17 February 2022 in Electrical Engineering & Electromechanics
Purpose. This article proposes a new control strategy for Dynamic Voltage Restorer (DVR) in utility grid for distribution system. The proposed DVR using PI tuned fuzzy logic scheme is based on replacement of conventional DVR and voltage sag compensation in distribution system network. The novelty of the proposed work consists in presenting an enhanced PI tuned fuzzy logic algorithm to control efficiently the dynamic voltage restorer when voltage sag is suddenly occurred. Methods. The proposed algorithm which provides sophisticated and cost-effective solution for power quality problems. Our strategy is based on tuned fuzzy control of reactive powers and also closed loop for harmonic reduction in distribution system. The proposed control technique strategy is validated using MATLAB / Simulink software to analysis the working performances. Results. The results obtained clearly show that DVR using PI tuned fuzzy logic have good performances (sag compensation, harmonic reduction) compared to conventional DVR. Originality. Compensation of voltage sag/ swell in distribution for reactive power and current harmonic reduction by using DVR based PI tuned fuzzy logic controller. Practical value. The work concerns the comparative study and the application of DVR based on PI tuned fuzzy techniques to achieve a good performance control system of the distribution system. This article presents a comparative study between the conventional DVR control and PI tuned fuzzy DVR control. The strategy based on the use of a PI tuned fuzzy controller algorithm for the control of the continuous voltage sag and harmonic for the distribution network-linear as well as non-linear loads in efficient manner. The study is validated by the simulation results based on MATLAB / Simulink software.
18 April 2022 in Electrical Engineering & Electromechanics
Purpose. This article proposes a new control strategy for static synchronous compensator in utility grid system. The proposed photovoltaic fed static synchronous compensator is utilized along with recurrent neural network based reference voltage generation is presented in grid system network. The novelty of the proposed work consists in presenting a Landsman converter enhanced photovoltaic fed static synchronous compensator with recurrent neural network algorithm, to generate voltage and maintain the voltage-gain ratio. Methods. The proposed algorithm which provides sophisticated and cost-effective solution for utilization of adaptive neuro-fuzzy inference system as maximum power point tracking assures controlled output and supports the extraction of complete power from the photovoltaic panel. Grid is interconnected with solar power, voltage phase angle mismatch, harmonic and voltage instability may occur in the distribution grid. The proposed control technique strategy is validated using MATLAB/Simulink software and hardware model to analysis the working performances. Results. The results obtained show that the power quality issue, the proposed system to overcome through elimination of harmonics, reference current generation is necessary, which is accomplished by recurrent neural network. By recurrent neural network, the reference signal is generated more accurately and accordingly the pulses are generated for controlling the inverter. Originality. Compensation of power quality issues, grid stability and harmonic reduction in distribution network by using photovoltaic fed static synchronous compensator is utilized along with recurrent neural network controller. Practical value. The work concerns the comparative study and the application of static synchronous compensator with recurrent neural network controller to achieve a good performance control system of the distribution network system. This article presents a comparative study between the conventional static synchronous compensator, static synchronous compensator with recurrent neural network and hardware implementation with different load. The strategy based on the use of a static synchronous compensator with recurrent neural network algorithm for the control of the continuous voltage stability and harmonic for the distribution network-linear as well as non-linear loads in efficient manner. The study is validated by the simulation results based on MATLAB/Simulink software and hardware model.
30 April 2023 in INTERNATIONAL JOURNAL OF EXPERIMENTAL RESEARCH AND REVIEW
In the research work presented in this paper, we present a grid-connected solar photovoltaic (PV) system, which is focused on various factors, such as the low oxide emission and high energy efficiency of the system. Solar PV systems have a greater impact on grid stability than any other energy source. IEEE 14 bus test system is used to verify the voltage stability of the bus. It is a concept of a methodology using a RNN-based PV controller in conjunction with a Landsman converter to maintain the PV system's voltage-gain ratio and improve it. Conversely, an ANN-based boost Integrated Landsman Converter improves the solar photovoltaic voltage connected to the grid. In addition, continuous monitoring of solar plants (irradiation, sunlight & voltage) is implemented through the Internet of Things (IoT). A grid voltage stability and analysis is taken by 14 buses, five generators and 12 loads test system is tested. The proposed two methods have been proven to be effective regarding the uncertainties related to loading demand. This approach offers voltage stability for grid-connected PV systems in industrial sectors. The IEEE 14 & 30 bus system tested this work using MATLAB simulation.
19 February 2024 in PRZEGLĄD ELEKTROTECHNICZNY
The growing prevalence of sensitive power electronic loads and PV system installations in distributed power system have sparked serious concerns about the maintenance of Power Quality (PQ). The non-linear current drawn by these sensitive loads lead to significant amount of voltage instabilities at the Point of Common Coupling (PCC), while intermittency associated with the Photovoltaic (PV) system incites grid instability. Thus, the poor PQ has adverse impact over the lifetime of every components interfaced to the distributed power system, ensuing enormous economic losses. With the aim of enhancing the stability of the distributed power system by curbing the PQ issues, a Static Synchronous Compensator (STATCOM), which is an effective Flexible AC Transmission Systems (FACTS) controller is selected in this work. Moreover, the output from the PV is maximized with the aid of Boost Integrated Landsman Converter (BILC) and Cascaded Adaptive Network-based Fuzzy Inference System (ANFIS) based Maximum Power Point Tracking (MPPT) approach. Moreover, the essential parameters that impact the operation of the proposed topology is tracked and monitored in Internet of Things (IoT) platform. The entire approach is evaluated experimentally and through MATLAB simulation.
1 January 2010 in International Journal of Computer and Electrical Engineering