29 January 2019 in IET Microwaves, Antennas & Propagation
This study presents a new slitted electromagnetic bandgap (EBG) structure to filter undesired wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) bands in the ultra‐wideband (UWB) spectrum. A simple UWB antenna which consists of a microstrip tapered feed line, a circular patch and a defected ground structure is used as a reference antenna. The antenna is then integrated with a slitted EBG structure near the feed line to notch two interfering bands. The created notched bands by the EBG structure can be independently controlled. Owing to structural symmetry of the proposed antenna, the size can be reduced by approximately half to form a miniaturised antenna. The miniaturised antenna has the same full‐size antenna characteristics with little change in the notched bands specifications. Frequency domain measurement results show that the full‐size and miniaturised antennas have a flat transfer function, and a group delay variation of about 0.5 ns in the entire UWB band except for the notched bands.
1 January 2015 in IET Microwaves, Antennas & Propagation
In this study, a compact ultra‐wideband (UWB) bandpass filter (BPF) with sharp roll‐off, improved out‐of‐band performance and dual‐band‐notch operation is presented and its design procedure is discussed. In the proposed structure, in order to reject the unwanted harmonic pass bands, a pair of modified cross‐shaped coupled lines (CCLs) is implemented along the ports of the filter. Moreover, a pair of half‐circle‐shaped stubs and a stepped‐impedance stub are loaded on the main resonator in order to obtain additional transmission zeros (TZs) which are controllable separately. Implementation of the CCLs and the stub loaded resonator (SLR) reduce the total size of the presented microstrip BPF. Besides, by extending and folding the upper coupled line of each CCLs and also through an open stub which is protruded inside a slot on the main resonator, dual‐band‐notch operation is added to the performance of the presented filter. The fabricated prototype has a small size and is capable to cover frequency band of 2.8–10.69 GHz with two band‐notch functions at 4.9–5.4 and 7.83–8.25 GHz which suppresses the interference between UWB spectrum with wireless local area network (WLAN) and satellite communication frequency bands, respectively. The proposed filter has a compact size while showing good return loss and insertion loss characteristic in the frequency band of interest.
8 June 2018 in IEEE Antennas and Wireless Propagation Letters
An enhanced reflectarray (RA) antenna built of elements with reduced reflection phase sensitivity is presented. The proposed unit element is composed of a concentric, multi-resonance circular-ring structure with variable sizes. By changing the outer and inner radius of the interior ring in the opposite directions, a reduction in the phase sensitivity without dedicating to the 360° phase range and aggravating the losses in the unit element is achieved. Thus, this has given a good manufacturing tolerance with a high-efficiency wideband performance. Measurement results show the maximum gain of 26.4 dBi at 10 GHz, aperture efficiency of 44.27%, and 16.3% 1dB gain bandwidth. In order to improve the bandwidth of antenna, the phase constant ($\phi_{\circ}$) value at the RA aperture is gradually tuned and optimized. The designed antenna with $\phi_{\circ}$=-125° has a peak gain 26.6 dBi at 10.2 GHz, aperture efficiency of 44.56%, and the 1dB gain bandwidth is about 23.3% (9.67-12 GHz). In comparison with the conventional antenna ($\phi_{\circ}$=0°), the 1 dB bandwidth shows a 43% improvement.
1 January 2015 in IET Microwaves, Antennas & Propagation
The procedure of attaining a compact bandpass filter (BPF) with dual band‐notch function for ultra‐wideband (UWB) applications is presented and discussed. In the proposed BPF, defected ground structure is used in order to improve the out‐of‐band performance of the filter. Also, four short‐circuited bent stubs are employed in order to improve the selectivity of the filter at its cutoff frequencies. Dual band‐notch function is added to the performance of the filter by coupling two short‐circuited inverted T‐shaped stubs to the filter main resonator. The fabricated filter satisfies well the demands of the Federal Communications Committee with two narrow band‐notch functions at 5.5 and 8 GHz, which eliminates the interference of the UWB system with wireless local area network (WLAN) and satellite communication systems, respectively. The improved upper stop‐band of the proposed filter with more than 20 dB attenuation level extends up to 20 GHz.
1 May 2018 in AEU - International Journal of Electronics and Communications
18 November 2014 in Microwave and Optical Technology Letters