24 April 2017 in Water Resources Research
19 November 2018 in Water Resources Research
Fluvial dikes (i.e., levees) can be damaged by overtopping flows, leading to breach formation and severe floods. Accurate prediction of the breach geometry and outflow hydrograph is crucial to achieve sound inundation risk assessment and mitigating measures. A set of laboratory experiments were performed to study overtopping induced fluvial dike breaching. The effects of floodplain tailwater on the breach expansion and outflow were investigated. Results are compared to previous experiments under different main channel inflow discharges combined with a free floodplain. The dike breaching process follows three stages: gradual start of overtopping and slow initiation of dike erosion, fast deepening and widening of the breach with highly transient flows, and flow quasi‐stabilization with or without sustained breach expansion. Using the recorded data, a simplified regression model relating the breach stabilization time and the final breach width to the floodplain confinement and inflow Froude number in the main channel is proposed.
28 September 2020 in Water Resources Research
A nonintrusive, high‐resolution laser profilometry technique (LPT) has been developed for continuous monitoring of the three‐dimensional (3‐D) evolving breach in laboratory models of noncohesive fluvial dikes. This simple and low‐cost setup consists of a commercial digital video camera and a sweeping red diode 30 mW laser projecting a sheet over the dike. The 2‐D image coordinates of each deformed laser profile incident on the dike are transformed into 3‐D object coordinates using the direct linear transformation (DLT) algorithm. All 3‐D object coordinates computed over a laser sweeping cycle are merged to generate a cloud of points describing the instantaneous surface. The DLT‐based image processing algorithm uses control points and reference axes, so that no prior knowledge is needed on the position, orientation, and intrinsic characteristics of the camera, nor on the laser position. Because the dike is partially submerged, ad hoc refraction correction has been developed. Algorithms and instructions for the implementation of the LPT are provided. Reconstructions of a dike geometry with the LPT and with a commercial laser scanner are compared in dry conditions. Using rigid dike geometries, the repeatability of the measurements, the refraction correction, and the dike reconstruction have been evaluated for submerged conditions. Two laboratory studies of evolving fluvial dike breaching due to flow overtopping have been conducted to demonstrate the LPT capabilities and accuracy. The LPT has advantages in terms of flexibility and spatiotemporal resolution, but high turbidity and water surface waves may lead to inaccurate geometry reconstructions.
13 May 2019 in Scientific Data
KAKamal El Kadi Abderrezzak
Kamal El Kadi Abderrezzak
+1
This paper presents a dataset obtained from fifty four laboratory experiments of the breaching of fluvial dikes due to flow overtopping. Data were collected on two complementary experimental setups, each consisting of a main channel representing the river, an erodible lateral dike and a floodplain. The dataset covers seven test series, involving varying hydraulic boundary conditions (e.g. inflow discharge, downstream boundary conditions), main channel dimensions, as well as bottom and dike material. The following experimental data were produced: time series of water levels in the main channel, time series of flow discharges in the main channel and through the breach, as well as high resolution 3D reconstructions of the breach geometry during its expansion. The latter measurements were performed using a novel non-intrusive laser profilometry technique developed for this research. Reuse of the collected data will support efforts to improve our understanding of the physical processes underpinning fluvial dike breaching. It will also enable benchmarking the accuracy of conceptual or detailed numerical models for the prediction of dike breaching, which is central to flood risk management.
17 February 2020 in Journal of Hydraulic Research
Flow overtopping can lead to the initiation of breaching and failure of fluvial dikes, causing severe inundations and damage in the protected areas. For flood risk management and prevention, the accurate estimate of flow discharge across the fluvial dike breach is paramount, requiring precise understanding of the breach expansion. Laboratory experiments were conducted to analyse the effects of fine sand, inducing apparent cohesion in the dike material, on breach development and outflow. Tests were conducted under controlled inflow discharge and dike material composed of either homogeneous non-cohesive coarse sand or heterogeneous fine sand/coarse sand mixtures. Based on the non-intrusive laser profilometry technique, high temporal and spatial resolution of the three-dimensional breach geometry evolution was measured, indicating a small effect of the fine material on the overall breach dynamics. A detailed analysis revealed, however, that fine sand induces less frequent slope collapses but larger sliding/failing lumps compared to homogenous non-cohesive coarse sand.