Rezvan Hosseini Rad

Rezvan Hosseini Rad

Auto-generated profile, based on publicly available information

Rezvan Hosseini Rad

Leibniz Institute for Plasma Science and Technology

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 December 2022 in Chemical Engineering Journal
Verified
Journal Article
Closed access
RRRezvan Hosseini Rad
Rezvan Hosseini Rad
VBVolker Brüser
Volker Brüser
MSMilko Schiorlin
Milko Schiorlin
JSJan Schäfer
Jan Schäfer
RBRonny Brandenburg
Ronny Brandenburg

11 July 2025 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
VBVolker Brueser
Volker Brueser
RRRezvan Hosseini Rad
Rezvan Hosseini Rad
RBRonny Brandenburg
Ronny Brandenburg
Solid electrolyte fuel cells (SOFC) have the highest efficiency of all fuel cells at around 60 to 65%. Further advantages are the low requirements on the purity of the fuel gas and the fact that no precious metals have to be used as catalysts due to the high temperatures. The problem with SOFCs is the ageing of the electrodes, which causes a reduction in the phase boundary between the electrode and the solid electrolyte. This leads to a reduction in performance in the cell. One possible solution to the problem could be the use of a low-temperature plasma instead of a metal electrode. The advantages compared to conventional electrodes would be that the plasma electrode does not exhibit the typical degradation phenomena and the exchange surface at the phase boundary to the solid electrolyte would be significantly larger. To investigate the plasma-induced cathode reaction on oxide ion-conducting solid electrolyte cells, a planar arrangement for a dielectric barrier surface discharge (DBD) was combined with a solid electrolyte cell. The dielectric for the DBE consisted of a quartz disc. The plasma was generated at the grounded and structured electrode of the DBD. Yttrium-stabilised zirconium oxide was used as the solid electrolyte for the electrochemical cell. Platinum was chosen as the electrode material for both arrangements. The arrangements were combined in such a way that the plasma of the DBD was in contact with a platinum electrode of the solid electrolyte cell including the solid electrolyte surface. The distance between the dielectric and the solid electrolyte surface was 3 mm, the surface area of the solid electrolyte was 0.6 mm2 and the temperature was 750 °C. In a first experiment, air was used as a gas on both sides of the electrolyte. When a voltage of 9 kVp-p and 6.5 kHz was applied to the plasma source, an electric current of 55 µA was generated in the solid electrolyte cell. The side of the cell facing the plasma became the cathode. These results show that a low-temperature plasma can fulfil the function of an electrode and also generate an ion current in the solid electrolyte. It support the oxygen reduction reaction.

11 July 2025 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
RRRezvan Hosseini Rad
Rezvan Hosseini Rad
VBVolker Brueser
Volker Brueser
Ammonia synthesis is of significant interest due to its critical role in agriculture and its utility as a precursor for various chemicals. It also has wide industrial applications, including refrigeration, fermentation, and energy storage. As a carbon-free hydrogen carrier, ammonia holds great potential for sustainable production from water and air. The Haber–Bosch process is the dominant commercial method for ammonia synthesis. However, it is energy-intensive, requiring high temperatures (~500°C) and pressures (200–300 bar). Plasma technology provides a promising alternative, offering a cleaner and more sustainable method for synthesizing ammonia. By integrating plasma technology with electrolysers, this approach facilitates the production of hydrogen (from water) and excited nitrogen species (from plasma operation with nitrogen gas), which combine to form ammonia. It is expected that this method is more energy- and cost-efficient than traditional processes, especially with the increasing availability of renewable electricity. In this work, we present a novel reactor design that integrates a cathode of an water electrolyser in a planar Dielectric Barrier Discharge (DBD) plasma reactor . The reactor features three electrodes: a high-voltage electrode for plasma generation, an anode for the electrolyser, and a shared electrode that functions as both the ground electrode for the plasma reactor and the cathode for the electrolyser. This unique design places the plasma discharge in close proximity to the hydrogen generation site, which is expected to enhance ammonia synthesis efficiency. The electrolyte solution used is 1 M KNO3 in distilled water. The electrolyser operates at a constant current between 0.5 and 1 A, regardless of whether the plasma is active. However, plasma characteristics—including distribution mode, total cell capacity, and inception voltage are significantly influenced by the electrolyser's operation. This novel system highlights the potential for synergistic interactions between plasma and electrolytic processes, opening the way for more efficient and sustainable ammonia synthesis. Keywords: Ammonia Synthesis, Electrolyser, Dielectric Barrier Plasma.