4 April 2022 in European Transport Research Review
Background: The imminent emergence of connected and autonomous vehicles (CAVs) highlights the need for preparing the road infrastructure for traffic flows mixed with CAVs and human-driven vehicles. A dedicated lane (DL) for CAVs is one of the practical and potential ways to upgrade the road infrastructure for the mixed traffic. Methods: This paper proposes a theoretical method to discuss the influence of implementing a CAV DL policy on the freeway traffic efficiency. In detail, the impact was measured by capacity and throughput. The calculation methods of these efficiency measurements under different CAV DL policies were proposed. Experiments: Numerical experiments were conducted under various compositions of CAV DL policies and traffic conditions. More specifically, the relationship between the traffic conditions (i.e., traffic demand, market penetration rate (MPR) of CAVs, platoon intensity of CAVs, willingness of CAVs using the CAV DL) and the CAV DL policies (i.e., lane configuration, DL access control policy) were discussed. Results and Conclusion: The results have led to some interesting findings, including the critical values of MPR that are valuable to guide an appropriate implementation of a CAV DL policy under a specific traffic condition.
13 June 2020 in Journal of Advanced Transportation
Connected and autonomous vehicles (CAVs) are on the way to the field application. In the beginning stage, there will be a mixed traffic flow, containing the regular human-driven vehicles and CAVs with a low penetration rate. Recently, the discussion about the impact of a small proportion of CAVs in the mixed traffic is controversial. This paper investigated the possibility of applying the limited data from these lowly penetrated CAVs to estimate the average freeway link speeds based on the Kalman filtering (KF) method. First, this paper established a VISSIM-based microsimulation model to mimic the mixed traffic with different CAV penetration rates. The characteristics of this mixed traffic were then discussed based on the simulation data, including the sample size distribution, data-missing rate, speed difference, and fundamental diagram. Accordingly, the traditional KF-based method was introduced and modified to adapt data from CAVs. Finally, the evaluations of the estimation accuracy and the sensitive analysis of the proposed method were conducted. The results revealed the possibility and applicability of link speed estimation using data from a small proportion of CAVs.
16 March 2015 in Journal of Intelligent Transportation Systems
Traffic speed estimation is a fundamental task for traffic management centers and a critical element of intelligent transportation systems. For this purpose, various sensors are used to collect traffic speed information. The cellular probe system is gaining market penetration and becomes a newly effective and practical traffic speed measurement technique. In this article, the handoff system, one type of cellular probe technology, is used for speed detection. However, the handoff coverage size is usually variable and consecutive handoff points are usually far apart on a freeway. To improve the accuracy of speed estimation, this article proposes a travel-time-based method to aggregate the estimation results of the cellular probe system and loop detectors. For the purpose of a rigorous analysis, data are generated from microscopic simulation models of virtual one-direction freeway segments under various traffic conditions. Thus, the correlations between estimation accuracy and handoff distance, traffic condition, and the number of loop detectors are evaluated and analyzed. The results show that best performance is achieved with the shortest handoff distance. The aggregation of estimated speeds from cellular probe system and loop detectors can improve the speed estimation accuracy by taking advantage of each sensor if the space of loop detectors is more than 500 m. Also, an increasing number of loop detectors will improve the accuracy. Furthermore, the improvement of integration accuracy is much better under free flow conditions than under congested conditions.
1 January 2016 in Journal of Sensors
Freeway traffic state information from multiple sources provides sufficient support to the traffic surveillance but also brings challenges. This paper made an investigation into the fusion of a new data combination from cellular handoff probe system and microwave sensors. And a fusion method based on the neural network technique was proposed. To identify the factors influencing the accuracy of fusion results, we analyzed the sensitivity of those factors by changing the inputs of neural-network-based fusion model. The results showed that handoff link length and sample size were identified as the most influential parameters to the precision of fusion. Then, the effectiveness and capability of proposed fusion method under various traffic conditions were evaluated. And a comparative analysis between the proposed method and other fusion approaches was conducted. The results of simulation test and evaluation showed that the fusion method could complement the drawback of each collection method, improve the overall estimation accuracy, adapt to the variable traffic condition (free flow or incident state), suit the fusion of data from cellphone probes and fixed sensors, and outperform other fusion methods.
1 January 2018 in Wireless Communications and Mobile Computing
Variable techniques have been used to collect traffic data and estimate traffic conditions. In most cases, more than one technology is available. A legitimate need for research and application is how to use the heterogeneous data from multiple sources and provide reliable and consistent results. This paper aims to integrate the traffic features extracted from the wireless communication records and the measurements from the microwave sensors for the state estimation. A state‐space model and a Progressive Extended Kalman Filter (PEKF) method are proposed. The results from the field test exhibit that the proposed method efficiently fuses the heterogeneous multisource data and adaptively tracks the variation of traffic conditions. The proposed method is satisfactory and promising for future development and implementation.