Traditional imaging systems exhibit a well-known trade-off between the resolution and the field of view of their captured images. Typical cameras and microscopes can either “zoom in” and image at high-resolution, or they can “zoom out” to see a larger area at lower resolution, but can rarely achieve both effects simultaneously. In this review, we present details about a relatively new procedure termed Fourier ptychography (FP), which addresses the above trade-off to produce gigapixel-scale images without requiring any moving parts. To accomplish this, FP captures multiple low-resolution, large field-of-view images and computationally combines them in the Fourier domain into a high-resolution, large field-of-view result. Here, we present details about the various implementations of FP and highlight its demonstrated advantages to date, such as aberration recovery, phase imaging, and 3D tomographic reconstruction, to name a few. After providing some basics about FP, we list important details for successful experimental implementation, discuss its relationship with other computational imaging techniques, and point to the latest advances in the field while highlighting persisting challenges.
Extreme ultraviolet microscopy and wavefront sensing are key elements for next-generation ultrafast applications, such as chemically-resolved imaging, focal spot diagnostics in pump-and-probe experiments, and actinic metrology for the state-of-the-art lithography node at 13.5 nm wavelength. Ptychography offers a robust solution to the aforementioned challenges. Originally adapted by the electron and synchrotron communities, advances in the stability and brightness of high-harmonic tabletop sources have enabled the transfer of ptychography to the laboratory. This review covers the state of the art in tabletop ptychography with high harmonic generation sources. We consider hardware options such as illumination optics and detector concepts as well as algorithmic aspects in the analysis of multispectral ptychography data. Finally, we review technological application cases such as multispectral wavefront sensing, attosecond pulse characterization, and depth-resolved imaging.
An autofocusing algorithm for ptychography is proposed. The method optimizes a sharpness metric that would be observed in a differential interference microscope and is valid for both amplitude and phase modulating specimens. We experimentally demonstrate that the algorithm, based on the extended ptychographic iterative engine (ePIE), calibrates the sample–detector distance with an accuracy within the depth of field of the ptychographic microscope. We show that the method can be used to determine slice separation in multislice ptychography, provided there are isolated regions on each slice of the specimen that do not axially overlap.
Diffractive optics can be used to accurately control optical wavefronts, even in situations where refractive components such as lenses are not available. For instance, conventional Fresnel zone plates (ZPs) enable focusing of monochromatic radiation. However, they lead to strong chromatic aberrations in multicolor operation. In this work, we propose the concept of spatial entropy minimization as a computational design principle for both mono- and polychromatic focusing optics. We show that spatial entropy minimization yields conventional ZPs for monochromatic radiation. For polychromatic radiation, we observe a previously unexplored class of diffractive optical elements, allowing for balanced spectral efficiency. We apply the proposed approach to the design of a binary ZP, tailored to multispectral focusing of extreme ultraviolet (EUV) radiation from a high-harmonic tabletop source. The polychromatic focusing properties of these ZPs are experimentally confirmed using ptychography. This work provides a new route towards polychromatic wavefront engineering at EUV and soft-x-ray wavelengths.
Conventional (CP) and Fourier (FP) ptychography have emerged as versatile quantitative phase imaging techniques. While the main application cases for each technique are different, namely lens-less short wavelength imaging for CP and lens-based visible light imaging for FP, both methods share a common algorithmic ground. CP and FP have in part independently evolved to include experimentally robust forward models and inversion techniques. This separation has resulted in a plethora of algorithmic extensions, some of which have not crossed the boundary from one modality to the other. Here, we present an open source, cross-platform software, called PtyLab, enabling both CP and FP data analysis in a unified framework. With this framework, we aim to facilitate and accelerate cross-pollination between the two techniques. Moreover, the availability in Matlab, Python, and Julia will set a low barrier to enter each field.
Coherent multi-spectral extreme ultraviolet beams have great potential for providing high spatial and temporal resolution for microscopy and spectroscopy applications. But due to the limitations of short-wavelength optics and the broad bandwidth, it remains a challenge to perform quantitative, high-resolution beam characterization. Here we present a wavefront sensing solution based on multiplexed ptychography, with which we show spectrally resolved, high-resolution beam reconstructions. Furthermore, using these high-fidelity quantitative wavefront measurements, we investigate aberration transfer mechanisms in the high-harmonic-generation process, where we present and explain harmonic-order-dependent astigmatism inheritance from the fundamental wavefront. This ptychographic wavefront sensing concept thus enables detailed studies of the high-harmonic-generation process, such as spatiotemporal effects in attosecond pulse formation.