition of these current sources. The proposed model can thus be used to analyze cracks with wider openings. We compare the magnetic-field signals of flat-bottomed cracks of various sizes as obtained by the proposed model and the finite-element method and also explore cracks with complex bottom profiles. The results show that the proposed model produces accurate quantitative and qualitative results for a wider range of defects.

30 June 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
BWBingkun Wei
Bingkun Wei
Lisha PengLisha Peng
Lisha Peng
SWshuzhi wen
shuzhi wen
JZJinghua Zhang
Jinghua Zhang
Shisong LiShisong Li
Shisong Li
Songling HuangSongling Huang
Songling Huang
As production speeds continue to increase, accurately measuring defects during the high-speed motion of samples becomes of significant practical importance. Motion-induced eddy current (MIEC) is a nondestructive testing method well-suited for detecting defects in high-speed moving samples. Existing studies typically employ permanent magnets or coils as excitation sources, without addressing the impact of the central magnetic field and magnetic field gradient of the excitation source on the generated MIEC signals. This study analyzes, both theoretically and through simulations, the influence of the central magnetic field and magnetic field gradient on MIEC signals. Based on these findings, a new excitation source structure is designed, and an improved multi-objective RIME optimization algorithm is proposed to optimize the shape of the magnetic yoke surrounding the permanent magnet. Numerical simulations demonstrate that the optimized excitation source structure significantly enhances the amplitude of defect signals, across various sample motion speeds. Finally, an experimental setup is constructed to validate the results. The experimental results indicate that the optimized excitation source structure effectively enhances the MIEC signal amplitude for five different slot-shaped defects ranging from 0.5 mm to 2.5 mm in length on the aluminum disk, with a minimum amplitude increase of 52% and a maximum of 74.1%.

10 March 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
WWWenzhi Wang
Wenzhi Wang
Songling HuangSongling Huang
Songling Huang
JZJinghua Zhang
Jinghua Zhang
YLYue Long
Yue Long
SWShen Wang
Shen Wang
WZWei Zhao
Wei Zhao
Girth welds in pipelines are critical links on which the pipeline system depends. After long-term operation, defects may appear at the weld root, which seriously threatens the safety of the system. Cracks are the most dangerous defect, especially multiple clustered cracks. Some closely spaced cracks are often misjudged as corrosion defects, leading to an error estimation of residual strength of pipelines and causing sudden accidents. The accurate characterization of closely spaced cracks is thus of great significance for subsequent hazard assessment. However, traditional nondestructive testing methods all have limitations because of the complex stress distribution and excess weld penetration at the weld root. To solve this problem, we propose to detect cracks using uniform magnetic field distortion (UMFD) method, which is highly sensitive to surface defects but insensitive to local variations in stress. This article proposes an analytical model of an isolated crack whose variables are merely the position and width of the crack. Furthermore, we provide a characterization algorithm based on this analytical model for evaluating the position and width of subcracks. Both the simulation and experimental results indicate that the proposed method accurately characterizes cracks. To assess the robustness of the proposed algorithm, additive white Gaussian noise with signal-to-noise ratios (SNRs) of 5 and 10 dB is superposed onto the raw data from the simulation. The results show that this method is robust against background noise.