2 June 2018 in The International Journal of Advanced Manufacturing Technology
The hybrid metal extrusion and bonding (HYB) process is a new solid-state joining technique developed for aluminum alloys. By the use of filler material addition and plastic deformation sound joints can be produced at operating temperatures below 400 °C. The HYB process has the potential to compete with commonplace welding technologies, but its comparative advantages have not yet been fully explored. Here, we present for the first time the results from an exploratory investigation of the mechanical integrity of a 4-mm AA6082-T6 HYB joint, covering both hardness, tensile and Charpy V-notch testing. The joint is found to be free from defects like pores, internal cavities and kissing bonds, yet a soft heat-affected zone (HAZ) is still present. The joint yield strength is 54% of that of the base material, while the corresponding joint efficiency is 66%. The indications are that the HYB process may compete or even outperform conventional welding techniques for aluminum in the future after it has been fully developed and optimized.
1 March 2021 in Materials Science and Engineering: A
1 January 2019 in Procedia Structural Integrity
4 February 2019 in Material Design & Processing Communications
The hybrid metal extrusion & bonding (HYB) process is a patented solid‐state joining method for metals. Over the years it has evolved into a multi‐functional joining process handling a wide range of joint configurations (butt, fillet and slot welds) and base metal combinations (Al, Fe, Ti and Cu). At present, up to four different metals can be joined together in one pass using the HYB PinPoint extruder and AA6082 as filler wire.
21 February 2019 in Material Design & Processing Communication
In aluminium‐steel welding bonding occurs via intermetallic compound (IMC) formation. Therefore, the reaction layer thickness X is a key parameter controlling the bond strength. To enable prediction of the layer thickness in a real welding situation, a simple diffusion model has been developed. The model, which is isokinetic in nature, allows X to be calculated via the Scheil integral from knowledge of the weld thermal cycle. Its relevance to solid state butt welding of aluminium to steel is illustrated in two different case studies, representing best practice for friction stir welding (FSW) and hybrid metal extrusion & bonding (HYB), respectively.
1 January 2019 in Procedia Structural Integrity