1 July 2019 in IEEE Transactions on Industrial Electronics
This paper proposes a novel spoke-type permanent magnet (PM) motor with auxiliary salient poles (ASPs). With these ASPs, unequal ASPs and shifted ASPs in the circumferential direction can be realized and combined to reduce the torque pulsation, while their functions are different. Unequal ASPs are employed to eliminate the second-order torque pulsation. Nevertheless, the shifted ASPs are selected to reduce the first-order torque pulsation. Additionally, the relationship between the unequal angle or shifted angle of the ASPs and the order of the torque pulsation is revealed. Furthermore, the revealed principle of torque pulsation reduction can be extended to other slot-pole combinations. Finally, a prototype is manufactured for experiments to evaluate the low torque pulsation spoke-type PM motor. Through theoretical analysis and experimental testing, it is verified that the proposed motor offers low torque pulsation and that the revealed principle for torque pulsation reduction of different orders is feasible and effective.
27 November 2020 in IEEE Transactions on Transportation Electrification
Both of consequent-pole permanent magnet (CPM) motor and spoke-type PM motor have the potential to reduce the consumption of PMs while suffering from the high torque pulsation. This paper proposes a new hybrid rotor CPM motor, in which the hybrid rotor is composed of consequent-pole surface-mounted PM (SPM) modules and spoke-type PM rotor modules. Compared with the existed hybrid rotor CPM motor with half of spoke-type PM rotor modules, the whole of spoke-type PM rotor modules and their shifting are capable to adjust the harmonics of the rotor-MMF, which is the benefit to improvement of the torque performances. To obtain high torque performances and low PM volume, multi-objective optimization is employed to optimize the key parameters. Afterward, the proposed motor is compared with three PM motors. The results show that compared with the SPM motor, the proposed CPM motor offers high PM torque and PM utilization ratio like other CPM motors. Besides, the torque pulsation is reduced significantly compared with the traditional CPM motor. Hence, the proposed motor offers a high PM utilization ratio and low torque pulsation simultaneously. Through the finite element method (FEM) analysis and experimental test, the merits of the proposed hybrid CPM motor are verified.
15 November 2019 in IEEE Transactions on Industrial Electronics
13 August 2019 in IEEE Transactions on Energy Conversion
This paper proposes a method to reduce the torque pulsation of the three-phase fractional-slot concentrated-winding (FSCW) interior permanent magnet (IPM) motor by lowering sub-harmonics. The key principle of this method is the selection of an optimized six-layer winding with different numbers of conductors. Firstly, the interaction of stator-rotor magnetomotive force (MMF) which contributes to the torque pulsation is analyzed. Additionally, the relationship between sub-harmonics (1st sub-harmonic and 2nd sub-harmonic) and torque pulsation orders is revealed. Then, different numbers of conductors are adopted in coils to eliminate the 2nd sub-harmonic. Nevertheless, the 1st sub-harmonic increases in the two-layer and four-layer windings. Therefore, the optimized six-layer winding is employed to suppress the 1st sub-harmonic and ensure that the 2nd sub-harmonic is zero. Besides, there are almost no other harmonics except the main harmonic and slot harmonics in the proposed IPM motor. Hence, the torque pulsation can be greatly reduced even under different current angles. Furthermore, the principle for torque pulsation reduction by lowering sub-harmonics is revealed. The effectiveness of the proposed method is verified through the comparisons with finite element analysis and experimental test.
27 March 2019 in International Journal of Thermal Sciences