31 May 2023 in IEEE Transactions on Instrumentation and Measurement
When the power transformer is connected to the power grid, a surge of inrush current may occur as a result of residual flux. In order to mitigate this effect, measurement of residual flux is necessary. In this paper, a method for measuring the residual flux of ferromagnets was proposed, utilizing magnetic sensors and a finite element model. Residual flux originated from residual magnetization, which could be obtained from a matrix of spatial magnetic flux density measured by sensors and the conversion matrix calculated from the finite element model. By combining the residual magnetization with the background magnetic field, the residual flux could be determined. Experimental results confirmed the accuracy of the proposed method, which was particularly suited for measuring non-uniform residual flux, and also enabled determination of residual flux direction. In comparison to existing methods, this approach offered significant advantages.
4 July 2023 in IEEE Transactions on Instrumentation and Measurement
Magnetic field generated by ferromagnetic materials of underwater detectors varies with seawater pressure, which affects the accuracy of deep-sea resource exploration. Therefore, to precisely simulate the influence of deep-sea pressure on the magnetic field around the underwater detectors, a magneto-mechanical numerical model must be developed. In this paper, a magneto-mechanical coupling model of an oxygen tank was developed in COMSOL Multiphysics. Hysteresis curves of 37Mn-type steel were measured with Superconducting Quantum Interference Device, on which Jiles-Atherton parameters were identified. Initial magnetization of the oxygen tank was calculated according to the obtained conversion matrix and flux density matrix measured by sensors. Furthermore, the concept of equivalent mean field parameter was introduced to describe the magneto-mechanical coupling effect of ferromagnets by improving Jiles-Atherton theory, and three equivalent mean field parameters of 37Mn-type steel were obtained. The irreversibility of magnetization and relationship between the pressure and the spatial magnetic field were experimentally obtained and verified. With the escalation of inner pressure and the augmentation of the stress cycle number, reduction in the spatial magnetic field components occurred. The spatial magnetic field components demonstrated an approximate quadratic relationship with the pressure, while exhibiting an approximately linear association with the stress cycle number.