30 September 2021 in IEEE Internet of Things Journal
This article addresses the issue of reliability in the Industrial Internet of Things (IIoT) in case of missing sensors measurements due to network or hardware problems. We propose to support the fault detection and classification modules, which are the two critical components of a monitoring system for IIoT, with a generative model. The latter is responsible for imputing missing sensor measurements so that the monitoring system performance is robust to missing data. In particular, we adopt generative adversarial networks (GANs) to generate missing sensor measurements and we propose to fine-tune the training of the GAN based on the impact that the generated data have on the fault detection and classification modules. We conduct a thorough evaluation of the proposed approach using the extended Tennessee Eastman Process data set. Results show that the GAN-imputed data mitigate the impact on the fault detection and classification even in the case of persistently missing measurements from sensors that are critical for the correct functioning of the monitoring system.
6 April 2018 in IEEE Internet of Things Journal
Ultradense Internet of Things (IoT) mesh networks and machine-to-machine communications herald an enormous opportunity for new computing paradigms and are serving as a catalyst for profound change in the evolution of the Internet. The collective computation capability of these IoT devices is typically neglected in favor of cloud or edge processing. We propose a framework to tap into this resource pool by coupling data communication and processing. Raw data captured by sensing devices can be aggregated and transformed into appropriate actions as it travels along the network toward actuating nodes. This paper presents an element of this vision, whereby we map the operations of an artificial neural network onto the communication of a multihop IoT network for simultaneous data transfer and processing. By exploiting the principle of locality inherent to many IoT applications, the proposed approach can reduce the latency in delivering processed information. Furthermore, it improves the distribution of energy consumption across the IoT network compared to a centralized processing scenario, thus mitigating the “energy hole” effect and extending the overall lifetime of the system.
27 September 2018 in IEEE Systems Journal
Licensed shared access (LSA) is a spectrum sharing mechanism where bandwidth is shared between a primary network, called incumbent, and a secondary mobile network. In this paper, we address dynamic spectrum management mechanisms for LSA systems. We propose a fair spectrum management algorithm for distributing incumbent’s available spectrum among mobile networks. Then, we adapt the proposed algorithm to take mobile network operator’s regulatory compliance aspect into account and penalize the misbehaving network operators in spectrum allocation. We extend our results to the scenario where more than one incumbent offer spectrum to the mobile operators in a service area and propose various protocols, which ensure long term fair spectrum allocation within the individual LSA networks. Finally, we numerically evaluate the performance of the proposed spectrum allocation algorithms and compare them using various performance metrics. For the single incumbent case, the numerical results show that the spectrum allocation is fair when the mobile operators follow the spectrum access regulations. We demonstrate the effect of our proposed penalty functions on spectrum allocation when the operators do not comply with the regulatory aspects. For the multi-incumbent scenario, the results show a tradeoff between efficient spectrum allocation and flexibility in spectrum access for our proposed algorithms.
7 October 2021 in IEEE Transactions on Cognitive Communications and Networking
In this paper, we consider millimeter Wave (mmWave) technology to provide reliable wireless network service within factories where links may experience rapid and temporary fluctuations of the received signal power due to dynamic blockers, such as humans and robots, moving in the environment. We propose a novel beam recovery procedure that leverages Machine Learning (ML) tools to predict the starting and finishing of blockage events. This erases the delay introduced by current 5G New Radio (5G-NR) procedures when switching to an alternative serving base station and beam, and then re-establish the primary connection after the blocker has moved away. Firstly, we generate synthetic data using a detailed system-level simulator that integrates the most recent 3GPP 3D Indoor channel models and the geometric blockage Model-B. Then, we use the generated data to train offline a set of beam-specific Deep Neural Network (DNN) models that provide predictions about the beams’ blockage states. Finally, we deploy the DNN models online into the system-level simulator to evaluate the benefits of the proposed solution. Our prediction-based beam recovery procedure guarantees higher signal level stability and up to 82% data rate improvement with respect a detection-based method when blockers move at speed of 2 m/s.
1 May 2020 in IEEE Wireless Communications Letters
13 May 2013 in IEEE Journal on Selected Areas in Communications
This paper suggests that the regulatory tool known as the Block Edge Mask (BEM), which is used to define the technical conditions governing a spectrum license, can be used as an instrument to jointly drive spectrum and energy efficiency in a network. The paper explores this concept and goes on to show how networks can generate waveforms which comply with the energy limits of the BEM and at the same time make best use of the spectral resources available to them. The focus of the paper is on orthogonal frequency division multiplexing (OFDM) waveforms. The spectrum- and energy-efficient BEM-compliant waveforms are generated using a process that optimally combines symbol shaping and subcarrier-power loading to create a waveform that minimizes the difference between the transmitted wave and BEM. Practical considerations relating to peak-to-average-power-ratio (PAPR) reduction and time and frequency synchronization issues are explored to ensure the BEM-compliant waveforms can be transmitted with minimal changes to the transceiver. It is envisaged that these techniques will be used by transmitters that change their frequency of operation and in doing so need to shape their transmitted waveforms to comply with the different BEMs governing the use of the different spectrum blocks they wish to access.