26 February 2021 in IEEE Robotics and Automation Letters
We developed and validated a gait phase estimator for real-time control of a robotic hip exoskeleton during multimodal locomotion. Gait phase describes the fraction of time passed since the previous gait event, such as heel strike, and is a promising framework for appropriately applying exoskeleton assistance during cyclic tasks. A conventional method utilizes a mechanical sensor to detect a gait event and uses the time since the last gait event to linearly interpolate the current gait phase. While this approach may work well for constant treadmill walking, it shows poor performance when translated to overground situations where the user may change walking speed and locomotion modes dynamically. To tackle these challenges, we utilized a convolutional neural network-based gait phase estimator that can adapt to different locomotion mode settings to modulate the exoskeleton assistance. Our resulting model accurately predicted the gait phase during multimodal locomotion without any additional information about the user's locomotion mode, with a gait phase estimation RMSE of 5.04 ± 0.79%, significantly outperforming the literature standard (p <; 0.05). Our study highlights the promise of translating exoskeleton technology to more realistic settings where the user can naturally and seamlessly navigate through different terrain settings.
24 December 2019 in IEEE Transactions on Medical Robotics and Bionics
Lower limb exoskeletons provide assistance during the gait cycle using a state variable, one in particular is gait phase. This is crucial for the exoskeleton controller to provide the user accurate assistance. Conventional methods often utilize an event marker to estimate gait phase by computing the average stride time. However, this strategy has limitations in adapting to dynamic speeds. We developed a sensor fusion-based neural network model to estimate the gait phase in real-time that can adapt to dynamic speeds ranging from 0.6 to 1.1 m/s. Ten able-bodied subjects walked with an exoskeleton using our estimator and were provided with corresponding torque assistance. Our best performing model had RMSE below 29 ms and 4% for real-time estimation and torque generation, respectively, reducing the estimation error by 36.0% (p < 0.01) and torque error by 40.9% (p < 0.001) compared to conventional methods. Our results indicate that creating a general user-independent model and additionally training on user-specific data outperforms the user-specific model and user-independent model. Our study validates the feasibility of using a sensor fusion-based machine learning model to accurately estimate the user’s gait phase and improve the controllability of a lower limb exoskeleton.
9 December 2019 in Military Medicine
Introduction: Powered prostheses are a promising new technology that may help people with lower-limb loss improve their ability to perform locomotion tasks. Developing active prostheses requires robust design methodologies and intelligent controllers to appropriately provide assistance to the user for varied tasks in different environments. The purpose of this study was to validate an impedance control strategy for a powered knee and ankle prosthesis using an embedded sensor suite of encoders and a six-axis load cell that would aid an individual in performing common locomotion tasks, such as level walking and ascending/descending slopes. Materials and Methods: Three amputees walked on a treadmill and four amputees walked on a ramp circuit to test whether a dual powered knee and ankle prosthesis could generate appropriate device joint kinematics across users. Results: Investigators found that tuning 2–3 subject-specific parameters per ambulation mode was necessary to render individualized assistance. Furthermore, the kinematic profiles demonstrate invariance to walking speeds ranging from 0.63 to 1.07 m/s and incline/decline angles ranging from 7.8° to 14°. Conclusion: This work presents a strategy that requires minimal tuning for a powered knee & ankle prosthesis that scales across a nominal range of both walking speeds and ramp slopes.
4 August 2025 in IEEE Transactions on Robotics
Robotic exoskeletons can transform mobility for individuals with lower limb disabilities. However, their widespread adoption is limited by controller degradation caused by varying gait dynamics across different users and environments. Here, we propose an online adaptation framework that leverages real-time data streams to continuously update the user state estimator model. This approach allows the exoskeleton to learn the user-specific gait patterns, effectively customizing the model for each new user. In addition, we demonstrate a sensor signal transformation technique that enables model transfer across different exoskeleton hardware (from a research-grade exoskeleton to a commercial device). With less than one minute of adaptation, our framework improved gait phase estimation, which directly affects assistance timing, by 40.9% for able-bodied subjects and 65.9% for stroke survivors ($p$ $< $ 0.05), and reduced torque profile error by 32.7% compared to the baseline model ($p$ $< $ 0.05). Furthermore, in a pilot test, we applied our adaptation framework with human-in-the-loop optimization for control tuning. In a single stroke survivor, this approach led to a 21.8% increase in walking speed and a 6.5% reduction in metabolic cost compared to walking without exoskeleton. While preliminary, these results suggest the potential for personalized exoskeleton assistance in clinical populations.