Prince George Jnr Acquah

Prince George Jnr Acquah

Auto-generated profile, based on publicly available information

Prince George Jnr Acquah

Department of Pharmaceutics, Faculty of Pharmacy and Pharmaceutical Sciences, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 November 2022 in BioMed Research International
Verified
Journal Article
Open access
PDF file
FOFrederick William Akuffo Owusu
Frederick William Akuffo Owusu
MBMariam El Boakye-Gyasi
Mariam El Boakye-Gyasi
MBMarcel Tunkumgnen Bayor
Marcel Tunkumgnen Bayor
COChristina Osei-Asare
Christina Osei-Asare
RJRaphael Johnson
Raphael Johnson
RARocklyn Asante
Rocklyn Asante
Pectin is a high molecular weight polymer which is present in virtually all plants where it contributes to the cell structure. Pectin is a high valuable food ingredient widely used as a gelling agent and thickening agent with limited use in the pharmaceutical industry. The objective of this study is to evaluate the suspending properties of pectin from watermelon rind. Tragacanth was used as a standard suspending agent to which the suspending properties of pectin from watermelon rinds were compared with. The extracted pectin was subjected to phytochemical and physiochemical characterization for its safety and suitability to use as a suspending agent. Paracetamol suspensions were formulated using tragacanth concentrations of 0.5% w/v, 1% w/v, and 2% w/v and compared with paracetamol suspensions containing the same concentrations of watermelon pectin. The suspensions were all tested for their pH, sedimentation rate, sedimentation volume, flow rate, and ease of redispersibility over a period of 4 weeks. At the end of the 4‐week period, all formulated suspensions had no changes in their pH values. Suspensions containing the extracted pectin had a lower rate of sedimentation and ease of redispersibility compared to that of tragacanth. In addition, their sedimentation volumes as well as flow rates were comparable to that of the tragacanth formulations. Ultimately, pectin from watermelon rind can serve as a suitable alternative to tragacanth in formulation of pharmaceutical suspensions.

29 September 2023 in The Scientific World Journal
Verified
Journal Article
Open access
PDF file
FOFrederick William Akuffo Owusu
Frederick William Akuffo Owusu
PAPrince George Jnr Acquah
Prince George Jnr Acquah
MBMariam E. L. Boakye-Gyasi
Mariam E. L. Boakye-Gyasi
RJRaphael Johnson
Raphael Johnson
GYGenevieve Naana Yeboah
Genevieve Naana Yeboah
SASandra Obenewaa Asare
Sandra Obenewaa Asare
Natural polymers such as pectin have gained increased utilization in pharmaceutical and biotechnology sectors because they are affordable, easily accessible, nontoxic, and chemically modifiable, with the potential to be biodegradable and biocompatible. Musa paradisiaca (plantain) peels make up 30–40% of the overall weight of the fruit. The extraction of pectin from these residues can therefore be viewed as a possible waste of wealth. This study, therefore, focused on evaluating the suspending properties of pectin obtained from Musa paradisiaca (plantain) peels (through acid and alkaline extraction) and presented an alternative suspending agent in the pharmaceutical formulation of suspensions. The unripe peels of Musa paradisiaca were acquired and authenticated at the Department of Pharmacognosy, Faculty of Pharmacy and Pharmaceutical Sciences, Kwame Nkrumah University of Science and Technology (KNUST), Kumasi, Ghana. Pectin was extracted from the peels using both acid and alkaline extraction processes, respectively, characterized, and evaluated for its phytochemical properties. Different concentrations of the acid and alkaline pectin extracts were employed as a suspending agent in paracetamol suspensions, using acacia gum as a standard. The pectin yields obtained were 4.88% and 7.61% for the acid and alkaline extraction processes, respectively, while phytochemical screening revealed the presence of glycosides, tannins, saponins, and phenols in both extracts. The alkaline pectin extract recorded higher equivalent weight, degree of esterification, ash content, and crude content than the acid pectin extract, while FTIR identified similar functional groups in both acid and alkaline pectin extracts. The test suspensions reported significant differences ( < 0.05) in flow rates, ease of redispersion, sedimentation volumes, and rates compared with acacia gum. Moreover, when the acid and alkaline pectin extracts were compared, significant differences ( < 0.05) were observed in sedimentation rates and sedimentation volumes, suggesting that the extraction method may affect suspending properties. Ultimately, the alkaline pectin extract had better suspending properties than the acid pectin extract; however, they both can be used as an alternative to acacia gum as a suspending agent.

