21 April 2023 in International Journal of Structural Stability and Dynamics
27 December 2019 in Journal of Vibration and Control
Top tension riser is one of the most frequently used and vulnerable equipment in deep-sea petroleum engineering. With experiments and CFD simulations, researchers have found some hysteresis phenomenon and bistable behavior in vortex-induced vibration of the cylinders. However, there is still insufficient research on the bifurcation phenomenon and the multi-stable behavior of the riser vortex-induced vibration. In this study, based on the Van der Pol wake oscillator model, the vortex-induced vibration cross-flow governing equations of the riser fluid structure–coupled system in linear shear flow are established. Then the simplified multi-degrees-of-freedom model with 15-order modes is derived by the Galerkin method. Poincare map is utilized to obtain bifurcation diagram and identify the dynamic property of the top tension riser in a wide flow velocity range. Nonlinear dynamic behavior such as bistable behavior and even tristable behavior are discovered from the bifurcation diagram. Combined with the riser coupled system’s eigen analysis and the three-dimensional spectrum contour, it is found that there are various phenomena of mode interaction in the riser system, including 1:3 internal resonance phenomenon. Such study can provide reference and guide the design and optimization of riser structural parameters.
1 January 2019 in Mathematical Problems in Engineering
The top tension riser (TTR) is one of the most frequently used equipment in deep‐sea petroleum engineering. At present, the research methods of its vortex‐induced vibration (VIV) are mainly focused on finite element analysis and experiment. The understanding of its various nonlinear mechanical mechanisms would be inadequate via limited numerical or experimental studies rather than nonlinear analysis of its rich dynamics. Based on the Van der Pol wake oscillator model, the nonlinear dynamic model of the TTR subject to shear flow VIV is established. The proposed model includes the fluid‐structure interaction of the TTR under shear flow. Dynamic behavior of the TTR in association with the variation of flow velocity is investigated. The dynamic behavior is simulated by computing the local maximum displacement response via the fifth‐order Galerkin discretization. The Poincare map is then utilized to quantify the dynamic property of TTR under each individual flow velocity, which helps identifying the bifurcation path of the nonlinear system. The time history, phase diagram, FFT spectrum, and envelope diagram about the riser VIV at typical flow velocity in different regions of the bifurcation diagram are then given. It is found that the VIV response of the TTR depicts the Hopf bifurcation phenomena with bistable characteristics. Together with the structural eigen‐analysis and the three‐dimensional spectrum contour, the main dynamic features of the TTR in shear flow are more comprehensively understood. Such understandings may provide new ideas and references for the design and optimization of the riser structural parameters.
18 December 2018 in Mathematical Problems in Engineering
Top-tensioned riser (TTR) is one of the most frequently used pieces of equipment in offshore petroleum engineering. At present, the research of its vortex-induced vibration (VIV) is mainly focused on numerical simulation with few analytical approaches. In this paper, the nonlinear dynamic equation of VIV about TTR is developed by introducing the third-order variable lift coefficient hydrodynamic model. The amplitude-frequency response equation under 1:1 primary resonance excitation is deduced based on the single mode discrete results. The nonlinear dynamic responses characteristics of the TTR vibration under the excitation of vortex-induced resonance are discussed. Bifurcation theory is used to study the singularity of the analytical solution of the riser system. The hysteresis and solitary solutions from the results of singularity analysis are found. Such results can provide guidance for the design and optimization of riser structural parameters.
10 September 2018 in Mathematical Problems in Engineering
Switched reluctance motor (SRM) generates a very large electromagnetic radial force when the stator windings commutate because of its doubly salient structure and magnetic saturation. Lateral vibration appears when electromagnetic radial force is applied onto the rotational rotor, which causes continual changes of airgap and further radical electromagnetic force. Nonlinear vibration of the rotor under the interaction of electromagnetic radial force and displacement becomes very complicated, which is becoming a research hotspot at present. A whole lateral vibration dynamics equation is established by finite element method. The radical force formula of single rotor tooth was deduced by integration of equivalent electromagnetic circuit and Maxwell stress method, and final functional expression of radial electromagnetic resultant when stator windings are energized with ideal square wave is also obtained. The critical speeds and vibration modes of the rotor are analyzed by Campbell diagram and lateral vibration displacement locus is solved by Newmark-Beta numerical integration method. The results show that the vibration locus of the rotor distributes in a circular domain. The frequency distribution of electromagnetic resultant relates to rotation speed, current switch frequency, and current wave, while the frequency distribution of the displacement also closely relates to the first-order critical speed of the rotor. When the rotor runs at some specific speed, lateral superharmonic resonance phenomenon appears and its displacement locus shows rich diversity. Lateral vibration characteristic of the rotor could be quickly grasped through this study, which makes vibration evaluation possible for advanced motor design.