27 April 2018 in IEEE Transactions on Electron Devices
We fabricate, characterize, and establish the critical design criteria of Hf 0.5 Zr 0.5 O 2 (HZO)-based ferroelectric field effect transistor (FeFET) for nonvolatile memory application. We quantify VTH shift from electron (hole) trapping in the vicinity of ferroelectric (FE)/interlayer (IL) interface, induced by erase (program) pulse, and VTH shift from polarization switching to determine true memory window (MW). The devices exhibit extrapolated retention up to 10 years at 85 °C and endurance up to 5 × 10 6 cycles initiated by the IL breakdown. Endurance up to 10 12 cycles of partial polarization switching is shown in metal-FE-metal capacitor, in the absence of IL. A comprehensive metal- FE-insulator-semiconductor FeFET model is developed to quantify the electric field distribution in the gate-stack, and an IL design guideline is established to markedly enhance MW, retention characteristics, and cycling endurance.
1 June 2012 in Journal of Applied Physics
The experimental characterization of the surface impedance of monolayer graphene at micro and millimeter wave frequencies is addressed. Monolayer graphene is transferred on a substrate stack, which is placed in the cross-section of a rectangular waveguide. In the fundamental mode, this setup is equivalent to a TE-polarized plane wave impinging under oblique incidence on an infinite graphene sheet, and similarly, the surface impedance of the graphene is a simple lumped element in a transmission-line model, that exactly represents the electromagnetic problem under study. Using this model, we propose a technique based on transmission matrices to accurately extract the surface impedance. The method is able to relax the influence of the substrates tolerances by taking advantage of the graphene infinitesimally small electrical thickness. It can also account for any gap between the sample and the test waveguide, thereby allowing to disregard graphene-metal contact resistance issues. The approach has been successfully applied to characterize graphene samples at X and bands. The extracted surface impedances fit the Drude conductivity model in the absence of interband transitions, and provides a wideband frequency independent resistance (in the range of KΩs) and a weak inductive behavior (in the range of pHs).
11 December 2017 in IEEE Electron Device Letters
To reduce the power consumption in scaled CMOS integrated circuits, transistors operating at low supply voltage with steep subthreshold swing (SS) are highly desirable. The negative capacitance (NC) effect in ferroelectric materials has emerged as a possible solution for achieving steep SS in transistors. In order to effectively leverage this effect in device applications, a proper understanding of its time-dependent nature is crucial. Here, we demonstrate that the NC effect occurs within a time window which is bounded by the switching time of ferroelectric domains at the faster time limit and screening charge compensation time of polarization at the slower time limit. We study this temporal dynamics of NC effect both by performing the transient measurements of Metal-Ferroelectric Hafnium Zirconium oxide-Insulator-Semiconductor (MFIS) capacitor connected in series with a load resistor and by characterizing negative capacitance field effect transistors (NCFET) at different timescales. Our experimental results provide deeper insight into the understanding of NC effect, reveal the time dependent switching nature of NCFETs and pave way for the advancement of steep slope transistors technology.
2 January 2015 in ACS Nano
LBLaurent Syavoch Bernard
1 January 2014 in IEEE Transactions on Nanotechnology
JPJulien Perruisseau-Carrier
Julien Perruisseau-Carrier
The RF performance of a nanoelectromechanical systems (NEMS) capacitive switch based on graphene is evaluated. Our results show that graphene can be a good candidate for the membrane of RF NEMS switches in applications where low actuation voltage and fast switching are required. The conductivity of the membrane is accurately modeled in the up- and down-state positions of the switch by considering the field effect of graphene. Rigorous full-wave simulations are then performed to obtain the scattering parameters of the switch. It is shown that graphene's conductivity variation due to electric field effect has a limited yet beneficial impact on the performance of the switch. It is also demonstrated that while monolayer graphene results in quite high switch losses at high frequency, the use of multilayer graphene, can considerably reduce the switch losses and improve the RF performance. Finally, an equivalent circuit model for the graphene-based RF NEMS switch is extracted and the results are compared with the full-wave 3-D electromagnetic simulation. These results motivate further efforts in the fabrication and characterization of graphene RF NEMS.