Milan N. Sovilj

Milan N. Sovilj

Auto-generated profile, based on publicly available information

Milan N. Sovilj

University of Novi Sad, Faculty of Technology, Novi Sad, Serbia

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2011 in Macedonian Journal of Chemistry and Chemical Engineering
Verified
Journal Article
Open access
PDF file
MSMilan N. Sovilj
Milan N. Sovilj
BNBranislava Nikolovski
Branislava Nikolovski
MSMomčilo Đ. Spasojević
Momčilo Đ. Spasojević
Supercritical fluid extraction (SFE) is one of the relatively new efficient separation method for the extraction of essential oils from different plant materials. The new products, extracts, can be used as a good base for the production of pharmaceutical drugs and additives in the perfume, cosmetic, and food industries. The aim of this work was to analyze the supercritical carbon dioxide extraction (SC-CO2) of oils from the selected spice plant materials. In this paper the process parameters such as pressure, temperature, solvent flow rate, size of grinding materials, and ratio of the co-solvent were presented for the selected spice plant materials: black pepper, caraway, celery, cinnamon, clove, coriander, daphne, fennel, ginger, hyssop, juniper, lavender, oregano, pennyroyal, red pepper, safflower, sage, turmeric, and vanilla. The values of operating conditions were: pressure from 7.5 to 68 MPa, temperature from 293 to 363 K, solvent flow rate from 0.003 to 30.0 kg/h, and diameter of grinding material from 0.17 to 3.90 mm. The global yield and quality of the extracts all of the plant material investigated, as well as the possibility of their application in the food, cosmetics and pharmaceutical industries were analyzed. The composition of the extracts was wery complex, and in every case the extract was composed of more than 200 components. All the compounds from the CO2 extracts were classified in the following groups: monoterpene, sesquiterpene, oxygenated monoterpene, and oxygenated sesquiterpene and other hydrocarbon groups. In some of the systems investigated the different mathematical models (Sovová, Hong), which have taken from the literature, were used to correlate the experimental data.

1 January 2010 in Acta Periodica Technologica
Verified
Journal Article
Open access
MSMilan Sovilj
Milan Sovilj
Supercritical carbon dioxide extraction, as a relatively new separation technique, can be used as a very efficient process in the production of essential oils and oleoresins from many of plant materials. The extracts from these materials are a good basis for the new pharmaceutical products and ingredients in the functional foods. This paper deals with supercritical carbon dioxide extraction of selected oil seeds which are of little interest in classical extraction in the food industry. In this article the process parameters in the supercritical carbon dioxide extraction, such as pressure, temperature, solvent flow rate, diameter of gound materials, and moisture of oil seed were presented for the following seeds: almond fruits, borage seed, corn germ, grape seed, evening primrose, hazelnut, linseed, pumpkin seed, walnut, and wheat germ. The values of investigated parameters in supercritical extraction were: pressure from 100 to 600 bar, temperature from 10 to 70oC, diameter of grinding material from 0.16 to 2.0 mm, solvent flow used from 0.06 to 30.0 kg/h, amount of oil in the feed from 10.0 to 74.0%, and moisture of oil seed from 1.1 to 7.5%. The yield and quality of the extracts of all the oil seeds as well as the possibility of their application in the pharmaceutical and food, industries were analyzed.

1 January 2019 in Acta Periodica Technologica
Verified
Journal Article
Open access
PDF file
MSMilan N. Sovilj
Milan N. Sovilj
BNBranislava G. Nikolovski
Branislava G. Nikolovski
MSMomčilo Đ. Spasojević
Momčilo Đ. Spasojević
SMSiniša M. Mauhar
Siniša M. Mauhar
This paper presents the results of the determination of the hydrodynamic characteristics and mass transfer in the pilot plate absorption column. The experimental values of the pressure drop in the countercurrent flow of air and water through the column were obtained. The graphic dependence of the pressure drop of air per unit height of the layer of packing (?P/h) on the apparent air velocity (Ug) through the dry charge was shown to be in the form of a quadratic function. From the graphical function which shows the dependence of the pressure drop per unit height of the layer of filling (?P/m) on the apparent air velocity during the countercurrent flow of the phases (water and air), three fields of the interaction of the phases were observed: a) the area of low load, at low apparent air velocities, b) the area of high load, at higher air velocities, and c) the flooding area, when the liquid completely fills the cavities and the working gas in them starts bubbling. The overall mass transfer coefficient (Kg) of the air-CO2-water system depends on the flow rate of the gaseous phase and the composition of the starting gas mixture (air-CO2). With the increase in the total gas flow rate, with a constant composition of the starting gas mixture and constant fluid flow, the overall mass transfer coefficient increases. Increasing the amount of CO2 in the starting gas mixture at a constant flow rate of fluid and a constant ratio of the molar flow of the inert in the liquid and the gas-phase (L'/G') decreases the overall mass transfer coefficient.

