4 December 2018 in Periodica Polytechnica Mechanical Engineering
Issues of technological processes’ intensification and increase of technological equipment efficiency are of priority value in the modern engineering. Application of various methods of hydrodynamic drag on the working fluids in rotary-wheel machines allows increasing of processing efficiency to receive finely-dispersed homogeneous mixtures with necessary characteristics. In this article the issues, connected with the liquid flows' formation in the working zone of rotary-cavitating activator are studied and the main principles of energy impact while the usage of rotor with radial channels, supplied with the elements for receiving cavitating effects, are defined. Based on the offered methodology, experimental research was conducted and calculations of the main indexes, defining efficiency of energy impact on the working medium, were held. The substantiated estimation of efficiency of hydrodynamic machines work according to the dissipative power that allows to choose the proportion of hydrodynamic settings, which provide the highest intensity of cavitating processing of processed liquids, was presented. The practical value of the research is in the studying of ways of increasing of equipment efficiency through the possibility of technological process intensification.
25 June 2018 in Periodica Polytechnica Mechanical Engineering
In this article a hardware estimation procedure and optimization of parameters of working fluid cavitation processing are proposed. Here the basic aspects of preparation efficiency and using of water-fuel emulsion are reviewed. An example of estimation of energy parameters of hydrodynamic activator operation in obtaining water-fuel emulsion is supplied.
28 July 2022 in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
The issues of finishing operations of machining and providing a reasonable choice of optimal options, taking into account the distribution between the removal of material by the tool and the friction of the ligament at the contact. At the same time it is necessary to ensure the greatest possible protrusion of the tops of the grains above the level of ligament of the circle, as well as the timely removal of blunt grains from the working surface of the circle. The use of tools with increased physical and mechanical capabilities for processing with exfoliation of the surface layer of the workpiece is proposed. The essence of the process is that it concentrates all the removal of material on a narrow contact length, while providing maximum speed with the lowest specific grinding energy. When grinding by exfoliation in the area of removal of the removal allowance is an order of magnitude higher than when conventional grinding. The contribution of friction and plowing energy becomes a small part of the total specific energy of grinding. The heat released during grinding is reduced, its dissipation conditions in the process of spot grinding are improved. These studies allow us to understand the physical essence of the process, to determine the modes of processing, as well as ways to optimize the technological parameters of spot grinding