14 March 2024 in Journal of Chemistry
Verified
Journal Article
Open access
PDF file
DODesmond Asamoah Bruce Otu
Desmond Asamoah Bruce Otu
FOFrederick William Akuffo Owusu
Frederick William Akuffo Owusu
PAPrince George Jnr Acquah
Prince George Jnr Acquah
MBMariam El Boakye-Gyasi
Mariam El Boakye-Gyasi
YEYayra Edzor-Agbo
Yayra Edzor-Agbo
MAMary-Ann Archer
Mary-Ann Archer
Fruit waste has emerged as a significant environmental issue in recent years, adding to the global burden. In Ghana, the extensive use of plantains at various stages of ripeness results in substantial waste during each processing stage, leading to disposal challenges. Interestingly, these wastes often hold considerable economic value and can be repurposed as a source of valuable raw materials or products. Given the broad range of uses for plantains and the significant pollution problems associated with their processing, finding new uses for this organic waste has become a pressing necessity. This study investigated the impact of the method of extraction and ripening stages on the physicochemical characteristics of pectin obtained from two different cultivars of plantains, namely, Apem (M) and Apantu (T), which are indigenous to Ghana. Pectin samples were extracted from different stages of ripening (matured-green (G), half-ripe (H), and full-ripe (R)) by the utilization of acidic (D) and alkaline (L) extraction methods. The analyses conducted on the extracted pectin included proximate composition and moisture content determination, assessment of mineral/elemental composition, and solubility testing. Phytochemical investigations were performed to determine the phytoconstituents present in these pectin extracts. The pectin samples were characterized by determining their equivalent weight, methoxyl and anhydrouronic acid content, and the degree of esterification. The pectin yields obtained from the samples ranged from 10.01% to 46.55%. The moisture levels of all the pectins were below 20%. All pectin samples had swelling indexes between 37.5 ± 0.01% and 185.71 ± 0.02%. The equivalent weight (EW) of the pectin samples ranged from 1351.00 ± 0.6 g/mol to 10000.00 ± 0.07 g/mol. The methoxyl content (MeO) fell within the range of 6.2 ± 0.07% to 14.88 ± 0.14%, while the anhydrouronic acid content (AUA) varied between 38.72 ± 0.28% and 86.59 ± 0.21%. The degree of esterification (DE) ranged from 81.22 ± 0.21% to 97.56 ± 0.14%. Furthermore, the result of the micronutrient and mineral analysis indicated compliance with nutritional requirements. The levels of heavy metals were also within acceptable thresholds, thereby adhering to existing regulatory requirements. These findings highlight the significance of both the extraction technique and the ripening stage on the physicochemical properties of the extracted pectins. Generally, the extracted pectins possess excellent nutritional quality and physicochemical properties, rendering them a very valuable resource that holds promising potential for use in the food and pharmaceutical sectors.

1 January 2024 in The Scientific World Journal
Verified
Journal Article
Open access
DODesmond Asamoah Bruce Otu
Desmond Asamoah Bruce Otu
FOFrederick William Akuffo Owusu
Frederick William Akuffo Owusu
MBMariam El Boakye-Gyasi
Mariam El Boakye-Gyasi
RJRaphael Johnson
Raphael Johnson
PAPrince George Jnr Acquah
Prince George Jnr Acquah
MAMary-Ann Archer
Mary-Ann Archer
Pharmaceutical formulations have traditionally relied on plants and their derivatives for various APIs and excipients. In Ghana, the widespread utilization of plantains, irrespective of their ripeness, generates significant waste at every stage of processing, posing disposal issues. Fascinatingly, these wastes, often discarded, possess significant economic potential and can be recycled into valuable raw materials or products. Pectin, a polysaccharide that occurs naturally, has seen a surge in interest in recent times. It has found widespread use in the pharmaceutical sector, particularly as a binding agent in tablet formulations. This study aimed to evaluate pectin from two popular plantain varieties, Apem (M) and Apantu (T) at different ripening stages, for pharmaceutical use as a binding agent in immediate‐release tablets. The ripening stages selected were the matured‐green (G), half‐ripe (H), and full‐ripe (R). Acid (D) and alkaline (L) mediums of extraction were employed for each ripening stage for both varieties. Wet granulation method was used to prepare the granules using paracetamol as a model drug, and their flow properties were subsequently assessed. Postcompression tests including, hardness, friability, weight uniformity, disintegration, assay, and in vitro dissolution were also assessed. Granules from all formulation batches had good flow properties indicated by their angle of repose (14.93 ± 1.41–21.80 ± 1.41), Hausner ratio (0.96 ± 0.27–1.22 ± 0.02), and compressibility (%) (7.69 ± 0.002–20.51 ± 0.002). All the tablets passed the uniformity of weight with none deviating by ±5%. The hardness of all the formulated tablets ranged between 3.96 ± 0.32 and 13.21 ± 0.36, while the friability for all tablets was below 1%. The drug content was between 100.1 ± 0.23% and 103.4 ± 0.01%. Tablets formulated with pectin as a binding agent at concentrations of 10% w/v and 15% w/v successfully met the disintegration test criteria for immediate release tablets. However, those prepared with a concentration of 20% w/v (MGL, MHD, MHL, MRD, MRL, TGL, THD, THL, and TRL) did not pass the disintegration test. Consequently, all batches of tablets successfully met the dissolution test requirement (Diss, Q > 75%), except for the batches that did not pass the disintegration test (Diss, Q < 75%). Ultimately, pectins extracted from the peels of Apem and Apantu at different ripening stages using acid and alkaline extraction can be commercially exploited as pharmaceutical binders at varying concentrations in immediate‐release tablets.

