Department of Environmental Engineering and Green Technology (EGT), Malaysia Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan, Sultan Yahya Petra
Auto-generated profile, based on publicly available information
Shaza Eva Mohamad
Department of Environmental Engineering and Green Technology (EGT), Malaysia Japan International Institute of Technology (MJIIT), Universiti Teknologi Malaysia, Jalan, Sultan Yahya Petra
High amount of turbidity was identified as one of the important factor affecting the successful cultivation of microalgae in palm oil mill effluent (POME). In this study, Chlorella sorokiniana was cultivated in POME, under different dilutions of 80, 60, 40 and 20% (v/v) with distilled water. The aim of the study is to investigate the effect of POME turbidity and the dilutions on the specific growth rate of microalgae. The results found that, C. sorokiniana grew on both sterilized and unsterilized condition. The result of the batch experiment showed that, POME turbidity of 45 NTU produce the maximum specific growth rate by C. sorokiniana of 0.14 d-1, which correspond to biomass production of 4.06 g/L and 0.2 d-1, which correspond to biomass production of 5.94 g/L in sterilized and unsterilized POME respectively. The POME of high turbidity concentration of 98 NTU yield only 0.07 d-1 maximum specific growth rate of algae. Results of this study identified 80% dilution as the optimal medium that can enhance maximum biomass production in POME. This could be useful in reducing the cost of bioenergy generation
24 June 2025 in International Journal of Renewable Energy Development
The increasing demand for renewable energy and sustainable waste management has prompted research into innovative conversion technologies. This study explored the co-pyrolysis of Gracilaria waste (GW) and waste tires (WT) as a potential approach to improving bio-oil quality by enhancing its hydrocarbon content and reducing oxygenated compounds. The novelty of this study lay in providing new mechanistic insights into the co-pyrolysis process by systematically analyzing the thermal degradation behavior and chemical bond evolution of GW-WT mixtures using a combination of TGA, FTIR, and GC-MS techniques. This detailed chemical transformation analysis differentiated the study from prior research that primarily focused on product yields. The study analyzed the thermal degradation behavior and chemical bond transformation of GW and WT mixtures during pyrolysis, hypothesizing that the addition of WT to GW would enhance the hydrocarbon profile and thermal stability of the resulting bio-oil. Thermogravimetric analysis (TGA) was employed to evaluate the decomposition behavior of five different GW-WT blend ratios under an inert atmosphere, while Fourier Transform Infrared Spectrosco py (FTIR) was used to assess chemical functional group evolution in both raw materials and pyrolytic products. The results revealed that GW pyrolysis exhibited a single weight loss peak (100–350°C) with a total weight loss of 40%, while WT pyrolysis followed a two-stage decomposition process (200–500°C) with a total weight loss of 65%. The GW-WT mixture resulted in a total weight loss of approximately 60%, indicating a synergistic effect between the two feedstocks. FTIR analysis confirmed a reduction in hydroxyl (-OH) groups and an increase in hydrocarbon-related bonds (C=C, C-C, and C-H), demonstrating improved bio-oil composition. These findings suggested that incorporating waste tires into Gracilaria pyrolysis enhanced bio-oil quality and hydrocarbon content, offering a promising approach for biomass valorization and sustainable energy production. Future research should explore process optimization through catalyst integration and scale-up potential for industrial applications.
25 January 2022 in Journal of Advanced Research in Applied Sciences and Engineering Technology
E-cigarette has been marketed over years as one of alternative smoking cessation aid offered for consumer worldwide. The addition of flavouring in e-liquid has become a major factor that contributes to the appeal of using e-cigarette among a non-smoker and youngster has raised concerns due to possible risk and hazard outcomes in daily usage is remain unclear to date. In order to fully understand the e-cigarette attributes towards human health and environment; 17 e-liquid products locally sold were bought and analysed by gas chromatography-mass spectrometer (GC-MS) in order to determine the chemical constituent of e-liquid, especially the flavouring additive. A total of 19 out of 41 identified chemical compounds were detected as a new flavouring agent used in e-liquid products since there was no previous report on this. Many of the flavour chemicals possessed a risk of inhalation toxicity because they were classified as corrosive and/or irritant, with only a few having acute toxicity and the potential to cause cancer. Moreover, several chemical compounds to be concerned such as stimulant as well as opioid types were unexpectedly identified in the e-liquid. Thus, this finding indicate that the chemical constituent of e-liquid contained unknown risk of toxicity and further research is needed to fully understand the possibility of adverse effect in using e-cigarette.
Chronic wounds frequently develop eschar, a dense layer of necrotic tissue that impedes healing and fosters bacterial biofilm formation. Biofilms, protected within an extracellular polymeric substance, show high resistance to antimicrobial agents, making wound management challenging. Conventional surgical debridement, though effective, is invasive, painful, and damages healthy tissue. Enzymatic debridement using proteolytic enzymes provides a less invasive, selective alternative. This review summarizes advances in protease-based therapies from plant, bacterial, and recombinant sources, focusing on their dual role in degrading eschar proteins and disrupting biofilm architecture. By elucidating the mechanisms through which proteases hydrolyze structural proteins and dismantle biofilms, we highlight their potential as minimally invasive interventions that enhance healing, reduce infection, and improve patient outcomes.