30 December 2019 in Macedonian Journal of Chemistry and Chemical Engineering
Verified
Journal Article
Open access
PDF file
MSMilan N. Sovilj
Milan N. Sovilj
BNBranislava Nikolovski
Branislava Nikolovski
MSMomčilo Đ. Spasojević
Momčilo Đ. Spasojević
This work provides a review of hydrodynamic characteristics such as the slip velocity, the dispersed-phase holdup, mean drop size, and axial dispersion of non-mechanically agitated liquid-liquid (L-L) extractors, with special reference to spray and packed bed columns. The complexity and importance of hydrodynamic behavior in designing and scaling up L-L extractors was a driving force to analyze, compare and discuss some important experimental findings available in the literature. The effects of phase velocities and the dispersed-phase holdup on the slip velocity, the mean drop size and the axial dispersion coefficient were studied and presented. Empirical correlations for slip velocity, the Sauter mean drop diameter and the axial dispersion coefficient, which were taken from the literature, were commented in terms of their applicability.

1 January 2012 in Acta Periodica Technologica
Verified
Journal Article
Open access
MSMilan Sovilj
Milan Sovilj
Although the non-agitated extraction columns (spray column, packed column, perforated plate column, sieve plate column, etc) can handle high flow rates and are simple and cheap, there have been relatively few applications of these columns because they suffer from serious backmixing of the continuous phase. It was shown that the backmixing is reduced when the spray column is operated with dense packing of drops. Another way of increasing the efficiency of a non-agitated extraction column is to introduce an inert gas (air, nitrogen, oxygen) as a mixing agent in the two-phase liquid-liquid (L-L) system. This method of energy introduction increases the turbulence within the new three-phase gas-liquid-liquid (G-L-L) system, which causes an improved dispersion of droplets, and, consequently, a higher dispersed phase holdup and therefore a great mass transfer area. The present study reports the hydrodynamics in the non-agitated extraction columns, as well as the axial dispersion for the two- and three-phase systems.

1 January 2011 in Acta Periodica Technologica
Verified
Journal Article
Open access
PDF file
BNBranislava Nikolovski
Branislava Nikolovski
JIJelena D. Ilić
Jelena D. Ilić
MSMilan N. Sovilj
Milan N. Sovilj
MNMilan P. Nikolić
Milan P. Nikolić
JMJadranka L. Milanović
Jadranka L. Milanović
The aim of this work was to contribute to the optimized production of water-in-oil emulsions with pumpkin seed oil in the oil phase using a high-speed homogenizer. Pumpkin seed oil is a valuable natural source of essential fatty acids and biologically active micronutrients that contribute to its nutritive value and medical uses, and reduce interfacial tension between water and the oil phases. Therefore, pumpkin seed oil can be considered as a prosperous oil phase whose use can possibly decrease the amount of some emulsifier that is normally involved in every emulsification process. A central composite rotatable experimental design was implemented to analyze the impact of the contents of polyglycerol polyricinoleate and pumpkin seed oil in the continuous phase, as well as water phase content in the emulsion on droplet size distribution and the response surface methodology was used to obtain optimal conditions for water-in-oil emulsion preparation. Mean size diameter of water droplets was in a range from 400 to 850 nm, with mean peak width of 100 to 220 nm, respectively. The influence of all three investigated factors on the emulsification was determined. Additionally, the emulsions prepared with pumpkin seed oil showed a higher stability during the storage time compared to the emulsions with sunflower oil.