1 November 2024 in Structural Dynamics
We introduce a hardware–software system for rapidly characterizing liquid microjets for x-ray diffraction experiments. An open-source python-based software package allows for programmatic and automated data collection and analysis. We show how jet speed, length, and diameter are influenced by nozzle geometry, gas flow rate, liquid viscosity, and liquid flow rate. We introduce “jet instability” and “jet probability” metrics to help quantify the suitability of a given nozzle for x-ray diffraction experiments. Among our observations were pronounced improvements in jet stability and reliability when using asymmetric needle-tipped nozzles, which allowed for the production of microjects smaller than 250 nm in diameter, traveling faster than 120 m/s.
10 October 2025 in Lab on a Chip
Liquid microjets are widely used at X-ray free electron laser (XFEL) facilities to deliver a variety of samples to the pulsed X-ray focus for diffraction and spectroscopy experiments. Continuous jets waste sample between exposures, which is a major problem for many samples that are expensive or difficult to produce. Synchronizing microdroplets with the X-ray pulses can greatly improve the sample delivery efficiency by simultaneously reducing flow rate and producing a thicker sample. Here, we develop 3D-printed gas dynamic virtual nozzles (GDVN) designed to eject periodic droplets, and demonstrate synchronization with an external trigger of 1 kHz via piezoelectric transduction. A co-flowing helium sheath gas allows the droplets to eject into vacuum, which minimizes X-ray gas background scatter. Alternatively, the system can operate at atmospheric pressure without the need for humidity control. A control system enhances the synchronization such that 60% of droplet positions fall within 25% of the droplet diameter. Numerical simulations are presented that match well with experimental data and reveal recirculation patterns in the meniscus, along with a detailed view of the dynamics associated with onset of triggered synchronization. The system is designed such that it can be implemented at conventional end-stations at XFEL and synchrotron facilities with minimal modification.
1 September 2026 in IUCrJ
Free-standing thin liquid films offer a convenient way to probe matter in solution without a substrate, where a small sample thickness is required. The production of thin films in a vacuum environment is required for probes that cannot penetrate through a surrounding gas or in cases where the gas produces problematic background noise. Nozzles that produce continuously flowing liquid sheet jets have been employed recently for scattering and spectroscopy measurements at X-ray free-electron lasers (XFELs). However, their performance in vacuum with aqueous samples is complicated by high freezing susceptibility due to a strong evaporative cooling effect. Here, we introduce a vacuum-compatible gas-impinging liquid sheet jet nozzle capable of generating sub-100 nm aqueous films. The introduction of a second axisymmetric helium gas sheath surrounding the liquid orifice enables seamless startup and shutdown within a vacuum environment. We investigated the sheet geometry dependence under varying flow conditions and liquid viscosity and demonstrated its viability for X-ray scattering measurements at a high-repetition-rate XFEL source. Finally, we present potential strategies for reducing sample consumption. Our findings confirm that this nozzle exhibits simplified vacuum operation and may help promote the broader utilization of liquid sheet jets for several experimental applications.