1 September 2018 in International Journal of Hydrogen Energy
1 September 2018 in International Journal of Hydrogen Energy
1 October 2020 in International Journal of Hydrogen Energy
20 September 2018 in European Mechanical Science
In this study, change in brake power (BP) of a variable compression spark ignited engine was investigated with different spark plugs and hydrogen enrichment. The tests were carried out with a four stroke, single cylinder, naturally aspirated, variable compression ratio (VCR) engine. Two different compression ratios (CR) of 8.5:1 and 10:1 under %50 part throttle condition were implemented throughout the experiments. Moreover, engine loads of 8 Nm, 13 Nm and 17 Nm were applied to evaluate effects of different spark plugs and hydrogen usage at different engine loads. Copper, iridium and platinum spark plugs were tested for each experiment condition. In addition, hydrogen was added through the intake manifold with flow rates of 0, 2 and 4 lit/min to enhance combustion of VCR engine. According to test results, iridium and platinum spark plug usage, hydrogen addition and higher compression ratio improved BP significantly. This variance occurred more obvious with platinum spark plug usage comparing to iridium spark plug. In addition, effects of spark plug alteration, hydrogen addition and higher CR on enhancement of BP were comparatively lower at higher engine loads.
8 July 2023 in Scientia Iranica
In research automotive aerodynamics, it is not common to focus on a specific vehicle due to restricted access to the CAD geometries, their short life span, and limited validation data. For this reason, researchers prefer generic bodies that look like automobiles such as Ahmed Body in their investigations. However, the absence of moving ground and rotating wheels makes these generic bodies unrealistic for aerodynamic studies. In this context, including wheels in CFD simulations, varying ground and wheel boundary conditions, and comparing their qualitative and quantitative flow parameters with the original Ahmed Body experiment is the main objective of this paper. Results have shown that changing stationary ground and wheel boundaries into moving and rotating boundaries do have minor effects on wake characteristics and drag coefficients. However, just the presence of wheels on the model increases force coefficients significantly (increment in drag and lift coefficients by 27.32% and 188.5 counts, respectively.) even though these boundaries are stationary. As a result, the absence of moving ground and rotating wheels can be tolerated to some extent (especially for experimental studies in which inclusion of moving and rotating boundaries may have difficulties). However, a study cannot be evaluated exactly with a model without wheels.
1 August 2016 in Journal of Biotechnology