5 December 2023 in Journal of Chemistry
Verified
Journal Article
Open access
PDF file
OAOfosua Adi-Dako
Ofosua Adi-Dako
FOFrederick William Akuffo Owusu
Frederick William Akuffo Owusu
IAIsaac Yaw Attah
Isaac Yaw Attah
DKDoris Kumadoh
Doris Kumadoh
PJPrince George Acquah Jnr
Prince George Acquah Jnr
MAMary-Ann Archer
Mary-Ann Archer
A combination of inorganic and organic hybrid systems is of high research interest as they provide novel hybrid systems for the improvement of existing properties, overcoming limitations of the parent materials, and for the optimization of their controlled release potential. This study sorted to develop and pharmaceutically assess the release profile of diclofenac sodium using cocoa pod husk (CPH) blended with different proportions of either talc or bentonite as multiparticulate composite release modifiers. Preformulation investigations of the multiparticulate hybrid systems included pH, swelling index, moisture content, elemental contents, and flow properties. The FTIR was also used to investigate the compatibilities between pectin and bentonite (PB), pectin and talc (PT), and diclofenac and pectin-talc (DPT), as well as diclofenac and pectin-bentonite (DPB). The diclofenac content, uniformity of the weight of capsules, in vitro drug release, and the kinetics and mechanism of release of diclofenac from the hybrid systems were also investigated using mathematical models. The pectin yield was 23.3, with the water-holding capacities of pectin-talc (PT) and pectin-bentonite (PB) hybrid systems being 6.4 and 5.0, respectively. The swelling indices of PT and PB were 110.0 and 130.0 in 0.1M HCL at pH 1.2 and 130.0 and 149.0 in phosphate buffer at pH 6.8, respectively. This system was also found to exhibit excellent flow properties, and there were no diclofenac-excipient interactions. All formulated batches passed the pharmacopoeial and nonpharmacopoeial tests. They also demonstrated controlled release properties via different release kinetics and mechanisms. This study shows that the pectin-talc and pectin-bentonite multiparticulate composites could be used as release modifiers in pharmaceutical preparations.

10 January 2025 in Journal of Food Quality
Verified
Journal Article
Open access
EQEkow Quansar
Ekow Quansar
MBMarcel Tunkumgnen Bayor
Marcel Tunkumgnen Bayor
JAJanet Anchirinah
Janet Anchirinah
SGStephen Yao Gbedema
Stephen Yao Gbedema
FOFrederick William Akuffo Owusu
Frederick William Akuffo Owusu
KBKawsar Adam Baninie
Kawsar Adam Baninie
The Nile tilapia, a fish of the Teleost group, is economically valuable due to its ease of cultivation, high growth rates and resistance to environmental conditions and is increasingly used for waste conversion. The aim of this study was to evaluate the physiochemical properties and potential applications of oils derived from the entrails of Nile tilapia obtained from four different farming sites in Ghana. The tilapia fish oil (TFO) was extracted by the wet rendering method. The refractive index, fatty acid profile, colour and cholesterol content of the TFO samples (TFS1, TFS2, TFS3 and TFS4) were determined using a refractometer, GC–MS, chromameter and UV spectrophotometer, respectively. More than 65% of fatty acids present in TFS1 to TFS4 were unsaturated fatty acids (UFAs). Oleic acid and its isomer were present in the oils as follows: TFS2 (58.37%), TFS3 (57.28%), TFS1 (43.89%) and TFS4 (41.71%). The following physicochemical properties of TFS1 to TFS4 were determined: vitamin A (0.70–2.15 mg/100 g), vitamin E (0.03–0.009 mg/100 g), acid value (0.27–0.66 mg KOH/g), peroxide value (0.009–4.488 meq/kg), iodine value (77.87–74.62 mg/g), saponification value (247.93–592.27 mg KOH/g), cholesterol content (162.33–438.33 mg/100 mL) and moisture content (1.08%–3.25%). These findings indicate that TFOs have potential applications in the food and pharmaceutical industries. However, the differences in physicochemical properties must be considered during product development to ensure optimal quality and marketability of the final product.